-
Polyflex brake hose for the Duo Discus
This Polyflex brake hose fits the classic Duo Discus equipped with master cylinder model 7 and 30-9 brakes.
The hose length is 600 mm.
Depending on your glider configuration, you may also require two adapters, which can be found under recommended products (references: L07-1346 and L07-0406).
from 1 € 36.26 incl. 19% VAT
€ 30.47 -
Turbulator tape 0,8x5 for almost all gliders (Roll)
This turbulator band (or Noppenband) is 10 mm large and self-adhesive . The dimples are 0,8 mm high and they are distanced by 5 mm.
It is very often used on Schempp-Hirth glider but look at your sealing instructions as some gliders, like the Arcus and the Ventus 3, are using a different turbulator tapes.
The roll is 10 metres long.
from 1 € 35.99 incl. 19% VAT
€ 30.24 -
Hoodie Navy
The perfect hoodie for the airfield, soft and casual cut. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 80% cotton, 20% polyester (280 g/m²)
Color: Navy
Available in sizes S to XXLfrom 1 € 35.00 incl. 19% VAT
€ 29.41 -
Schempp-Hirth Hoodie Turquoise for women
The perfect hoodie for the airfield in a soft and casual cut. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 80% cotton, 20% polyester (280 g/m²)
Color: Turquoise
Available in sizes S to XXLfrom 1 € 35.00 incl. 19% VAT
€ 29.41 -
Bracket for battery box
This fiberglass bracket is designed for 7.5 Ah battery holders.
It has a width of 38 mm and fits a 97 mm battery. The shape is straight.
A similar model (F60-0651) features a bend and is used in several gliders, including the Duo Discus XL and the Arcus. Please check the model installed in your glider carefully before purchasing.
from 1 € 33.84 incl. 19% VAT
€ 28.44 -
Cockpit symbol for Arcus
This label is made for the Arcus (Arcus M SN<216 and Arcus T SN<90).
from 1 € 33.32 incl. 19% VAT
€ 28.00from 1 € 36.54 incl. 19% VAT
€ 30.71from 1 € 33.32 incl. 19% VAT
€ 28.00 -
Cockpit symbol
These pictograms can be used in Discus-2 and Duo Discus.from 1 € 33.32 incl. 19% VAT
€ 28.00 -
Back canopy hinge for Arcus, Duo Discus XL and Nimbus-4DL
This hinge is made of aluminium. It is different than the front hinge made of carbon fiber.
from 1 € 31.80 incl. 19% VAT
€ 26.72 -
Cover for mounting slot of the outer wing, for Discus-2c and Ventus-3
This cover is 20 x 120 mm and it is made to cover the mounting slot of the outer wing panel of the Discus-2c and Ventus-3.
The model you need maybe different. For example, this item doesn't fit the Nimbus-4D. To order another cover type, please contact Schempp-Hirth Spare Part.
from 1 € 31.36 incl. 19% VAT
€ 26.35 -
Retrieval line Dyneema BWS
This retrieval Line Dyneema is coated and talc-powdered.
The roll contain 25 m.
5 meter cleaning fialment are also provided !
from 1 € 30.94 incl. 19% VAT
€ 26.00 -
Pneumatic tension spring 350 N for Ins. Panel of the Discus-2b,-2c and Ventus-2c
This 350 N gas strut is 293 mm long.
It is used for the foldable instrument panel of the Ventus-2c, Ventus-2bx, Discus-2a, Discus-2b and Discus-2c.
from 1 € 30.37 incl. 19% VAT
€ 25.52 -
Aileron drive cover for Duo Discus
from 1 € 29.24 incl. 19% VAT
€ 24.57 -
Cockpit symbol for Discus-2c
This label is made for Discus-2cfrom 1 € 28.98 incl. 19% VAT
€ 24.35 -
Spherical bearing GL 14
This spherical bearing is adapted for 14mm diameter pin of the single seaters.
The internal diameter is 14 mm and the part is 25x25x8-11 mm.
from 1 € 28.56 incl. 19% VAT
€ 24.00 -
Spark plug connector 5k Ohm - V2
This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.
SOLO spare part n° 23 00 701 V1
This part was originally black, then changed to red, and has now been superseded by this new reference.
from 1 € 28.44 incl. 19% VAT
€ 23.90 -
Cockpit symbol for Ventus-3
This label is made for the Ventus-3.
from 1 € 28.24 incl. 19% VAT
€ 23.73 -
Canopy hinge for Discus, Discus-2, Ventus, Ventus-2, Ventus-3 Sport, Duo Discus, Duo Discus X and Nimbus-4D
This hinge is in carbon fiber.
Note: The rear hinge can be different. To order it, please contact Schempp-Hirth spare part.
from 1 € 27.95 incl. 19% VAT
€ 23.49 -
Outer water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 outer wing.
The plug used for the inner wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 27.75 incl. 19% VAT
€ 23.32 -
Pneumatic tension spring 300 N for instr. panel of the Discus b, Discus-c, Ventus c, Ventus-2b
This 300 N gas strut is 313 mm long.
It is used for the foldable instr. panel of the Discus-2c FES, Discus b, Ventus c and Ventus-2b.
from 1 € 27.73 incl. 19% VAT
€ 23.30 -
Bracket with brake pad for propeller brake lever for Ventus-2cM, -3M, and Arcus M
This propeller brake pad is designed for the propellers of the almost all the Ventus-2cM, Ventus-3M, and all Arcus M models.
Some Nimbus-4M and Nimbus-4DM gliders may also be equipped with this system if Technical Note 868-19 has been applied.
from 1 € 27.36 incl. 19% VAT
€ 22.99 -
Pneumatic tension spring for the Duo Discus x and xL airbrake
This 300N gas strut is located in the fuselage. It connects to the airbrake drive shaft in the Duo Discus x and xL.
If the airbrakes become very hard to operate, it may be that this gas strut needs to be replaced.from 1 € 27.06 incl. 19% VAT
€ 22.74 -
Shim washer kit for 14 mm wing bolt
These washers are used to adapt the distance of the wing to the fuselage. The kit contains eight 0,5 mm thick washers and four 0,8 mm thick washers.
They fit a 14 mm wing bolt. That includes the front and back bolts at the wing root of almost all the single seaters as well as the wing extention bolt of the Discus-2c, Ventus-2c and Ventus-3 and some winglet bolts.
These washers internal diameter is 13,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
from 1 € 26.99 incl. 19% VAT
€ 22.68 -
Screw for the rear spindle suspension of almost all the M
This screw is M10 x 58.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 26.18 incl. 19% VAT
€ 22.00 -
Exhaust gasket for Solo 2625
Gasket exhaust is used for the SOLO engines 2625.
It is 68,5 x 48 x 2 mm.
It is sold by the unit.
from 1 € 25.87 incl. 19% VAT
€ 21.74 -
Springs for wingtip aileron of the Duo Discus and the Ventus-2
This pair of springs is used for the outer wing panel aileron of the Duo Discus and Ventus-2. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 1,5 mm and it makes 1 full coiled.
On the Duo Discus xL, these springs are 2 mm and is making 2 full coiled. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 25.81 incl. 19% VAT
€ 21.69 -
Wing extension mounting tool
This tool allows you to assemble Discus-2c, Ventus-2c and Ventus-3 wing extensions.
from 1 € 25.38 incl. 19% VAT
€ 21.33 -
Schempp-Hirth Polo for men
A stylish navy polo shirt with a beautiful Ventus-3 drawing on the back. The quality and finish are really good with a fine piqué surface, the finely knitted cuffs and the supple knitted collar. It is also adapted to fly with a comfortables cut and no stitching on the back.
Material: 100% Cotton (195 g/m²)
Color: Navy
Fit: Regular Fit
Available from S to XXLfrom 1 € 25.00 incl. 19% VAT
€ 21.01 -
Schempp-Hirth Polo for women
High-quality polo shirt with elastic, ribbed cuffs and button placket. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 100% cotton (195 g/m²)
Color: Navy
Fit: Regular Fit
Available in sizes S to XXLfrom 1 € 25.00 incl. 19% VAT
€ 21.01 -
Polyflex-hose Type 2010N for Duo Discus xL Brakes (Magura system)
This hose is 2200 mm long.
It is used for the Duo Discus x und xL as well as the first Arcus which are using the 5" Classic wheels from TOST with a Magura cylinder brake.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
from 1 € 23.82 incl. 19% VAT
€ 20.02 -
Horizontal tailplane mounting tool with extra pin for wingtip mounting
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip.from 1 € 23.78 incl. 19% VAT
€ 19.98 -
Pneumatic tension spring 450 N for Ins. Panel for the Duo Discus xL and the Arcus
This gas strut is 450 N and 178 mm long.
It is used for the foldable instrument panel of Arcus and Duo Discus XL.
from 1 € 23.73 incl. 19% VAT
€ 19.94 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69 -
Teflon tape roll
The 30 mm large Teflon band is self adhesive.
A roll contains 10 meters of tape.
from 1 € 23.18 incl. 19% VAT
€ 19.48 -
Horizontal tailplane mounting tool
The Schempp-Hirth iconic tool!
from 1 € 23.11 incl. 19% VAT
€ 19.42 -
Tailwheel axle for Arcus M and Ventus-3M
This axle is design for the steering tail wheel of the Arcus-M and the Ventus-3M.
from 1 € 22.54 incl. 19% VAT
€ 18.94 -
Inner and middle water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 inner wing.
The plug used for the outer wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 22.24 incl. 19% VAT
€ 18.69 -
Bellow V6-269 for water ballast control rod
This rubber boot is surrounding the water ballast control rod to avoid the water leaking through. It is used in several Schempp-Hirth gliders including the Nimbus-2, Ventus, Ventus-2c, Discus-2c, Duo Discus and the Arcus.
It is 125 x 22 x 22 mm with a 7 mm and a 16 mm opening.
Over the years, other bellows and different combinations have been used. You can find them underneath this description, in the "suggested products", if you want to compare them with the model that you wish to replace.
from 1 € 21.74 incl. 19% VAT
€ 18.27 -
Landing gear retraction lever, steel bushing
This is part of the landing gear retraction system of all the single seater except for the Cirrus. It is also used for the Janus, Nimbus-3D, Nimbus-4D and the Duo Discus (except DDx and DDxL).
It is 108 mm long and its diameter is 12 mm.
This mechanism also requires a main lever and an axle which are sold separately. We are selling online only the main lever used for the amajoity of the single seater. For the other one, please contact us.
from 1 € 21.69 incl. 19% VAT
€ 18.23 -
Landing gear guide plate for Duo Discus and Nimbus-4D
This grey PVC plate is used as a guide for the Duo Discus and Nimbus-4D.
Dimensions: 220 × 25 mm.
Please note: the model used for the Duo Discus XL, Arcus, and Nimbus-4DL is longer (ref. B40-3306). You can find it in the suggested products below.
from 1 € 21.27 incl. 19% VAT
€ 17.87 -
Flap position symbol for the Arcus
This label is made for the original Arcus.
from 1 € 20.93 incl. 19% VAT
€ 17.59 -
Tesafix roll 9 and 12 mm
This double side tape (Tesafix 4965) is used for control surface sealing and is available in 2 different widths: 9 or 12 mm.
A roll contains 50 meters of tape.
from 1 € 20.15 incl. 19% VAT
€ 16.93from 1 € 20.74 incl. 19% VAT
€ 17.43from 1 € 28.02 incl. 19% VAT
€ 23.55 -
Bellow V6-0052 for waterballasts
This flexible rubber boot is 63 x 39x 39 mm with a 10 mm and a 25 mm opening.
It is surrounding the ballast rod on the wing root of the Discus b, Ventus-2 (SN < 561), Discus-2a and Discus-2b (SN< 234) which have been produced before June 2009. However, some of these gliders might have been retrofitted with the newer system. You can see on the suggested product the other bellow.
It is used for the ballast system of the Nimbus-3, -3D, -4 and -4D. For the Nimbus, the bellow may need to be adapted by cutting the larger end.
It is also used as a sealing around the brake line when crossing the wheel box in all single seaters.
from 1 € 20.15 incl. 19% VAT
€ 16.93 -
Schempp-Hirth T-shirt
High-quality T-shirt with a round neck in a classic shape. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 100% cotton.
Color: Navy
Fit: Regular Fit
Available in sizes XXS to XXLfrom 1 € 20.00 incl. 19% VAT
€ 16.81 -
fix-o-moll "V" profile sealing, for the vertical fin rudder sealing
A roll contains 10 m of sealing.from 1 € 19.88 incl. 19% VAT
€ 16.71 -
Fuel hose
This hose NW 4,8x1,6 mm is transparent and it is use for the Fuel sytem.
It is sold my the meter.
from 1 € 19.63 incl. 19% VAT
€ 16.50 -
Hose clamp for the water ballast in the wing
The clamp is suitable for hoses with diameters ranging from 12 mm to 18 mm and is used on some gliders for the water ballast system in the wing.from 1 € 19.40 incl. 19% VAT
€ 16.30 -
Tube 3.00/4.00-4 (260x85)
This tube is used for the the 3" front wheel of the double seaters and the single seater 4" main wheel.
Carefull, the valve is only 32 mm long.
from 1 € 19.39 incl. 19% VAT
€ 16.29 -
Cable roll with bearing 626 ZZ
This pulley with 626-ZZ bearing is used for the hook release mechanism and for some turbo actuation systems.from 1 € 19.23 incl. 19% VAT
€ 16.16 -
Flat spring for Janus, Nimbus-2, -3D, -4D flap drive
This tension spring is used to maintain the flap handle on the right position.
On the Janus B and Nimbus-2, it is located near the front seat handle.
Originally, the Janus C, the Nimbus-3D and the Nimbus-4D are using another spring that looks very different (ref B40-2417) and that is located on the back seat cockpit wall. However some gliders have been modified and they are now using this flat spring but near the spar bridge.
The other reference is available below under the suggested products.
from 1 € 18.64 incl. 19% VAT
€ 15.66 -
Green ball knob for trim
This handle for the trim is a format 25 mm, M6. It is made in aluminium and green powdered.
from 1 € 18.34 incl. 19% VAT
€ 15.41 -
Bellows V6-905 for the fin tank
This rubber boot ensures the sealing of the tail ballast of most of the Schempp-Hirth gliders.
It is advisable to replace it every 2-3 years to avoid water leaks.Its dimensions are 72 x 38 mm.
from 1 € 18.31 incl. 19% VAT
€ 15.39
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.