-
Brake pads for Cleveland caliper 30-9
These brake lining (Tost p/n 075865) are used on brake assembly 30-9.
It can be mounted to 4′′, 5′′ and 6′′ disk brake wheels of the series Penta, Tria and Classic and on the original Cleveland brakes- wheel system.
Different system has been used and several TN have been approved. Please look carefully to your brakes and order similar brake pad.
from 1 € 72.08 incl. 19% VAT
€ 60.57 -
Case for the main pin
Protective cover for the main pin made of Supra-Tex. Designed to store and protect the main pin from dirt and damage while the glider is not rigged.
from 1 € 71.73 incl. 19% VAT
€ 60.28 -
Horizontal tailplane mounting tool, with Ventus-3 extras.
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip and an extra tool for the ballast plugs.from 1 € 71.39 incl. 19% VAT
€ 59.99 -
Main wheel axle
This is the axle for the main landing gear of almost all Discus, Discus-2, Ventus-2 and Ventus-3.
It is 215 mm long, including a M12x1,5 head (4 mm long) and a M12 screw thread (12 mm long).
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with carbon fiber undercarriage need another axle . If you are not sure, measure the axle that is currently used or contact Schempp-Hirth spare part.
You may also want to buy the 8 mm M12x1,5 castle nut which is used to secured the axle (See suggested products).
from 1 € 70.50 incl. 19% VAT
€ 59.24 -
Ignition wire for Arcus M
This ignition cable is 35 cm long and it is used for the Arcus M.
You will need 4 units. if you want to change all of them.
from 1 € 70.25 incl. 19% VAT
€ 59.03 -
Kit for brake pull cable for single seater with drum brake
This comprehensive kit ensures compatibility with all single-seater gliders equipped with drum brakes and provides the necessary components for a smooth brake cable replacement.
The cable comes with a standard 5.5 mm nipple, which fits most modern gliders that have a 6.2 mm handle hole. For older models or those with larger handle holes, an additional nipple is included, suitable for handles with an 8.5 mm hole.
The kit includes:
- 1600 mm of 2 mm cable with a 5.5 x 10 mm nipple
- 1 x Nicopress oval sleeve (1.5-2 mm, NT281C-A)
- 1 x 2 mm thimble
- 1 x Nipple No. 33A
- 1 x Nipple support No. 21A (8 x 9 mm)
from 1 € 68.92 incl. 19% VAT
€ 57.92 -
Mylar convex 0,19 mm, 22, 25 and 30 mm, Roll
This Mylarband, also named Hostaphanband or Profilband, is pre-curved and used for control surface sealing.
It is available in 3 different widths: 22, 25 and 30 mm. They are often refered as "Profilband 22mm / 0.19 mm strongly vaulted (vorgewölbt)", "Profilband 25 mm / 0.19 mm gewölbt" and "Profilband 30mm / 0.19 mm stark vorgewölbt".
A roll contains 15 meters of tape.
Note, 3 other models exist: plain, asymmetric curved and asymetric curved scarfed. Please refer to your glider control sealing instructions for more information.
from 1 € 68.37 incl. 19% VAT
€ 57.45from 1 € 54.62 incl. 19% VAT
€ 45.90from 1 € 51.76 incl. 19% VAT
€ 43.50from 1 € 74.79 incl. 19% VAT
€ 62.85 -
Bearing bracket for elevator bell crank
This item is used to fix the elevator bell crank to the fuselage on almost all Schempp-Hirth gliders.
Screws and washers are provided.
from 1 € 68.01 incl. 19% VAT
€ 57.15 -
Elevator- front trim knob for Arcus, all Duo Discus and all Nimbus-4D
This is the handle for the trim of the Arcus, Duo Discus XL and Nimbus-4DL.
The roll pins are included.
Please note the pin roll can be bought separatly (see suggested product). If your glider is older than April 2015, you need to use the 2x14 mm roll pins instead of 2x16 mm.
from 1 € 62.25 incl. 19% VAT
€ 52.31
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.