Controls
-
Springs for wingtip aileron of the Duo Discus and the Ventus-2
This pair of springs is used for the outer wing panel aileron of the Duo Discus and Ventus-2. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 1,5 mm and it makes 1 full coiled.
On the Duo Discus xL, these springs are 2 mm and is making 2 full coiled. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 25.81 incl. 19% VAT
€ 21.69 -
Pneumatic tension spring for the Duo Discus x and xL airbrake
This 300N gas strut is located in the fuselage. It connects to the airbrake drive shaft in the Duo Discus x and xL.
If the airbrakes become very hard to operate, it may be that this gas strut needs to be replaced.from 1 € 27.06 incl. 19% VAT
€ 22.74 -
Outer water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 outer wing.
The plug used for the inner wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 27.75 incl. 19% VAT
€ 23.32 -
Aileron drive cover for Duo Discus
from 1 € 29.24 incl. 19% VAT
€ 24.57 -
Polyflex brake hose for the Duo Discus
This Polyflex brake hose fits the classic Duo Discus equipped with master cylinder model 7 and 30-9 brakes.
The hose length is 600 mm.
Depending on your glider configuration, you may also require two adapters, which can be found under recommended products (references: L07-1346 and L07-0406).
from 1 € 36.26 incl. 19% VAT
€ 30.47 -
Set of gaskets for main brake cylinder, Form 6, 7
This set of gasket can replace the on the main brake cylinder form 6 or 7. It is very likely that this type of cylinder is installed in the Duo Discus (but not in the x or xL), some Nimbus-4(D), as well as in some retrofitted Nimbus and Janus.
It do not work with the rectangular brake cylinder installed on some gliders (Ref: B40-1014).
from 1 € 37.83 incl. 19% VAT
€ 31.79 -
Bellow V6-0714 for the elevator drive
This rubber boot surrounds the upper part of the elevator rope.
It is 70 mm long and 75 mm large and the diameters of the openings are 65 and 18 mm.
from 1 € 38.48 incl. 19% VAT
€ 32.34 -
Landing gear retraction lever, quick release axle
This is part of the landing gear retraction system of all the single seater except for the Cirrus.
It is 189 mm long with a size 10 thread on one side and a 14 mm ring on the other.
This mechanism also requires a the main lever and a steel bushing which are sold separately. We are selling online, only the main lever used for the a majority of the single seater. For the other one, please contact us.
from 1 € 39.09 incl. 19% VAT
€ 32.85 -
Springs for wingtip aileron of the Duo Discus XL
This pair of springs is used for the outer wing panel aileron of the DuoDiscus XL. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 2 mm and it makes more than 2,5 coiled.
The springs used for the Duo Discus and the Ventus-2 is only 1,5 mm. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 39.29 incl. 19% VAT
€ 33.02
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.