-
Pneumatic spring 1000 N for engine mount for all Arcus T and Duo Discus T
This pneumatic spring is 820 mm long. It is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 46.84 incl. 19% VAT
€ 39.36 -
Shim washer kit for 18 mm wing bolt
These washers are used to adapt the distance of the wing to the fuselage. The kit contains eight 0,5 mm thick washers and four 0,8 mm thick washers.
They fit a 18 mm wing bolt. That includes the front and back bolts at the wing root of the double seaters.
These washers internal diameter is 17,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
from 1 € 48.27 incl. 19% VAT
€ 40.56 -
Brake pull cable for the front seat of the Arcus and Duo Discus xL with Magura-type disc brake
This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.
The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple. The black segmented cable housing is included.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
The EASA Form one is included.
from 1 € 49.50 incl. 19% VAT
€ 41.60 -
Brake pull cable for the front seat of the Arcus and Duo Discus XL with Magura-type disc brake
This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.
The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
The EASA Form one is included.
from 1 € 49.61 incl. 19% VAT
€ 41.69 -
Canopy window rail
The canopy window rail device including screws. The screws are in metal but as an option, you can order it in plastic.
These rails are made for the Mecaplex canopy. It is the only model currently available, but you may need to customise it a little if you have a Weis canopy.
from 1 € 49.98 incl. 19% VAT
€ 42.00from 1 € 55.09 incl. 19% VAT
€ 46.29from 1 € 55.09 incl. 19% VAT
€ 46.29from 1 € 110.17 incl. 19% VAT
€ 92.58 -
Wing attachment bolt for double seaters, front
The visible part of the pin is 48 mm long and has a diameter of 18 mm. The inner part is 42 mm long and has a diameter of 40 mm.
It is used on the wing roots front part of the double seaters as well as for the front and rear roots of the Janus.
from 1 € 50.28 incl. 19% VAT
€ 42.25 -
Tailwheel axle
This axle is adapted to the most used Schempp-Hirth tailwheels: the original 200x50 with or without led.
It does not fit the steerable tail wheel of the Arcus M and the Ventus-3M. For these gliders, you must use the reference B40-2946.
It is 98 mm long and 12 mm in diameter.
It is sold with the safety ring-spring (L01-0663).
A washer, that can be necessary on some gliders, is sold as an option.
from 1 € 51.56 incl. 19% VAT
€ 43.33 -
Water filler cap
This sealing cap is for the Ventus-2, Discus-2, Duo Discus and the first Arcus.
The cap diameter is 36 mm and it is 5 mm high with a M6 hole on the side (B40-1226). Older gliders can have the same cap but the system may be different.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 52.32 incl. 19% VAT
€ 43.97 -
Pressure gauge extension for MH oxygen bottles
This adapter is necessary for the MH Oxygen bottle.
Indeed the neck of these bottle is short and wide and, without the extension, the pressure gauge prevents the neck holder from being installed.
from 1 € 54.00 incl. 19% VAT
€ 45.38
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.