Engine
-
New suspension for the powerplant spindle drive on Arcus M
Optional Spindle Drive Modification for Maintenance & Production according to TN A532-12
Our spindle drive system, responsible for extending and retracting the power plant, is designed with rubber-mounted suspension for optimal vibration isolation. This optional modification increases reliability.
Within the scope of maintenance and manufacture, it is also permissible to replace only the front, fuselage-side suspension (Action 1) or only the rubber mount of the rear, propeller arm-side suspension (Action 2).
- Kit 1: Front Suspension: Integrated within the fuselage
- Kit 2: Rear Suspension: Mounted on the propeller arm
from 1 € 188.29 incl. 19% VAT
€ 158.23from 1 € 336.00 incl. 19% VAT
€ 282.35from 1 € 242.15 incl. 19% VAT
€ 203.49from 1 € 578.15 incl. 19% VAT
€ 485.84 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69 -
Self sealing coupling for the Ventus-3M and Arcus M
This coupling is used for the fuel line going to the wing tank of the Ventus-3M and the Arcus M.
Please make sure you are entitled and have the skills to change that part. It should be secured with Loctite 577.
Please note: The coupling for the vent line is different.
from 1 € 85.17 incl. 19% VAT
€ 71.57 -
Plastic finger for propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
Its stopnut is included.
from 1 € 8.06 incl. 19% VAT
€ 6.77 -
Pneumatic spring 600 N for engine mount for Ventus-2T, -3T and Discus-2(c)T
This pneumatic spring is 718 mm long. It is used for the Discus-2T, Discus-2cT, Ventus-2cT, Ventus-2cxT, Ventus-3TP and Ventus-3TS.
Older gliders are using a 500N strut. Its reference is L03-0063 and you can find it on the suggested products bellow.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Cooler cap, 1,4 bar, for Solo 2625 type "i" from PVL
This lid is used for the cooler of all the Ventus-3M (Solo 2625-01i and 2625-01i neo) and all the Arcus M (Solo 2625-02i) after 2018 but not for the other version.
Please note that if the radiator of your glider is not black, you might need a different lid. Please contact Spare Parts.
from 1 € 37.56 incl. 19% VAT
€ 31.56 -
Fuel Tank for Ventus-2c(x)M for replacement
This item will allow you to replace the wing fuel tank of your Ventus-2cM and Ventus-2cxM.
from 1 € 1,690.17 incl. 19% VAT
€ 1,420.31 -
Fuel Tank for Arcus M for replacement
This item will allow you to replace the wing fuel tank of your Arcus.
from 1 € 1,864.50 incl. 19% VAT
€ 1,566.81 -
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.