-
Wingtip wheel, Lindner System, for Arcus
This wingtip wheel is made for the Arcus. The diameter of the rim is 90 mm and it is associated with a Ø80 x Ø10 O-Ring.
It is sold by the unit.
from 1 € 84.87 incl. 19% VAT
€ 71.32 -
Elevator-bell crank
This item is part of the horizontal tailplane actuation system of all modern Schempp-Hirth gliders.
Please note that the Cirrus is equipped with a slightly different model. If you are unsure which model you need, please contact Schempp-Hirth Spare Part.
from 1 € 83.73 incl. 19% VAT
€ 70.36 -
Brake pads Beringer ZEA01
These pads are used for the Beringer brakes of the Ventus-2, Discus-2, Duo Discus XL and Arcus.
We advise you to replace the pads before the thickness of friction material reachs 1.5 mm. For more information, you can consult the maintenace manual from Beringer.
A package contains the two pads used for one wheel.
from 1 € 83.30 incl. 19% VAT
€ 70.00 -
Rear-view mirror
from 1 € 83.06 incl. 19% VAT
€ 69.80 -
Trim weight 3,7 kg, for Arcus, Duo Discus and Janus
This Trim weight is 3,7 kg and it is used for the Arcus, Duo Discus and Janus.from 1 € 78.72 incl. 19% VAT
€ 66.15 -
Coolant temperature sensor for Solo 2625 01i and 02i
This sensor is used in the Solo 2625 01i and 2625 02i engines to measure water temperature.
Please note that the sensor used in the older Solo 2625 model is different. You can find it under the suggested products.from 1 € 77.43 incl. 19% VAT
€ 65.07 -
Brake pads for Cleveland caliper 30-9
These brake lining (Tost p/n 075865) are used on brake assembly 30-9.
It can be mounted to 4′′, 5′′ and 6′′ disk brake wheels of the series Penta, Tria and Classic and on the original Cleveland brakes- wheel system.
Different system has been used and several TN have been approved. Please look carefully to your brakes and order similar brake pad.
from 1 € 72.08 incl. 19% VAT
€ 60.57 -
Case for the main pin
Protective cover for the main pin made of Supra-Tex. Designed to store and protect the main pin from dirt and damage while the glider is not rigged.
from 1 € 71.73 incl. 19% VAT
€ 60.28 -
Horizontal tailplane mounting tool, with Ventus-3 extras.
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip and an extra tool for the ballast plugs.from 1 € 71.39 incl. 19% VAT
€ 59.99 -
Main wheel axle
This is the axle for the main landing gear of almost all Discus, Discus-2, Ventus-2 and Ventus-3.
It is 215 mm long, including a M12x1,5 head (4 mm long) and a M12 screw thread (12 mm long).
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with carbon fiber undercarriage need another axle . If you are not sure, measure the axle that is currently used or contact Schempp-Hirth spare part.
You may also want to buy the 8 mm M12x1,5 castle nut which is used to secured the axle (See suggested products).
from 1 € 70.50 incl. 19% VAT
€ 59.24 -
Ignition wire for Arcus M
This ignition cable is 35 cm long and it is used for the Arcus M.
You will need 4 units. if you want to change all of them.
from 1 € 70.25 incl. 19% VAT
€ 59.03 -
Kit for brake pull cable for single seater with drum brake
This comprehensive kit ensures compatibility with all single-seater gliders equipped with drum brakes and provides the necessary components for a smooth brake cable replacement.
The cable comes with a standard 5.5 mm nipple, which fits most modern gliders that have a 6.2 mm handle hole. For older models or those with larger handle holes, an additional nipple is included, suitable for handles with an 8.5 mm hole.
The kit includes:
- 1600 mm of 2 mm cable with a 5.5 x 10 mm nipple
- 1 x Nicopress oval sleeve (1.5-2 mm, NT281C-A)
- 1 x 2 mm thimble
- 1 x Nipple No. 33A
- 1 x Nipple support No. 21A (8 x 9 mm)
from 1 € 68.92 incl. 19% VAT
€ 57.92 -
Mylar convex 0,19 mm, 22, 25 and 30 mm, Roll
This Mylarband, also named Hostaphanband or Profilband, is pre-curved and used for control surface sealing.
It is available in 3 different widths: 22, 25 and 30 mm. They are often refered as "Profilband 22mm / 0.19 mm strongly vaulted (vorgewölbt)", "Profilband 25 mm / 0.19 mm gewölbt" and "Profilband 30mm / 0.19 mm stark vorgewölbt".
A roll contains 15 meters of tape.
Note, 3 other models exist: plain, asymmetric curved and asymetric curved scarfed. Please refer to your glider control sealing instructions for more information.
from 1 € 68.37 incl. 19% VAT
€ 57.45from 1 € 54.62 incl. 19% VAT
€ 45.90from 1 € 51.76 incl. 19% VAT
€ 43.50from 1 € 74.79 incl. 19% VAT
€ 62.85 -
Bearing bracket for elevator bell crank
This item is used to fix the elevator bell crank to the fuselage on almost all Schempp-Hirth gliders.
Screws and washers are provided.
from 1 € 68.01 incl. 19% VAT
€ 57.15 -
Elevator- front trim knob for Arcus, all Duo Discus and all Nimbus-4D
This is the handle for the trim of the Arcus, Duo Discus XL and Nimbus-4DL.
The roll pins are included.
Please note the pin roll can be bought separatly (see suggested product). If your glider is older than April 2015, you need to use the 2x14 mm roll pins instead of 2x16 mm.
from 1 € 62.25 incl. 19% VAT
€ 52.31 -
Wing attachment bolt for Discus and Ventus, front
The visible part of the pin is 38,5 mm long with a 14 mm diameter. The inner part is 35 mm long and has a diameter of 40 mm.
It is used on the wing roots front part of the Discus, Discus-2, Ventus, Ventus-2c and Ventus-3S.
Some slightly older gliders, such as the Discus b, use this part for both the front and the back. Others will have a longer pin at the back. You can find it in the suggested product list. Please check carefully which version your glider uses.
from 1 € 61.26 incl. 19% VAT
€ 51.48 -
Pilot stick handle, 19,3 mm
This pilot stick handle is made by Air Ergo Leki for the Schempp-Hirth 19,3 mm diameter control sticks.
3 adaptors are provided for the folowing settings: No SC, SC switch or SC button.
from 1 € 60.73 incl. 19% VAT
€ 51.03 -
Air filter for SOLO 2625-01 and 2625-02
This air filter RU 2690 (Solo ref: 25 00 580) is used for the Solo 2625-01 and 2625-02.
from 1 € 59.67 incl. 19% VAT
€ 50.14 -
Pilot stick bag for double seater front seat
This fabric bag is placed around the pilot stick of the front seat of the double seaters. This model is not adapted for the Arcus edition 2020.
It is a safety feature, preventing things going inside the controls. If it get old or damaged you can replace it.
It is sold without frame.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Flight manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
In order to make this manual specific to your glider, you will need to put together the revisions that are relevant for your glider. We are just sending you all the revisions on a PDF version.
Please use the delivery option “Pick Up at Schempp-Hirth” to avaoid to pay for shippment if you are ordering only the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Maintenance manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
To adapt this manual to your glider, you must assemble the revisions relevant to your specific glider. We are just sending you all revisions in a PDF version.
Please use the delivery option "Pick up at Schempp-Hirth" to avoid shipping fee if you only order the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Pilot stick bag for single seaters and double seater rear seat
This fabric bag is placed around the pilot stick of all single seater and at the rear seat of the double seaters. This model is not adapted for the Quintus, the Arcus edition 2020 and the Ventus-3. You can find the model for the front seat of the double seater in the suggested products.
It is a safety feature, preventing things going inside the controls. If it get old or damaged you can replace it.
It is sold without frame.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Kit for rudder pedal adjustment
This kit contains all you need to replace the pedal adjustment mechanism, including the instructions.
It is made for the Ventus b, Ventus c, Ventus-2, Discus, Discus-2, Nimbus-4, Duo Discus and the Arcus.
On the Nimbus-4, the Ventus, the Discus and the Duo Discus the mecanisme included a spring. It is now replace by a gummi band. With this kit, you can upgrade the old sytem to the newest one.
from 1 € 56.66 incl. 19% VAT
€ 47.61 -
Wing attachment bolt for double seaters, back
The visible part of the peg is 78,5 mm long and has a diameter of 18 mm. The inner part is 42 mm long and has a diameter of 40 mm.
It is used on the wing roots back part of the Nimbus-3D, the Nimbus-4D, the Duo Discus and the Arcus. It is not adapted for the Janus.
from 1 € 55.07 incl. 19% VAT
€ 46.28 -
Pressure gauge extension for MH oxygen bottles
This adapter is necessary for the MH Oxygen bottle.
Indeed the neck of these bottle is short and wide and, without the extension, the pressure gauge prevents the neck holder from being installed.
from 1 € 54.00 incl. 19% VAT
€ 45.38 -
Water filler cap
This sealing cap is for the Ventus-2, Discus-2, Duo Discus and the first Arcus.
The cap diameter is 36 mm and it is 5 mm high with a M6 hole on the side (B40-1226). Older gliders can have the same cap but the system may be different.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 52.32 incl. 19% VAT
€ 43.97 -
Tailwheel axle
This axle is adapted to the most used Schempp-Hirth tailwheels: the original 200x50 with or without led.
It does not fit the steerable tail wheel of the Arcus M and the Ventus-3M. For these gliders, you must use the reference B40-2946.
It is 98 mm long and 12 mm in diameter.
It is sold with the safety ring-spring (L01-0663).
A washer, that can be necessary on some gliders, is sold as an option.
from 1 € 51.56 incl. 19% VAT
€ 43.33 -
Wing attachment bolt for double seaters, front
The visible part of the pin is 48 mm long and has a diameter of 18 mm. The inner part is 42 mm long and has a diameter of 40 mm.
It is used on the wing roots front part of the double seaters as well as for the front and rear roots of the Janus.
from 1 € 50.28 incl. 19% VAT
€ 42.25 -
Canopy window rail
The canopy window rail device including screws. The screws are in metal but as an option, you can order it in plastic.
These rails are made for the Mecaplex canopy. It is the only model currently available, but you may need to customise it a little if you have a Weis canopy.
from 1 € 49.98 incl. 19% VAT
€ 42.00from 1 € 55.09 incl. 19% VAT
€ 46.29from 1 € 55.09 incl. 19% VAT
€ 46.29from 1 € 110.17 incl. 19% VAT
€ 92.58 -
Brake pull cable for the front seat of the Arcus and Duo Discus XL with Magura-type disc brake
This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.
The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
The EASA Form one is included.
from 1 € 49.61 incl. 19% VAT
€ 41.69 -
Brake pull cable for the front seat of the Arcus and Duo Discus xL with Magura-type disc brake
This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.
The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple. The black segmented cable housing is included.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
The EASA Form one is included.
from 1 € 49.50 incl. 19% VAT
€ 41.60 -
Shim washer kit for 18 mm wing bolt
These washers are used to adapt the distance of the wing to the fuselage. The kit contains eight 0,5 mm thick washers and four 0,8 mm thick washers.
They fit a 18 mm wing bolt. That includes the front and back bolts at the wing root of the double seaters.
These washers internal diameter is 17,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
from 1 € 48.27 incl. 19% VAT
€ 40.56 -
Pneumatic spring 1000 N for engine mount for all Arcus T and Duo Discus T
This pneumatic spring is 820 mm long. It is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 46.84 incl. 19% VAT
€ 39.36 -
Pneumatic tension spring 250 N for instr. panel
This 250 N gas strut is 222 mm long.
It is used for the foldable instrument panel of the Ventus-2a, Discus-2a and the Ventus-2cxa before the year 2009.
Some Ventus-2cxa before 2009 may have been modified. Please have a close look at the one installed in your glider. If the diameter is 20 mm and it is longer than 23 mm, you need the reference L03-0124. Please contact our spare part team.
from 1 € 46.15 incl. 19% VAT
€ 38.78 -
Wingtip skid for Discus-2
This skid is 164 x 48 x 36 mm is used for the Discus-2a, -2b and 2-c.
Double face tape is already fixed on the skid to instal it easily.
from 1 € 44.13 incl. 19% VAT
€ 37.08 -
Spring for Janus, Nimbus-3D, -4D flap drive
This tension spring is used to hold the flap handle in the correct position.
It was originally used on the Janus C, Nimbus-3D, and Nimbus-4D, and is located on the rear cockpit wall (back seat).
However, some gliders have been modified and now use a flat spring (Ref. B40-0297) mounted near the spar bridge.
from 1 € 43.65 incl. 19% VAT
€ 36.68 -
Fuel filters for Arcus M
These filters (1 filter Pierburg 4.00030.80.0 and 1 filter KL14 Mahle) are used for the fuel system of the Arcus M.from 1 € 43.21 incl. 19% VAT
€ 36.31 -
Spindle suspension with bushing
This rubber element is part of the spindelsuspension of the Ventus-2cM, Ventus-3M, Nimbus-4M, -4DM and Arcus M.
It is 34 mm long.
Depending on the equipment available to you, it might be easier to buy the complete part (B40-13772). See suggested products.
from 1 € 42.84 incl. 19% VAT
€ 36.00 -
Wingtip skid for Discus, Ventus and Ventus-2
This skid is 121 x 35 x 28,5 mm and is used for Discus a, Discus b, Ventus b, Ventus c and all the Ventus-2.
Double face tape is already fixed on the skid to instal it easily.
from 1 € 42.03 incl. 19% VAT
€ 35.32 -
pneumatic spring 500N for engine mount.
This gas strut is 500N and it is used for the engine mount of the Ventus T, Discus T, Ventus cM, the Nimbus-3T and the Nimbus-4T.
More modern single seaters are using the reference L03-0122, that is 600N. You can find it on the suggested product.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Pneumatic spring 600 N for engine mount for Ventus-2T, -3T and Discus-2(c)T
This pneumatic spring is 718 mm long. It is used for the Discus-2T, Discus-2cT, Ventus-2cT, Ventus-2cxT, Ventus-3TP and Ventus-3TS.
Older gliders are using a 500N strut. Its reference is L03-0063 and you can find it on the suggested products bellow.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Exhaust side guide plate for Arcus and Duo Discus Turbo
This plate is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 40.57 incl. 19% VAT
€ 34.09 -
Landing gear door hinge for Arcus, Duo Discus and Nimbus-4
These hinges are used to fix the landing gear door of the Arcus, Nimbus-4 and Duo Discus.
The countersunk screws (fuselage side) and countersunk-head rivet and their washers (door side) can be ordered as an option.
from 1 € 39.41 incl. 19% VAT
€ 33.12 -
Springs for wingtip aileron of the Duo Discus XL
This pair of springs is used for the outer wing panel aileron of the DuoDiscus XL. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 2 mm and it makes more than 2,5 coiled.
The springs used for the Duo Discus and the Ventus-2 is only 1,5 mm. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 39.29 incl. 19% VAT
€ 33.02 -
Landing gear retraction lever, quick release axle
This is part of the landing gear retraction system of all the single seater except for the Cirrus.
It is 189 mm long with a size 10 thread on one side and a 14 mm ring on the other.
This mechanism also requires a the main lever and a steel bushing which are sold separately. We are selling online, only the main lever used for the a majority of the single seater. For the other one, please contact us.
from 1 € 39.09 incl. 19% VAT
€ 32.85 -
Decompression retraction sheet, for SOLO 2350
This part is 148 x 20 x 20 mm.
It is used for all Duo Discus T and Arcus T. It is also used in association with the turbo pylon of the single seater designed in 2000. The Discus-2T (SN>40), the Discus-2cT (SN>35) and the Ventus-2cT (SN>184) have been produced with the new pylon and this decompression retraction sheet while older models might have been modified. The latest Nimbus-4DT are also usin this part. The older retraction sheet looks different, so look carefully at the picture. You can find the older model here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 39.03 incl. 19% VAT
€ 32.80 -
Bellow V6-0714 for the elevator drive
This rubber boot surrounds the upper part of the elevator rope.
It is 70 mm long and 75 mm large and the diameters of the openings are 65 and 18 mm.
from 1 € 38.48 incl. 19% VAT
€ 32.34 -
Temperature gauge
The temperature-indicator TF-00-059 is compact and readable. It temperatur captor can easily reach the front ventilation with its 125 cm cable.
This thermometer is mandatory for all the Schempp-Hirth gliders with water ballast.
from 1 € 37.90 incl. 19% VAT
€ 31.85 -
Set of gaskets for main brake cylinder, Form 6, 7
This set of gasket can replace the on the main brake cylinder form 6 or 7. It is very likely that this type of cylinder is installed in the Duo Discus (but not in the x or xL), some Nimbus-4(D), as well as in some retrofitted Nimbus and Janus.
It do not work with the rectangular brake cylinder installed on some gliders (Ref: B40-1014).
from 1 € 37.83 incl. 19% VAT
€ 31.79 -
Cooler cap, 1,4 bar, for Solo 2625 type "i" from PVL
This lid is used for the cooler of all the Ventus-3M (Solo 2625-01i and 2625-01i neo) and all the Arcus M (Solo 2625-02i) after 2018 but not for the other version.
Please note that if the radiator of your glider is not black, you might need a different lid. Please contact Spare Parts.
from 1 € 37.56 incl. 19% VAT
€ 31.56 -
Tailwheel tyre 200x50
This 6PR tire from TOST AERO is used for all the 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 37.37 incl. 19% VAT
€ 31.40
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.