Horizontal tailplane fitting, rear part
Item no.: B40-0824
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders.
Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
To change this part you may also need screws and washers that can be added as an option.
€ 360.10
Description
The optionnal screws/washers contains the following:
- 1x 6k-screw 08025 (Ref L01-0025)
- 1x Schnorr-safety washer M8, Form S (Ref L01-0379)
- 2x Allen screws M06x21 - 8.8, DIN 912 galvanized (Ref L01-0585)
- 2x Schnorr-safety washers M6, Form S (Ref L01-0378)
- 2x washers 6,4, DIN 9021 / ISO 7093-1 galvanized (Ref L01-0108)
- 2x lock nuts M 6-8, DIN 985 galvanized (Ref L01-0129)
This item is in all modern Schempp-Hirth gliders. Some older gliders that have been modified also use it. Please look at the picture to be sure that this is the part you need.
This part is essential and not simple to change. As for all the part we are selling online, you need to ensure that the person doing the replacement is entitled to do it and has the skills to do so.
If you have any questions, please contact us: shop@schempp-hirth.com
The EASA Form 1 is included.
Characteristics
| Country of origin |
|
| CustomsTariffNumber |
|
Properties
| package-height | 53 mm |
| package-length | 130 mm |
| package-weight | 0.611 kg |
| package-width | 129 mm |
Suggested products
-
Single seater horiz. tailplane sealing for all Discus-2, Ventus-2 and the Ventus-3 performance
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 94,98 x 370,00 mm. It is designed for the Discus, Ventus-2c and Ventus-3 Performance. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself using a Tesa Foam roll.
from 1 € 16.77 incl. 19% VAT
€ 14.09 -
Double seater horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 98,80 x 435,00 mm. It is designed for the Duo Discus and the Arcus horizontal tailplanes. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself from a Tesa Foam roll.
from 1 € 15.51 incl. 19% VAT
€ 13.03 -
Elevator U-bracket
This item is part of the elevator control and horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
When you remove the previous U-bracket, keep the screws! If they are not damaged, we advise you to use them again. However, we are providing new lock washers.
If you also need the screws, the reference are: 2x 6k screws 06036 LN 9037 and 4x 6k screws M06x18 - 8.8 DIN933 / ISO 4017 (See suggested products).
from 1 € 288.11 incl. 19% VAT
€ 242.11 -
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
Schnorr-safety washer
Safety washers Form S available in M6 and M8.
These washers are used, among other things, to secure the rear part of the horizontal tail fitting and the elevator drive U-bracket.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Allen screw M06x21 - 8.8, DIN 912 galvanized
This screw is mainly used to secure the rear part of the horizontal tail fitting.from 1 € 3.20 incl. 19% VAT
€ 2.69 -
washer 6,4, DIN 9021 / ISO 7093-1 galvanized
This washer is mainly used on the rear part of the horizontal tail fitting.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Selflock nut M6-8 DIN 985U
from 1 € 0.24 incl. 19% VAT
€ 0.20