-
New suspension for the powerplant spindle drive on Arcus M
Optional Spindle Drive Modification for Maintenance & Production according to TN A532-12
Our spindle drive system, responsible for extending and retracting the power plant, is designed with rubber-mounted suspension for optimal vibration isolation. This optional modification increases reliability.
Within the scope of maintenance and manufacture, it is also permissible to replace only the front, fuselage-side suspension (Action 1) or only the rubber mount of the rear, propeller arm-side suspension (Action 2).
- Kit 1: Front Suspension: Integrated within the fuselage
- Kit 2: Rear Suspension: Mounted on the propeller arm
from 1 € 188.29 incl. 19% VAT
€ 158.23from 1 € 336.00 incl. 19% VAT
€ 282.35from 1 € 242.15 incl. 19% VAT
€ 203.49from 1 € 578.15 incl. 19% VAT
€ 485.84 -
Felt ring for 14 c6 bearing
Thesef felt rings measure 20x10 mm and are 3 mm thick. They are designed for 14 C6 bearings.
Please note that a thinner model (L07-0594) is used for 10 C6 bearings.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Brake pad for Tost BZT2 (Post-2017 Models)
These brake linings (Tost P/N 080949) are designed for the BZT2 brake assembly installed after 2017 with a thread M10x1. It is not compatible with the model with a thread NPT See drawing.
The BZT2 system is compatible with 5″ and 6″ disc brake wheels from the Penta and Classic series. It is commonly installed on the Ventus-3 and Arcus edition 2020 models.
Please note that different braking systems have been used over time, and several Technical Notices (TN) have been approved. Carefully inspect your brakes before ordering to ensure you select the correct brake pad.
from 1 € 116.86 incl. 19% VAT
€ 98.20 -
Bracket for battery box
This fiberglass bracket is designed for 7.5 Ah battery holders.
It has a width of 38 mm and fits a 97 mm battery. The shape is straight.
A similar model (F60-0651) features a bend and is used in several gliders, including the Duo Discus XL and the Arcus. Please check the model installed in your glider carefully before purchasing.
from 1 € 33.84 incl. 19% VAT
€ 28.44 -
Self-locking hexagonal-head nut, M8, DIN 14441
This slotted hexagonal-head nut, M8, DIN 14441 is copper plated and is commonly used for rudder fixation.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Compression spring for airbrake (conical)
This spring is designed for the airbrakes of all Schempp-Hirth gliders ecxcept the Ventus-3.
The spring is 1 x 10 x 30 mm.
Depending on your glider model, each airbrake may require 2 of these springs.
Important Note: This spring is used on the outside of the airbrakes. The other spring are straight (ref L03-0033). You can find them among our suggested products.
from 1 € 0.73 incl. 19% VAT
€ 0.61 -
Compression spring for airbrake (straight shape)
This spring is designed for the airbrakes of all Schempp-Hirth gliders.
The spring is 0.8 mm x 7.8 mm x 30 mm.
Depending on your glider model, each airbrake may require between 9 and 11 of these springs.
Important Note: The exterior springs often differ from this ones. You can find the suitable exterior springs (ref L03-0032) among our suggested products.
from 1 € 0.51 incl. 19% VAT
€ 0.43 -
AIRBATT 12V 20Ah tail battery for Duo Discus and Arcus
LiFePO Battery for the Tail of the Duo Discus or Arcus
Tested and in like-new condition, but a few years old.
Reference. 8000652 AIR-LFP1220-1
12V 20Ah c20 256WhPlease note: Shipping is not available. Pick-up only!
from 1 € 357.00 incl. 19% VAT
€ 300.00 -
Elevator transition for Duo Discus, Arcus and Nimbus-4D
This part can be adapted to fit the Duo Discus, Duo Discus X, Duo Discus XL, as well as the Arcus, Arcus Edition 2020, and Nimbus-4D.
It measures approximately 147 mm in width and 157 mm in length.
Please note that the part is sold in an untrimmed form, so you will need to cut it to ensure a proper fit for your glider.
from 1 € 172.92 incl. 19% VAT
€ 145.31 -
Kit for brake pull cable for the Duo Discus front seat
This comprehensive kit ensures compatibility with all Duo Discus equipped with a master cylinder model 7 / brakes 30-9. It provides the necessary components for a smooth brake cable replacement.
The cable comes with a standard 5.5 mm nipple, which fits most modern gliders that have a 6.2 mm handle hole. For older models or those with larger handle holes, an additional nipple is included, suitable for handles with an 8.5 mm hole.
The kit includes:
- 4000 mm of 1,8 mm cable
- 1 x Nicopress oval sleeve (1.5-2 mm, NT281C-A)
- 1 x 2 mm thimble
- 1 x Nipple No. 33A
- 1 x Nipple support No. 21A (8 x 9 mm)
from 1 € 107.21 incl. 19% VAT
€ 90.09 -
Foam sealing
from 1 € 13.09 incl. 19% VAT
€ 11.00 -
Tail wheel axle distance washer kit
This kit includes a wide selection of spacer washers for tail wheel axle, measuring 16 x 2 mm with widths ranging from 1.5 to 6 mm. It is particularly useful if you plan to switch from a classic tailwheel to a mini version. Compatible with most gliders, except for the Arcus M, Ventus-3M, and Cirrus.from 1 € 121.43 incl. 19% VAT
€ 102.04 -
Tail wheel cover for single seater version sport
This cover is designed to fit the TOST Mini 150 wheel.
If your glider is currently equipped with a classic Schempp-Hirth tailwheel, you can upgrade to the more compact TOST Mini 150. To make this conversion, you'll need this cover, a TOST Mini wheel, and a set of washers. All required components are listed below.
from 1 € 316.67 incl. 19% VAT
€ 266.11 -
Elevator transition for all Discus-2, select Ventus-2, and the Ventus-3
This part can be adapted to fit the Discus-2a, Discus-2b, Discus-2c, Ventus-2ax, Ventus-2bx, the ventus-2c, the ventus-2cx and the Ventus-3.
It measures 148 mm in width.
Please note that you will need to cut the part to ensure it fits your glider, as it is sold in an untrimmed form.
from 1 € 172.92 incl. 19% VAT
€ 145.31 -
Brake pull cable for the front seat of the Arcus and Duo Discus xL with Magura-type disc brake
This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.
The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple. The black segmented cable housing is included.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
The EASA Form one is included.
from 1 € 49.50 incl. 19% VAT
€ 41.60 -
Kit for brake pull cable for single seater with drum brake
This comprehensive kit ensures compatibility with all single-seater gliders equipped with drum brakes and provides the necessary components for a smooth brake cable replacement.
The cable comes with a standard 5.5 mm nipple, which fits most modern gliders that have a 6.2 mm handle hole. For older models or those with larger handle holes, an additional nipple is included, suitable for handles with an 8.5 mm hole.
The kit includes:
- 1600 mm of 2 mm cable with a 5.5 x 10 mm nipple
- 1 x Nicopress oval sleeve (1.5-2 mm, NT281C-A)
- 1 x 2 mm thimble
- 1 x Nipple No. 33A
- 1 x Nipple support No. 21A (8 x 9 mm)
from 1 € 68.92 incl. 19% VAT
€ 57.92 -
Brake pull cable for single seaters with magura type disc
This system is used for the Ventus-2 and the Discus-2 which are using the 5" Cleveland wheel from TOST, with a “Magura” cylinder brake.
The brake cable measures 555 mm in length and features a 6 x 10 mm nipple.
from 1 € 13.96 incl. 19% VAT
€ 11.73 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69 -
from 1 € 17.26 incl. 19% VAT
€ 14.50 -
Wing nut for trim weights
This butterfly nut is M10 (DIN 315) and it is used to secure the cockpit weights in all Schempp-Hirth single seaters (except the Ventus-3), the Nimbus, the Janus and some of the first Duo Discus.from 1 € 1.78 incl. 19% VAT
€ 1.50 -
Fokker-safety pin for trim weights
This safety pin (or Fokker pin) is 1,5 mm and it is used to secure the cockpit weight in Schempp-Hirth gliders.from 1 € 1.34 incl. 19% VAT
€ 1.13
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.