-
Kit pylon arresting wire for Ventus- 2cM, Ventus-3M, Arcus M, Nimbus-4M and -4DM
The kit contains the cable (diameter 3,2 mm), 2 nicopress-oval sleeves, 2 thimbles and some silicone tube. One side is already assembled.
It can be use for the Ventus-2cM, Ventus-3M, the Nimbus-4M and -4DM and the Arcus M.
Please refer to the maintenance manual for the installation.
from 1 € 114.66 incl. 19% VAT
€ 96.35 -
Washer for spar bridge
This washer DIN 9021 M8, 8,4 bright countersunk is mainly use to fix the O2-bottle holder when the holder is over the spar bridge.
from 1 € 6.84 incl. 19% VAT
€ 5.75 -
Fin tank valve for all single seaters (exc. Ventus-3)
This is the complete tank dump valve assembly. It is used for all single seaters except for the Ventus-3.
Arcus and Duo Discus xL have other model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our sparepart team.
from 1 € 213.13 incl. 19% VAT
€ 179.10 -
Horizontal tailplane mounting tool
The Schempp-Hirth iconic tool!
from 1 € 23.11 incl. 19% VAT
€ 19.42 -
Yellow T-handle, for tow-hook actuation
from 1 € 6.13 incl. 19% VAT
€ 5.15 -
Springs for wingtip aileron of the Duo Discus XL
This pair of springs is used for the outer wing panel aileron of the DuoDiscus XL. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 2 mm and it makes more than 2,5 coiled.
The springs used for the Duo Discus and the Ventus-2 is only 1,5 mm. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 39.29 incl. 19% VAT
€ 33.02 -
Wing attachment bolt for Discus and Ventus, front
The visible part of the pin is 38,5 mm long with a 14 mm diameter. The inner part is 35 mm long and has a diameter of 40 mm.
It is used on the wing roots front part of the Discus, Discus-2, Ventus, Ventus-2c and Ventus-3S.
Some slightly older gliders, such as the Discus b, use this part for both the front and the back. Others will have a longer pin at the back. You can find it in the suggested product list. Please check carefully which version your glider uses.
from 1 € 61.26 incl. 19% VAT
€ 51.48 -
Landing gear pneumatic tension spring for Duo Discus XL und Arcus with a TOST wheel
This gaz strut is 210N and it is used for the landing gear on the Arcus and Duo Discus XL.
Important: It is not adapted for Beringer wheels.
Two models exist. The pivot ball was first associated with a M5 screw, before beeing replace by a M6 screw in 2015. Please measure the diameter of the screw on the part that you are currently using, and order the same.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 189.33 incl. 19% VAT
€ 159.10 -
Kit for 5-year-special inspection, SOLO turbo 2350 (SN after 338)
In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...
If your engine is before SN 339, please use the kit for engine Solo 2350 (SN<339).
This kit is not adapted for the SOLO 2350c and 2350d.
from 1 € 230.32 incl. 19% VAT
€ 193.55
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.