Spare parts
-
![BWS-1040_Umlenkrollenset[1].jpg](/uploads/tx_aimeos/1.d/preview/2/1/21947032_bws-1040_umlenkrollenset-1.webp?v=20240426143626)
BWS Pulley set
The deflection pulley is used to eliminate friction from the Bowden cables (in mosquito cleaner systems) in the event of major directional changes of the cable to enable lower manual force/power consumption and faster cleaning.from 1 € 90.44 incl. 19% VAT
€ 76.00 -
![BWS-1024_1025_Flexiputzer_links[1].jpg](/uploads/tx_aimeos/1.d/preview/6/e/6ef0e2f5_bws-1024_1025_flexiputzer_links-1.webp?v=20240426132755)
![BWS-1026_1027_Flexiputzer_rechts[1].jpg](/uploads/tx_aimeos/1.d/preview/0/9/0968bcbc_bws-1026_1027_flexiputzer_rechts-1.webp?v=20240426132755)
BWS Flexiwiper by Laminar Aerotec
From wing root to wing tip: The patented joint system adapts to the profile of the glider type during the cleaning process.
At a glance:
- A bug wiper for all types of glider.
- Aerodynamic shape.
- Streamlined, therefore minimum resistance.
- Fiber reinforced plastics with high strength.
- No buckling and no twisting of the components.
- UV-resistant.
- Double guided cleaning fialments: cleans efficiently and glides stably.
- Rests against the profile above and below the wings during the cleaning process.
- Fast mounting.
The BWS Flexiwiper can be retrofitted to almost any glider. For all Schempp-Hirth gliders, the retrival line is routed below the wing. Only this option is available in this shop. Before ordering for another type of glider, you have to consider whether the retrieval line is routed above or below the wing.
The package includes:
- 1 left and 1 right bug wiper inclusive fialments.
- 2 x tilt bracket to fit the fuselage.
- Installation manual.
You can find spare parts and related item below.
from 1 € 354.62 incl. 19% VAT
€ 298.00 -
Fuel Tank for Arcus M for replacement
This item will allow you to replace the wing fuel tank of your Arcus.
from 1 € 1,864.50 incl. 19% VAT
€ 1,566.81 -
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Red LED for fire warning 10 mm
This LED is blinking in RED. It has been use for gliders with Motor and FES.
A few old FES might have had an 8mm LED, it is not available anymore. You will also need to change the support to the new one (Ref: E11-014). Please contact the spare part team using the online Form.
from 1 € 3.71 incl. 19% VAT
€ 3.12 -
Main wheel for Ventus-3
This item is composed of the rim, the tire and the inner tube. It is adapted for the Ventus-3.from 1 € 1,674.53 incl. 19% VAT
€ 1,407.17 -
Flat spring for Janus, Nimbus-2, -3D, -4D flap drive
This tension spring is used to maintain the flap handle on the right position.
On the Janus B and Nimbus-2, it is located near the front seat handle.
Originally, the Janus C, the Nimbus-3D and the Nimbus-4D are using another spring that looks very different (ref B40-2417) and that is located on the back seat cockpit wall. However some gliders have been modified and they are now using this flat spring but near the spar bridge.
The other reference is available below under the suggested products.
from 1 € 18.64 incl. 19% VAT
€ 15.66 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.