-
Screw for the rear spindle suspension of almost all the M
This screw is M10 x 58.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 26.18 incl. 19% VAT
€ 22.00 -
Rubber element of the spindle suspension for almost all M
This part is used for the Discus bM, the Ventus-2cM, the Ventus-3M, the Nimbus-4DM and the Arcus M.from 1 € 177.57 incl. 19% VAT
€ 149.22 -
Kit for the FES improved shunt screw connection (TN)
This kit contains:- 2 screws 3/8"- Length: 5/8"
- 2 lock washers
It is used to fulfil the TN 627-8, TN 863-26 and TN 825-59. Please read the TN carefully.from 1 € 7.14 incl. 19% VAT
€ 6.00 -
Decompression retraction sheet, for SOLO 2350 old version
This part is 148 x 20 x 2 mm.
It is used for the old Nimbus-4T and single seater designed before 2000: The Discus-2T (SN<41), the Discus-2cT (SN<36) and the Ventus-2cT (SN<185).
Some of these gliders might have been modified. The new retraction sheet looks different, so look carefully at the picture to order the same that you have on your glider.
You can find the newer one here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 15.98 incl. 19% VAT
€ 13.43 -
Copper mesh wire tube
This braided hose is KAG 3,11 QMM VSN 36 x 11 x 0,10.
It is used with the transparent hose NW 4,8x1,6 (T20-0064485) for the fuel sytem of almost all Turbo, the Ventus-2cM and the Nimbus-4DM.
It is sold by the meter.
Be aware that for Turbo gliders another mesh wire tube KAG 1,32 QMM 24x7x0,1 (ref: L07-0319) is used at the level of the T-connection.
from 1 € 10.25 incl. 19% VAT
€ 8.61 -
Pneumatic spring 1000 N for engine mount for all Arcus T and Duo Discus T
This pneumatic spring is 820 mm long. It is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 46.84 incl. 19% VAT
€ 39.36 -
Rubber element for the almost all modern engine mounts
This rubber element is use for the engine mount of the Arcus M, the Ventus-3M, Ventus-2cM, the Ventus-2cxM, the Nimbus-4M and the Nimbus-4DM.
Its old reference is VW 431407181D.
from 1 € 142.13 incl. 19% VAT
€ 119.44 -
Winglets Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Winglets Arcus “20”. We offer this pair in raw conditions, ready to be laminated for installation on your wingtip.This work requires professional installation and paint finish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern : service(at)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and the SN number of your Arcus. You can enter it below.
from 1 € 4,641.00 incl. 19% VAT
€ 3,900.00 -
Horizontal tailplane Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Horizontal Tailplane Arcus "20" we offer finished in PU paint.Installation requires modification of the vertical to horizontal tailplane junction area.This work requires professional lamination and adjustment before refinish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern: service(a)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and serial number of your Arcus. You can enter it below.
from 1 € 10,762.50 incl. 19% VAT
€ 9,044.12
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.