-
Pneumatic tension spring for mini Nimbus airbrakes
This 150N gas strut is used for the Mini-Nimbus airbreaks.
from 1 € 182.71 incl. 19% VAT
€ 153.54 -
Landing gear pneumatic tension spring for Duo Discus XL and Arcus with Beringer wheel
This gas strut is 210N and it is used in the landing gear on the Arcus and Duo Discus xL.
This model is made for Beringer wheels. If you have a TOST wheel, we advise you to use this model.
You can order the pneumatic spring alone, without the pivot ball nor the extension here.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 178.73 incl. 19% VAT
€ 150.19 -
Oxygen-bottle holder for pure gliders
Thees oxygen bottle holders are suitable for a majority of pure Schempp-Hirth gliders.
Please choose which holder you need according to the diameter of your Oxygen-bottle. It is possible to adjust the holder at +/- 2mm.
In single-seaters, one of the screws of the holder is often above the spar bridge, where the wall is relatively thin. It is therefore often necessary to add the washer B40-2218 (see suggested products).
from 1 € 177.63 incl. 19% VAT
€ 149.27 -
Rubber element of the spindle suspension for almost all M
This part is used for the Discus bM, the Ventus-2cM, the Ventus-3M, the Nimbus-4DM and the Arcus M.from 1 € 177.57 incl. 19% VAT
€ 149.22 -
Pneumatic tension spring connecting the flap to the airbrake
This 200N gas strut is in the airbrake box. It connects the airbrake rod to the actuating lever of the trailing edge flap for the Duo Discus X and xL as well as the Nimbus-3D, -4 and -4D.
An older version used a gas spring from the company Hahn, you can use this one instead.
from 1 € 175.92 incl. 19% VAT
€ 147.83 -
Elevator transition for all Discus-2, select Ventus-2, and the Ventus-3
This part can be adapted to fit the Discus-2a, Discus-2b, Discus-2c, Ventus-2ax, Ventus-2bx, the ventus-2c, the ventus-2cx and the Ventus-3.
It measures 148 mm in width.
Please note that you will need to cut the part to ensure it fits your glider, as it is sold in an untrimmed form.
from 1 € 172.92 incl. 19% VAT
€ 145.31 -
Elevator transition for Duo Discus, Arcus and Nimbus-4D
This part can be adapted to fit the Duo Discus, Duo Discus X, Duo Discus XL, as well as the Arcus, Arcus Edition 2020, and Nimbus-4D.
It measures approximately 147 mm in width and 157 mm in length.
Please note that the part is sold in an untrimmed form, so you will need to cut it to ensure a proper fit for your glider.
from 1 € 172.92 incl. 19% VAT
€ 145.31 -
Rear Headrest Racket
This support is used on a fuselage side, to fixe the rear headrest.
It is composed of the headrest holder, the locking plate, the 7.2mm bolt and the part that connect to the fuselage.
from 1 € 164.22 incl. 19% VAT
€ 138.00 -
Limit switch IX02 0815
This proximity switch (ref IX02 0815) is used for the automatic propeller brake in the Arcus M.
It is not addapted to the Arcus M edition 2020.
This position sensor is sold as a unit (you might need two of them) and the FUT plug is included.
from 1 € 163.33 incl. 19% VAT
€ 137.25 -
Fuel tube for double seater with turbo
This fuel tube is use for the Nimbus-4D T, the Duo Discus T, Duo Discus xL T and the Arcus T.from 1 € 162.95 incl. 19% VAT
€ 136.93 -
Tube 5.00-5 (and 6.00), TR87
This tube fits 5.00 and 6.00 tyres.
Its short valve is adapted for almost all single seater with a 5" wheel (except the one equipped with TOST drum brakes like the Kobold 5"). It is also used for the double seaters equipped with a TOST Penta wheel.
You can find the tube 5.00-5, TR67, with a long valve, in the suggested products.
from 1 € 159.34 incl. 19% VAT
€ 133.90 -
Bracket for battery box for double seaters
This bracket is designed for the battery holders installed on the rear side of the front pilot seat, close to the aft pilot’s leg area.
The full box is available in the suggested products section at the bottom of the page.
from 1 € 157.65 incl. 19% VAT
€ 132.48 -
Rotule L'Hotellier MS 961-150-150-L3
This l'Hotellier ball end is used for gliders with manual control hookups.
For some gliders, including the Cirrus, you need a washer and a locknut. They are included in the package.
The EASA Form 1 is included when needed.
from 1 € 156.34 incl. 19% VAT
€ 131.38 -
Coolant temperature sensor for Solo 2625 01 and 02
This sensor is used in the Solo 2625 01 and 2625 02 to measure the water temperature.
The sensor used on the Arcus M and Ventus-3M (Solo 2625 01i and 02i) is different. You can find it on the suggested products.
from 1 € 147.80 incl. 19% VAT
€ 124.20 -
Air filter for SOLO 2625-02i
This air filter RC-1060 (Solo ref: 25 00 845) is used for the 2625-02i.
It used to be rectangular but the shape changed. You can use this model instead of the square ones.
from 1 € 142.86 incl. 19% VAT
€ 120.05 -
Rubber element for the almost all modern engine mounts
This rubber element is use for the engine mount of the Arcus M, the Ventus-3M, Ventus-2cM, the Ventus-2cxM, the Nimbus-4M and the Nimbus-4DM.
Its old reference is VW 431407181D.
from 1 € 142.13 incl. 19% VAT
€ 119.44 -
Canopy locking mechanism for Duo Discus and Nimbus-4D
This kit is for the TN 380-1 and TN396-6.
According to your glider, you might need the optional guide or not.
Please read the TNs carefully.
from 1 € 126.14 incl. 19% VAT
€ 106.00from 1 € 332.95 incl. 19% VAT
€ 279.79 -
Tail wheel axle distance washer kit
This kit includes a wide selection of spacer washers for tail wheel axle, measuring 16 x 2 mm with widths ranging from 1.5 to 6 mm. It is particularly useful if you plan to switch from a classic tailwheel to a mini version. Compatible with most gliders, except for the Arcus M, Ventus-3M, and Cirrus.from 1 € 121.43 incl. 19% VAT
€ 102.04 -
Brake pad for Tost BZT2 (Post-2017 Models)
These brake linings (Tost P/N 080949) are designed for the BZT2 brake assembly installed after 2017 with a thread M10x1. It is not compatible with the model with a thread NPT See drawing.
The BZT2 system is compatible with 5″ and 6″ disc brake wheels from the Penta and Classic series. It is commonly installed on the Ventus-3 and Arcus edition 2020 models.
Please note that different braking systems have been used over time, and several Technical Notices (TN) have been approved. Carefully inspect your brakes before ordering to ensure you select the correct brake pad.
from 1 € 116.86 incl. 19% VAT
€ 98.20 -
Kit pylon arresting wire for Ventus- 2cM, Ventus-3M, Arcus M, Nimbus-4M and -4DM
The kit contains the cable (diameter 3,2 mm), 2 nicopress-oval sleeves, 2 thimbles and some silicone tube. One side is already assembled.
It can be use for the Ventus-2cM, Ventus-3M, the Nimbus-4M and -4DM and the Arcus M.
Please refer to the maintenance manual for the installation.
from 1 € 114.66 incl. 19% VAT
€ 96.35 -
Fuel filters for Ventus-3M
These filters (reference 6064-0A / 0 450 905 401 and E230204) are used for the fuel system of the Ventus-3M.from 1 € 114.49 incl. 19% VAT
€ 96.21
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.