-
Coolant temperature sensor for Solo 2625 01i and 02i
This sensor is used in the Solo 2625 01i and 2625 02i engines to measure water temperature.
Please note that the sensor used in the older Solo 2625 model is different. You can find it under the suggested products.from 1 € 77.43 incl. 19% VAT
€ 65.07 -
Trim weight 3,7 kg, for Arcus, Duo Discus and Janus
This Trim weight is 3,7 kg and it is used for the Arcus, Duo Discus and Janus.from 1 € 78.72 incl. 19% VAT
€ 66.15 -
Rear-view mirror
from 1 € 83.06 incl. 19% VAT
€ 69.80 -
Brake pads Beringer ZEA01
These pads are used for the Beringer brakes of the Ventus-2, Discus-2, Duo Discus XL and Arcus.
We advise you to replace the pads before the thickness of friction material reachs 1.5 mm. For more information, you can consult the maintenace manual from Beringer.
A package contains the two pads used for one wheel.
from 1 € 83.30 incl. 19% VAT
€ 70.00 -
Elevator-bell crank
This item is part of the horizontal tailplane actuation system of all modern Schempp-Hirth gliders.
Please note that the Cirrus is equipped with a slightly different model. If you are unsure which model you need, please contact Schempp-Hirth Spare Part.
from 1 € 83.73 incl. 19% VAT
€ 70.36 -
Wingtip wheel, Lindner System, for Arcus
This wingtip wheel is made for the Arcus. The diameter of the rim is 90 mm and it is associated with a Ø80 x Ø10 O-Ring.
It is sold by the unit.
from 1 € 84.87 incl. 19% VAT
€ 71.32 -
Self sealing coupling for the Ventus-3M and Arcus M
This coupling is used for the fuel line going to the wing tank of the Ventus-3M and the Arcus M.
Please make sure you are entitled and have the skills to change that part. It should be secured with Loctite 577.
Please note: The coupling for the vent line is different.
from 1 € 85.17 incl. 19% VAT
€ 71.57 -
Wingtip skid for all Duo Discus
This skid is 194 x 47 x 37 mm and is used for all Duo Discus.
Double face tape is already fixed on the skid to make it easy to instal.
from 1 € 86.81 incl. 19% VAT
€ 72.95 -
Landing gear door spring for Arcus and Duo Discus XL
from 1 € 87.85 incl. 19% VAT
€ 73.82 -
Wingtip wheel, Lindner System, for Duo Discus, Discus-2c, Ventus-2c and Ventus-3
This wingtip wheel is 84 x 84 x 11 mm rim with a 60 x 10 O-Ring NBR70 tyre. It made for the Lindner system wingtip wheels of the Duo Discus, Discus-2c and the Ventus.
It is sold by the unit.
from 1 € 88.94 incl. 19% VAT
€ 74.74 -
Flap latch-in element for Ventus-2c, -2cx and -2bx
This part is used for the notching of the flaps of the Ventus-2bx, Ventus-2c and Ventus-2cx.
It is 146 mm long and the screw holes are spaced 50 and 69 mm apart respectively.
from 1 € 89.75 incl. 19% VAT
€ 75.42 -
BWS Pulley set
The deflection pulley is used to eliminate friction from the Bowden cables (in mosquito cleaner systems) in the event of major directional changes of the cable to enable lower manual force/power consumption and faster cleaning.from 1 € 90.44 incl. 19% VAT
€ 76.00 -
Turbulator tape roll
The classic Schempp-Hirth zigzag tape.
It is 12 mm large, and the zigzag are spaced by 6 mm.
A roll contains 15 meters of tape.
from 1 € 92.11 incl. 19% VAT
€ 77.40 -
Front canopy hinge for Arcus, Duo Discus xL and Nimbus-4DL
This hinge is for the canopy of all Arcus, Duo Discus xL and Nimbus-4DL.
This front hinge is printed in 3D and will break in case of evacuation. If it happens accidentally, it is possible to replace it. This hinge was previously in carbon fiber but you can replace it by that one with minor adjustments.
Note: the hinge at the back is different.
from 1 € 92.32 incl. 19% VAT
€ 77.58 -
Wing attachment bolt for Ventus-2c and Discus-2c, back
The visible part of the peg is 70,5 mm long with a 14 mm diameter. The internal part is 35 mm long, with a 40 mm diameter.
It is used on the back part of the Discus-2c and Ventus-2c wing roots.
from 1 € 93.58 incl. 19% VAT
€ 78.64 -
Wedekind safety device KIT
Kit to secure l'hotellier connector for gliders with manual control hookups.
It cannot be used for the wing extension.
It is sold by the unit and the EASA Form 1 is included.
from 1 € 95.66 incl. 19% VAT
€ 80.39 -
Landing gear pneumatic tension spring for Duo Discus X
This spring is 210N and it is used in the landing gear on the Duo Discus x.
This pneumatic spring is also used for the Arcus and the Duo Discus xL which have a Beringer wheel. For these planes, the spring is associated with a specific extension. You can find the full spare-part here.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 97.48 incl. 19% VAT
€ 81.92 -
Horiz. Tailplane Pin, Kit.
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. The kit provides all the necessary parts to change 1 pin.
from 1 € 98.19 incl. 19% VAT
€ 82.51 -
Flap latch-in element for Ventus c
This part is used for the notching of the flaps of the Ventus c.
It is 135 mm long and the screw holes are spaced 50 and 68 mm apart respectively. The space between the first and the last step is 90 mm. Please look carefully at the drawing to make sure that it is really the part you need.
from 1 € 105.15 incl. 19% VAT
€ 88.36 -
Water filler cap for Arcus Edition 2020
This sealing lid is for the Arcus edition 2020.
It is equipped of a non-return valve.
from 1 € 106.60 incl. 19% VAT
€ 89.58 -
Kit for brake pull cable for the Duo Discus front seat
This comprehensive kit ensures compatibility with all Duo Discus equipped with a master cylinder model 7 / brakes 30-9. It provides the necessary components for a smooth brake cable replacement.
The cable comes with a standard 5.5 mm nipple, which fits most modern gliders that have a 6.2 mm handle hole. For older models or those with larger handle holes, an additional nipple is included, suitable for handles with an 8.5 mm hole.
The kit includes:
- 4000 mm of 1,8 mm cable
- 1 x Nicopress oval sleeve (1.5-2 mm, NT281C-A)
- 1 x 2 mm thimble
- 1 x Nipple No. 33A
- 1 x Nipple support No. 21A (8 x 9 mm)
from 1 € 107.21 incl. 19% VAT
€ 90.09
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.