Spare parts
-
Inner and middle water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 inner wing.
The plug used for the outer wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 22.24 incl. 19% VAT
€ 18.69 -
Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.
This silent block is used for the cooler of the Arcus M, Ventus-3 and Quintus engine.
The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.
from 1 € 3.06 incl. 19% VAT
€ 2.57 -
Rubber buffer 20x25, M6x18 for the radiator of the Ventus-2cM and Nimbus-4DM.
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM and Arcus M engine.
The head is 25 mm and the screw 18 mm. Its diameter is 20 mm.
Look at the model(s) that you want to replace and order the same. According to your glider, you might also want this rubber buffer.
from 1 € 9.21 incl. 19% VAT
€ 7.74 -
Rubber buffer 25x10, M6x10 for the E-Box / radiator
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM, all Arcus M, all Ventus-3M and the Quintus.
The head is 10 mm and the screw 10 mm. Its head diameter is 24 mm. Look at the model(s) that you want to replace and order the same.
from 1 € 2.74 incl. 19% VAT
€ 2.30 -
Pneumatic tension spring 300 N for instr. panel of the Discus b, Discus-c, Ventus c, Ventus-2b
This 300 N gas strut is 313 mm long.
It is used for the foldable instr. panel of the Discus-2c FES, Discus b, Ventus c and Ventus-2b.
from 1 € 27.73 incl. 19% VAT
€ 23.30 -
![20200506_142704[1].jpg](/uploads/tx_aimeos/preview/1/d/1d34449b_preview_0_b_0b8c0c31722775c34c5c39c2989c4c2c_jpg.jpg?v=20211021145114)
Pneumatic tension spring 350 N for Ins. Panel of the Discus-2b,-2c and Ventus-2c
This 350 N gas strut is 293 mm long.
It is used for the foldable instrument panel of the Ventus-2c, Ventus-2bx, Discus-2a, Discus-2b and Discus-2c.
from 1 € 30.37 incl. 19% VAT
€ 25.52 -
![20200506_143644[1].jpg](/uploads/tx_aimeos/preview/a/9/a904b500_preview_7_2_723d233329ac79fc23d6f2cfc6a05874_jpg.jpg?v=20211021145126)
Pneumatic tension spring 450 N for Ins. Panel for the Duo Discus xL and the Arcus
This gas strut is 450 N and 178 mm long.
It is used for the foldable instrument panel of Arcus and Duo Discus XL.
from 1 € 23.73 incl. 19% VAT
€ 19.94 -
Hexagon Screw 06036, LN 9037
This 6k-screw is used for the elevator drive U-bracket.
from 1 € 1.71 incl. 19% VAT
€ 1.44 -
Hexagon Screw M06x18 - 8.8, DIN 933 / ISO 4017
This 6k-Screw is used for the elevator drive U-bracket.from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Safety ring-spring steel, DIN471, size 8
This safety ring-spring steel, DIN471, size 8 is used to secure the Lindner wingtip wheel axle.from 1 € 0.55 incl. 19% VAT
€ 0.46 -
Front canopy hinge for Arcus, Duo Discus xL and Nimbus-4DL
This hinge is for the canopy of all Arcus, Duo Discus xL and Nimbus-4DL.
This front hinge is printed in 3D and will break in case of evacuation. If it happens accidentally, it is possible to replace it. This hinge was previously in carbon fiber but you can replace it by that one with minor adjustments.
Note: the hinge at the back is different.
from 1 € 92.32 incl. 19% VAT
€ 77.58 -
Self lock nut M6-8 and M8-8
Safety nut, DIN 985 galvanized
Availabe in thread size M6 or M8.
from 1 € 0.24 incl. 19% VAT
€ 0.20from 1 € 2.38 incl. 19% VAT
€ 2.00from 1 € 0.24 incl. 19% VAT
€ 0.20from 1 € 0.24 incl. 19% VAT
€ 0.20 -
O-Ring Ø68 x Ø07,00mm NBR 70 for the propeller of the single seater with turbo Solo 2350
from 1 € 4.08 incl. 19% VAT
€ 3.43 -
pneumatic spring 500N for engine mount.
This gas strut is 500N and it is used for the engine mount of the Ventus T, Discus T, Ventus cM, the Nimbus-3T and the Nimbus-4T.
More modern single seaters are using the reference L03-0122, that is 600N. You can find it on the suggested product.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Roll pin for aileron
These roll pins are used to secure the aileron.
Dimension: 2 x 10 mm
DIN 1481 / ISO 8752
from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Cover for mounting slot of the outer wing, for Discus-2c and Ventus-3
This cover is 20 x 120 mm and it is made to cover the mounting slot of the outer wing panel of the Discus-2c and Ventus-3.
The model you need maybe different. For example, this item doesn't fit the Nimbus-4D. To order another cover type, please contact Schempp-Hirth Spare Part.
from 1 € 31.36 incl. 19% VAT
€ 26.35 -
Flap latch-in element for Ventus c
This part is used for the notching of the flaps of the Ventus c.
It is 135 mm long and the screw holes are spaced 50 and 68 mm apart respectively. The space between the first and the last step is 90 mm. Please look carefully at the drawing to make sure that it is really the part you need.
from 1 € 105.15 incl. 19% VAT
€ 88.36 -
Washer M06 galvanized, DIN 125 / ISO 7090 Form B
Washer M06 galvanized, DIN 125 / ISO 7090 Form Bfrom 1 € 0.24 incl. 19% VAT
€ 0.20 -
Spindle suspension with bushing
This rubber element is part of the spindelsuspension of the Ventus-2cM, Ventus-3M, Nimbus-4M, -4DM and Arcus M.
It is 34 mm long.
Depending on the equipment available to you, it might be easier to buy the complete part (B40-13772). See suggested products.
from 1 € 42.84 incl. 19% VAT
€ 36.00 -
Perspex disc 53,5 mm with 5 mm hole
This perspex disc is made for the Ventus-2a.
Its diameter is 53,5 mm and the central hole is 5 mm.
from 1 € 16.79 incl. 19% VAT
€ 14.11 -
Ignition wire for Arcus M
This ignition cable is 35 cm long and it is used for the Arcus M.
You will need 4 units. if you want to change all of them.
from 1 € 70.25 incl. 19% VAT
€ 59.03
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.