Spare parts
-
Flap handle for some Ventus-2c and the Ventus-3
from 1 € 10.04 incl. 19% VAT
€ 8.44 -
Control cable B 3.2 mm
Control cable B, 3.2 mm, ISO 2020 (1/8”), DIN 3051 compliant, 7x19 construction.
Sold by the meter.
This cable is commonly used for rudder control. Please refer to your maintenance manual to confirm the correct cable type and connection method.
It is also used for the pylon arresting wires on the Nimbus-4M, Nimbus-4DM, Ventus-2cM, and Arcus M.
For this application, we recommend purchasing the "Kit pylon arresting wire for V2cM, N4M, N4DM and AM".from 1 € 10.02 incl. 19% VAT
€ 8.42 -
Water filler cap top
This plug is 5 mm high and its diameter is 36 mm. It fit all the Ventus 2, Discus 2, Nimbus 3, Duo Discus and the first Arcus.
Dependant on the glider, older Ventus and Discus can need this model or a 35 mm diameter sealing cap that is 7,5 mm high. Please look at your current model to order the same. If you need the thick sealing cap, you can order it through Schempp-Hirth spare-part form.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 9.64 incl. 19% VAT
€ 8.10 -
Rubber buffer 20x25, M6x18 for the radiator of the Ventus-2cM and Nimbus-4DM.
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM and Arcus M engine.
The head is 25 mm and the screw 18 mm. Its diameter is 20 mm.
Look at the model(s) that you want to replace and order the same. According to your glider, you might also want this rubber buffer.
from 1 € 9.21 incl. 19% VAT
€ 7.74 -
Steel bushing for rudder cable
This steel bushing, 8x1x7 mm without hole, is used for rudder cables.
They are sold individually.
The screw (05018 LN 9037, Ref L01-0005), washer (M05 DIN 125, Ref L01-0228) and lock nut (M 5-8, DIN 985 vz, Ref L01-0703) are provided.
The EASA form one is included.
from 1 € 8.45 incl. 19% VAT
€ 7.10 -
Cooling water gasket for the cylinder head of SOLO 2625
This sealing is used for the cooling system on the cylinder head of all SOLO 2625 engines.
It is 51 x 32 x 1,5 mm.
Older 2625 engines need another type of filter. If the filter you want to replace doesn't look like that one and is not in metal, contact Schempp-Hirth spare-part service.
from 1 € 8.37 incl. 19% VAT
€ 7.03 -
Brass Bushing for Standard Cirrus elevator support
This brass bushing (13x1.5x6.5 mm) is used on the front elevator mount of the Standard Cirrus.
from 1 € 8.26 incl. 19% VAT
€ 6.94 -
Water filler cap sealing for Ventus-3
This sealing is made for the Ventus-3 sealing caps.
Its diameter is 26 mm and the sealing is 4,0mm thick.
from 1 € 8.19 incl. 19% VAT
€ 6.88 -
Filter WK 21 for pitot
This WK 21 filter is used for the pitot tube in the glider’s nose.from 1 € 8.19 incl. 19% VAT
€ 6.88
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.