-
Polyflex-hose for Ventus-2 and Discus-2 using the disc brakes type Magura (Option)
This system is used for the Ventus-2 and the Discus-2 which are using the 5" Cleveland wheel from TOST and with a “Magura” cylinder brake.
Polyflex-hose is 1004 CK and it is 1080mm.
from 1 € 186.57 incl. 19% VAT
€ 156.78 -
New suspension for the powerplant spindle drive on Arcus M
Optional Spindle Drive Modification for Maintenance & Production according to TN A532-12
Our spindle drive system, responsible for extending and retracting the power plant, is designed with rubber-mounted suspension for optimal vibration isolation. This optional modification increases reliability.
Within the scope of maintenance and manufacture, it is also permissible to replace only the front, fuselage-side suspension (Action 1) or only the rubber mount of the rear, propeller arm-side suspension (Action 2).
- Kit 1: Front Suspension: Integrated within the fuselage
- Kit 2: Rear Suspension: Mounted on the propeller arm
from 1 € 188.29 incl. 19% VAT
€ 158.23from 1 € 336.00 incl. 19% VAT
€ 282.35from 1 € 242.15 incl. 19% VAT
€ 203.49from 1 € 578.15 incl. 19% VAT
€ 485.84 -
Tyre 2.80/2.50-4 for double seater nose wheel
This 2.80/2.50-4 tire is used for the front wheel of the Janus, Duo Discus, and Arcus.
Previously, a 3" tire (D 3.00-4 IND IC35 4PR) was used, but that model has been discontinued. This tire serves as a suitable replacement.
from 1 € 190.40 incl. 19% VAT
€ 160.00 -
Landing gear pneumatic tension spring for Duo Discus XL und Arcus with a TOST wheel
This gaz strut is 210N and it is used for the landing gear on the Arcus and Duo Discus XL.
Important: It is not adapted for Beringer wheels.
Two models exist. The pivot ball was first associated with a M5 screw, before beeing replace by a M6 screw in 2015. Please measure the diameter of the screw on the part that you are currently using, and order the same.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 189.33 incl. 19% VAT
€ 159.10 -
Coolant hoses set for SOLO 2625 02
This hose set is designed for use with the Solo 2625 02 and 02i engines in the Arcus M and Arcus M edition 2020 gliders.from 1 € 201.01 incl. 19% VAT
€ 168.92 -
Ignition coil for Solo 2625 type "i" from PVL
The ignition box from PVL is used for the Solo 2625-01i and 2625-02i but not for the other version. The Solo 2625-01 and 2625-02 need the ignition coil from Ducati.from 1 € 207.30 incl. 19% VAT
€ 174.20 -
Fin tank valve for all single seaters (exc. Ventus-3)
This is the complete tank dump valve assembly. It is used for all single seaters except for the Ventus-3.
Arcus and Duo Discus xL have other model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our sparepart team.
from 1 € 213.13 incl. 19% VAT
€ 179.10 -
GFRP-cover for Ventus-3M starter ring gear, TN 627-5
This GFRP-cover (G000168) is used for the TN 627-5.
That is recommanded for the Ventus-3M (SN < 183).
Please read carefully the Technnical Note.
from 1 € 213.43 incl. 19% VAT
€ 179.35 -
Horizontal tailplane fitting, snap lock
This item is part of the stabilizer fixation of all the modern Schempp-Hirth gliders.
It is possible to replace or change it for a bigger pin diameter to compensate the ageing of the parts on the stabilizer.
This item is delivered with 4 allen screw M06x30 - 8.8, DIN 912 / ISO 4762 galvanized (L01-0119) and 4 Schnorr-safety washer M6 (L01-0378).
from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.