-
Allen screw M06x21 - 8.8, DIN 912 galvanized
This screw is mainly used to secure the rear part of the horizontal tail fitting.from 1 € 3.20 incl. 19% VAT
€ 2.69 -
Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.
This silent block is used for the cooler of the Arcus M, Ventus-3 and Quintus engine.
The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.
from 1 € 3.06 incl. 19% VAT
€ 2.57 -
Pushrod guide ball cage, 25x3x20 mm
This pushrod guide ball cage measures 25 × 3 × 20 mm.
Please note that another model exists with dimensions 29 × 3 × 20 mm.
Depending on the glider, you may need one, the other, or both typesfrom 1 € 2.94 incl. 19% VAT
€ 2.47 -
Shrink hose CGPT-12.7/6.4-0
This high-quality, flexible shrink tubing is used for insulation and protection of cables and connections – including many fuel lines and some electronic components.
Minimum diameter before shrinking: 12.7 mm
Diameter after shrinking: 6.4 mm
It is sold by the meter.
from 1 € 2.77 incl. 19% VAT
€ 2.33 -
Rubber buffer 25x10, M6x10 for the E-Box / radiator
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM, all Arcus M, all Ventus-3M and the Quintus.
The head is 10 mm and the screw 10 mm. Its head diameter is 24 mm. Look at the model(s) that you want to replace and order the same.
from 1 € 2.74 incl. 19% VAT
€ 2.30 -
Landing gear door spring
The tension spring Z-109AI is used for the single seater landing gear doors.
Its dimensions are 77 x 11 x 11 mm
from 1 € 2.59 incl. 19% VAT
€ 2.18 -
Tension spring for Discus trim system
Tension Spring for the Discus-2 Trim System, Part No.: RZ-123 I
Tension spring for the trim system of the Discus-2 series. 3 springs are required per aircraft.
It is Ø 1,6 x 14,1 x 59 mm
from 1 € 2.59 incl. 19% VAT
€ 2.18 -
Tension spring for double seater back seat rudder pedal
This tension spring (ref RZ-124) is used in the rudder pedal of the Arcus, Duo Discus, and Nimbus-4D gliders, in the rear position, with two springs installed per glider. It is also used for the doors of the engine box in single seater.from 1 € 2.38 incl. 19% VAT
€ 2.00 -
Landing gear door hinge for single seater
These hinges are used to fix the landing gear door of almost all single seater.
Their dimensions are: 30 x 30 x 0,8 mm
The countersunk screws (fuselage side) and countersunk-head rivet with their washers (door side) can be ordered as an option.
from 1 € 2.13 incl. 19% VAT
€ 1.79
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.