Hardware
-
Wedekind safety device KIT
Kit to secure l'hotellier connector for gliders with manual control hookups.
It cannot be used for the wing extension.
It is sold by the unit and the EASA Form 1 is included.
from 1 € 95.66 incl. 19% VAT
€ 80.39 -
Safety springs for L'Hotellier
Pair of safety springs to secure l'hotellier connectors for gliders with manual control hookups.
The EASA Form 1 is included when needed.
from 1 € 11.90 incl. 19% VAT
€ 10.00 -
Safety ring-spring steel, DIN471, size 12
This safety ring-spring steel, DIN471, size 12 is used to secure the tailwheel axle of, almost, all Schempp-Hirth gliders.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Screw for the seat pan
This oval countersunk head screw is used for the seat pan.
It is size M 5 x 16.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Safety ring-spring steel, DIN471, size 8
This safety ring-spring steel, DIN471, size 8 is used to secure the Lindner wingtip wheel axle.from 1 € 0.55 incl. 19% VAT
€ 0.46 -
Self lock nut M6-8 and M8-8
Safety nut, DIN 985 galvanized
Availabe in thread size M6 or M8.
from 1 € 0.24 incl. 19% VAT
€ 0.20from 1 € 2.38 incl. 19% VAT
€ 2.00from 1 € 0.24 incl. 19% VAT
€ 0.20from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Roll pin for aileron
These roll pins are used to secure the aileron.
Dimension: 2 x 10 mm
DIN 1481 / ISO 8752
from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Washer M06 galvanized, DIN 125 / ISO 7090 Form B
Washer M06 galvanized, DIN 125 / ISO 7090 Form Bfrom 1 € 0.24 incl. 19% VAT
€ 0.20 -
Roll pin for trim
Roll pin DIN 1481 / ISO 8752 stainless.
They are (mainly) used to in trim of the Arcus, Duo Discus XL and Nimbus-4DL.
There is two models : On gliders produced after April 2015, you will probably need the 2 x 16 mm model. For the older glider you will need to use the 2x14 mm roll pins. Please have a look in your glider to confirm which models you need.
from 1 € 0.36 incl. 19% VAT
€ 0.30
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.