-
Rear-view mirror
from 1 € 83.06 incl. 19% VAT
€ 69.80 -
Trim weight 3,7 kg, for Arcus, Duo Discus and Janus
This Trim weight is 3,7 kg and it is used for the Arcus, Duo Discus and Janus.from 1 € 78.72 incl. 19% VAT
€ 66.15 -
Coolant temperature sensor for Solo 2625 01i and 02i
This sensor is used in the Solo 2625 01i and 2625 02i engines to measure water temperature.
Please note that the sensor used in the older Solo 2625 model is different. You can find it under the suggested products.from 1 € 77.43 incl. 19% VAT
€ 65.07 -
Brake pads for Cleveland caliper 30-9
These brake lining (Tost p/n 075865) are used on brake assembly 30-9.
It can be mounted to 4′′, 5′′ and 6′′ disk brake wheels of the series Penta, Tria and Classic and on the original Cleveland brakes- wheel system.
Different system has been used and several TN have been approved. Please look carefully to your brakes and order similar brake pad.
from 1 € 72.08 incl. 19% VAT
€ 60.57 -
Case for the main pin
Protective cover for the main pin made of Supra-Tex. Designed to store and protect the main pin from dirt and damage while the glider is not rigged.
from 1 € 71.73 incl. 19% VAT
€ 60.28 -
Horizontal tailplane mounting tool, with Ventus-3 extras.
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip and an extra tool for the ballast plugs.from 1 € 71.39 incl. 19% VAT
€ 59.99 -
Main wheel axle
This is the axle for the main landing gear of almost all Discus, Discus-2, Ventus-2 and Ventus-3.
It is 215 mm long, including a M12x1,5 head (4 mm long) and a M12 screw thread (12 mm long).
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with carbon fiber undercarriage need another axle . If you are not sure, measure the axle that is currently used or contact Schempp-Hirth spare part.
You may also want to buy the 8 mm M12x1,5 castle nut which is used to secured the axle (See suggested products).
from 1 € 70.50 incl. 19% VAT
€ 59.24 -
Ignition wire for Arcus M
This ignition cable is 35 cm long and it is used for the Arcus M.
You will need 4 units. if you want to change all of them.
from 1 € 70.25 incl. 19% VAT
€ 59.03 -
Kit for brake pull cable for single seater with drum brake
This comprehensive kit ensures compatibility with all single-seater gliders equipped with drum brakes and provides the necessary components for a smooth brake cable replacement.
The cable comes with a standard 5.5 mm nipple, which fits most modern gliders that have a 6.2 mm handle hole. For older models or those with larger handle holes, an additional nipple is included, suitable for handles with an 8.5 mm hole.
The kit includes:
- 1600 mm of 2 mm cable with a 5.5 x 10 mm nipple
- 1 x Nicopress oval sleeve (1.5-2 mm, NT281C-A)
- 1 x 2 mm thimble
- 1 x Nipple No. 33A
- 1 x Nipple support No. 21A (8 x 9 mm)
from 1 € 68.92 incl. 19% VAT
€ 57.92 -
Mylar convex 0,19 mm, 22, 25 and 30 mm, Roll
This Mylarband, also named Hostaphanband or Profilband, is pre-curved and used for control surface sealing.
It is available in 3 different widths: 22, 25 and 30 mm. They are often refered as "Profilband 22mm / 0.19 mm strongly vaulted (vorgewölbt)", "Profilband 25 mm / 0.19 mm gewölbt" and "Profilband 30mm / 0.19 mm stark vorgewölbt".
A roll contains 15 meters of tape.
Note, 3 other models exist: plain, asymmetric curved and asymetric curved scarfed. Please refer to your glider control sealing instructions for more information.
from 1 € 68.37 incl. 19% VAT
€ 57.45from 1 € 54.62 incl. 19% VAT
€ 45.90from 1 € 51.76 incl. 19% VAT
€ 43.50from 1 € 74.79 incl. 19% VAT
€ 62.85 -
Bearing bracket for elevator bell crank
This item is used to fix the elevator bell crank to the fuselage on almost all Schempp-Hirth gliders.
Screws and washers are provided.
from 1 € 68.01 incl. 19% VAT
€ 57.15 -
Elevator- front trim knob for Arcus, all Duo Discus and all Nimbus-4D
This is the handle for the trim of the Arcus, Duo Discus XL and Nimbus-4DL.
The roll pins are included.
Please note the pin roll can be bought separatly (see suggested product). If your glider is older than April 2015, you need to use the 2x14 mm roll pins instead of 2x16 mm.
from 1 € 62.25 incl. 19% VAT
€ 52.31 -
Wing attachment bolt for Discus and Ventus, front
The visible part of the pin is 38,5 mm long with a 14 mm diameter. The inner part is 35 mm long and has a diameter of 40 mm.
It is used on the wing roots front part of the Discus, Discus-2, Ventus, Ventus-2c and Ventus-3S.
Some slightly older gliders, such as the Discus b, use this part for both the front and the back. Others will have a longer pin at the back. You can find it in the suggested product list. Please check carefully which version your glider uses.
from 1 € 61.26 incl. 19% VAT
€ 51.48 -
Pilot stick handle, 19,3 mm
This pilot stick handle is made by Air Ergo Leki for the Schempp-Hirth 19,3 mm diameter control sticks.
3 adaptors are provided for the folowing settings: No SC, SC switch or SC button.
from 1 € 60.73 incl. 19% VAT
€ 51.03 -
Air filter for SOLO 2625-01 and 2625-02
This air filter RU 2690 (Solo ref: 25 00 580) is used for the Solo 2625-01 and 2625-02.
from 1 € 59.67 incl. 19% VAT
€ 50.14 -
Pilot stick bag for single seaters and double seater rear seat
This fabric bag is placed around the pilot stick of all single seater and at the rear seat of the double seaters. This model is not adapted for the Quintus, the Arcus edition 2020 and the Ventus-3. You can find the model for the front seat of the double seater in the suggested products.
It is a safety feature, preventing things going inside the controls. If it get old or damaged you can replace it.
It is sold without frame.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Pilot stick bag for double seater front seat
This fabric bag is placed around the pilot stick of the front seat of the double seaters. This model is not adapted for the Arcus edition 2020.
It is a safety feature, preventing things going inside the controls. If it get old or damaged you can replace it.
It is sold without frame.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Flight manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
In order to make this manual specific to your glider, you will need to put together the revisions that are relevant for your glider. We are just sending you all the revisions on a PDF version.
Please use the delivery option “Pick Up at Schempp-Hirth” to avaoid to pay for shippment if you are ordering only the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Maintenance manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
To adapt this manual to your glider, you must assemble the revisions relevant to your specific glider. We are just sending you all revisions in a PDF version.
Please use the delivery option "Pick up at Schempp-Hirth" to avoid shipping fee if you only order the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Kit for rudder pedal adjustment
This kit contains all you need to replace the pedal adjustment mechanism, including the instructions.
It is made for the Ventus b, Ventus c, Ventus-2, Discus, Discus-2, Nimbus-4, Duo Discus and the Arcus.
On the Nimbus-4, the Ventus, the Discus and the Duo Discus the mecanisme included a spring. It is now replace by a gummi band. With this kit, you can upgrade the old sytem to the newest one.
from 1 € 56.66 incl. 19% VAT
€ 47.61 -
Wing attachment bolt for double seaters, back
The visible part of the peg is 78,5 mm long and has a diameter of 18 mm. The inner part is 42 mm long and has a diameter of 40 mm.
It is used on the wing roots back part of the Nimbus-3D, the Nimbus-4D, the Duo Discus and the Arcus. It is not adapted for the Janus.
from 1 € 55.07 incl. 19% VAT
€ 46.28
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.