Controls
-
Water filler cap
This sealing cap is for the Ventus-2, Discus-2, Duo Discus and the first Arcus.
The cap diameter is 36 mm and it is 5 mm high with a M6 hole on the side (B40-1226). Older gliders can have the same cap but the system may be different.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 52.32 incl. 19% VAT
€ 43.97 -
Brake pull cable for the front seat of the Arcus and Duo Discus XL with Magura-type disc brake
This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.
The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
The EASA Form one is included.
from 1 € 49.61 incl. 19% VAT
€ 41.69 -
Brake pull cable for the front seat of the Arcus and Duo Discus xL with Magura-type disc brake
This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.
The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple. The black segmented cable housing is included.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
The EASA Form one is included.
from 1 € 49.50 incl. 19% VAT
€ 41.60 -
Spring for Janus, Nimbus-3D, -4D flap drive
This tension spring is used to hold the flap handle in the correct position.
It was originally used on the Janus C, Nimbus-3D, and Nimbus-4D, and is located on the rear cockpit wall (back seat).
However, some gliders have been modified and now use a flat spring (Ref. B40-0297) mounted near the spar bridge.
from 1 € 43.65 incl. 19% VAT
€ 36.68 -
Springs for wingtip aileron of the Duo Discus XL
This pair of springs is used for the outer wing panel aileron of the DuoDiscus XL. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 2 mm and it makes more than 2,5 coiled.
The springs used for the Duo Discus and the Ventus-2 is only 1,5 mm. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 39.29 incl. 19% VAT
€ 33.02 -
Landing gear retraction lever, quick release axle
This is part of the landing gear retraction system of all the single seater except for the Cirrus.
It is 189 mm long with a size 10 thread on one side and a 14 mm ring on the other.
This mechanism also requires a the main lever and a steel bushing which are sold separately. We are selling online, only the main lever used for the a majority of the single seater. For the other one, please contact us.
from 1 € 39.09 incl. 19% VAT
€ 32.85 -
Bellow V6-0714 for the elevator drive
This rubber boot surrounds the upper part of the elevator rope.
It is 70 mm long and 75 mm large and the diameters of the openings are 65 and 18 mm.
from 1 € 38.48 incl. 19% VAT
€ 32.34 -
Set of gaskets for main brake cylinder, Form 6, 7
This set of gasket can replace the on the main brake cylinder form 6 or 7. It is very likely that this type of cylinder is installed in the Duo Discus (but not in the x or xL), some Nimbus-4(D), as well as in some retrofitted Nimbus and Janus.
It do not work with the rectangular brake cylinder installed on some gliders (Ref: B40-1014).
from 1 € 37.83 incl. 19% VAT
€ 31.79 -
Polyflex brake hose for the Duo Discus
This Polyflex brake hose fits the classic Duo Discus equipped with master cylinder model 7 and 30-9 brakes.
The hose length is 600 mm.
Depending on your glider configuration, you may also require two adapters, which can be found under recommended products (references: L07-1346 and L07-0406).
from 1 € 36.26 incl. 19% VAT
€ 30.47
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.