Cockpit
-
Flap latch-in element for Ventus-2c, -2cx and -2bx
This part is used for the notching of the flaps of the Ventus-2bx, Ventus-2c and Ventus-2cx.
It is 146 mm long and the screw holes are spaced 50 and 69 mm apart respectively.
from 1 € 89.75 incl. 19% VAT
€ 75.42 -
Front canopy hinge for Arcus, Duo Discus xL and Nimbus-4DL
This hinge is for the canopy of all Arcus, Duo Discus xL and Nimbus-4DL.
This front hinge is printed in 3D and will break in case of evacuation. If it happens accidentally, it is possible to replace it. This hinge was previously in carbon fiber but you can replace it by that one with minor adjustments.
Note: the hinge at the back is different.
from 1 € 92.32 incl. 19% VAT
€ 77.58 -
Flap latch-in element for Ventus c
This part is used for the notching of the flaps of the Ventus c.
It is 135 mm long and the screw holes are spaced 50 and 68 mm apart respectively. The space between the first and the last step is 90 mm. Please look carefully at the drawing to make sure that it is really the part you need.
from 1 € 105.15 incl. 19% VAT
€ 88.36 -
Flap latch-in element for Ventus-2b
This part is used for the notching of the flaps of the Ventus-2b.
It is 135 mm long and the screw holes are spaced 50 and 69 mm apart respectively.
from 1 € 109.37 incl. 19% VAT
€ 91.91 -
Canopy locking mechanism for Duo Discus and Nimbus-4D
This kit is for the TN 380-1 and TN396-6.
According to your glider, you might need the optional guide or not.
Please read the TNs carefully.
from 1 € 126.14 incl. 19% VAT
€ 106.00from 1 € 332.95 incl. 19% VAT
€ 279.79 -
Bracket for battery box for double seaters
This bracket is designed for the battery holders installed on the rear side of the front pilot seat, close to the aft pilot’s leg area.
The full box is available in the suggested products section at the bottom of the page.
from 1 € 157.65 incl. 19% VAT
€ 132.48 -
Rear Headrest Racket
This support is used on a fuselage side, to fixe the rear headrest.
It is composed of the headrest holder, the locking plate, the 7.2mm bolt and the part that connect to the fuselage.
from 1 € 164.22 incl. 19% VAT
€ 138.00 -
Polyflex-hose for Ventus-2 and Discus-2 using the disc brakes type Magura (Option)
This system is used for the Ventus-2 and the Discus-2 which are using the 5" Cleveland wheel from TOST and with a “Magura” cylinder brake.
Polyflex-hose is 1004 CK and it is 1080mm.
from 1 € 186.57 incl. 19% VAT
€ 156.78 -
Oxygen-bottle neck-holder
This oxygen bottle support is suitable for a majority of Schempp-Hirth gliders.
Please choose the diameter of your oxygen bottle. If your bottle has a diameter that is not in the list, please contact Schempp-Hirth spare part.
Please note that for some bottle (like the "Montain High"), you will need an extender to shift the pressure gauge away from the bottle neck.
from 1 € 214.20 incl. 19% VAT
€ 180.00from 1 € 214.20 incl. 19% VAT
€ 180.00
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.