Main landing Gear and Front Wheel
-
Landing gear pneumatic tension spring for Duo Discus X
This spring is 210N and it is used in the landing gear on the Duo Discus x.
This pneumatic spring is also used for the Arcus and the Duo Discus xL which have a Beringer wheel. For these planes, the spring is associated with a specific extension. You can find the full spare-part here.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 97.48 incl. 19% VAT
€ 81.92 -
Kit for brake pull cable for the Duo Discus front seat
This comprehensive kit ensures compatibility with all Duo Discus equipped with a master cylinder model 7 / brakes 30-9. It provides the necessary components for a smooth brake cable replacement.
The cable comes with a standard 5.5 mm nipple, which fits most modern gliders that have a 6.2 mm handle hole. For older models or those with larger handle holes, an additional nipple is included, suitable for handles with an 8.5 mm hole.
The kit includes:
- 4000 mm of 1,8 mm cable
- 1 x Nicopress oval sleeve (1.5-2 mm, NT281C-A)
- 1 x 2 mm thimble
- 1 x Nipple No. 33A
- 1 x Nipple support No. 21A (8 x 9 mm)
from 1 € 107.21 incl. 19% VAT
€ 90.09 -
Tyre 4.00-4 Tost AERO 8 pr
This tire (Tost p/n 064491) is used for the the 4" wheel of the single seater (before the Ventus-2c and the Discus-2b).
from 1 € 112.10 incl. 19% VAT
€ 94.20 -
Brake pad for Tost BZT2 (Post-2017 Models)
These brake linings (Tost P/N 080949) are designed for the BZT2 brake assembly installed after 2017 with a thread M10x1. It is not compatible with the model with a thread NPT See drawing.
The BZT2 system is compatible with 5″ and 6″ disc brake wheels from the Penta and Classic series. It is commonly installed on the Ventus-3 and Arcus edition 2020 models.
Please note that different braking systems have been used over time, and several Technical Notices (TN) have been approved. Carefully inspect your brakes before ordering to ensure you select the correct brake pad.
from 1 € 116.86 incl. 19% VAT
€ 98.20 -
Tube 5.00-5 (and 6.00), TR87
This tube fits 5.00 and 6.00 tyres.
Its short valve is adapted for almost all single seater with a 5" wheel (except the one equipped with TOST drum brakes like the Kobold 5"). It is also used for the double seaters equipped with a TOST Penta wheel.
You can find the tube 5.00-5, TR67, with a long valve, in the suggested products.
from 1 € 159.34 incl. 19% VAT
€ 133.90 -
Landing gear pneumatic tension spring for Duo Discus XL and Arcus with Beringer wheel
This gas strut is 210N and it is used in the landing gear on the Arcus and Duo Discus xL.
This model is made for Beringer wheels. If you have a TOST wheel, we advise you to use this model.
You can order the pneumatic spring alone, without the pivot ball nor the extension here.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 178.73 incl. 19% VAT
€ 150.19 -
Tyre 2.80/2.50-4 for double seater nose wheel
This 2.80/2.50-4 tire is used for the front wheel of the Janus, Duo Discus, and Arcus.
Previously, a 3" tire (D 3.00-4 IND IC35 4PR) was used, but that model has been discontinued. This tire serves as a suitable replacement.
from 1 € 190.40 incl. 19% VAT
€ 160.00 -
Landing gear pneumatic tension spring for Duo Discus XL und Arcus with a TOST wheel
This gaz strut is 210N and it is used for the landing gear on the Arcus and Duo Discus XL.
Important: It is not adapted for Beringer wheels.
Two models exist. The pivot ball was first associated with a M5 screw, before beeing replace by a M6 screw in 2015. Please measure the diameter of the screw on the part that you are currently using, and order the same.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 189.33 incl. 19% VAT
€ 159.10 -
Landing gear retraction lever
This is part, with the fork, of the landing gear retraction system of the Discus, Discus-2, Ventus and Ventus-2 (except for the Ventus-2cxa and for all the fuselages "a"). It is also used for the Nimbus-2, -3 and -4 single seater and for the mini-Nimbus.
This mechanism also requires a steel bushing and an axle which are sold separately.
from 1 € 236.57 incl. 19% VAT
€ 198.80
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.