-
Decompression retraction sheet, for SOLO 2350
This part is 148 x 20 x 20 mm.
It is used for all Duo Discus T and Arcus T. It is also used in association with the turbo pylon of the single seater designed in 2000. The Discus-2T (SN>40), the Discus-2cT (SN>35) and the Ventus-2cT (SN>184) have been produced with the new pylon and this decompression retraction sheet while older models might have been modified. The latest Nimbus-4DT are also usin this part. The older retraction sheet looks different, so look carefully at the picture. You can find the older model here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 39.03 incl. 19% VAT
€ 32.80 -
Bellow V6-0714 for the elevator drive
This rubber boot surrounds the upper part of the elevator rope.
It is 70 mm long and 75 mm large and the diameters of the openings are 65 and 18 mm.
from 1 € 38.48 incl. 19% VAT
€ 32.34 -
Temperature gauge
The temperature-indicator TF-00-059 is compact and readable. It temperatur captor can easily reach the front ventilation with its 125 cm cable.
This thermometer is mandatory for all the Schempp-Hirth gliders with water ballast.
from 1 € 37.90 incl. 19% VAT
€ 31.85 -
Set of gaskets for main brake cylinder, Form 6, 7
This set of gasket can replace the on the main brake cylinder form 6 or 7. It is very likely that this type of cylinder is installed in the Duo Discus (but not in the x or xL), some Nimbus-4(D), as well as in some retrofitted Nimbus and Janus.
It do not work with the rectangular brake cylinder installed on some gliders (Ref: B40-1014).
from 1 € 37.83 incl. 19% VAT
€ 31.79 -
Cooler cap, 1,4 bar, for Solo 2625 type "i" from PVL
This lid is used for the cooler of all the Ventus-3M (Solo 2625-01i and 2625-01i neo) and all the Arcus M (Solo 2625-02i) after 2018 but not for the other version.
Please note that if the radiator of your glider is not black, you might need a different lid. Please contact Spare Parts.
from 1 € 37.56 incl. 19% VAT
€ 31.56 -
Tailwheel tyre 200x50
This 6PR tire from TOST AERO is used for all the 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 37.37 incl. 19% VAT
€ 31.40 -
Polyflex brake hose for the Duo Discus
This Polyflex brake hose fits the classic Duo Discus equipped with master cylinder model 7 and 30-9 brakes.
The hose length is 600 mm.
Depending on your glider configuration, you may also require two adapters, which can be found under recommended products (references: L07-1346 and L07-0406).
from 1 € 36.26 incl. 19% VAT
€ 30.47 -
Turbulator tape 0,8x5 for almost all gliders (Roll)
This turbulator band (or Noppenband) is 10 mm large and self-adhesive . The dimples are 0,8 mm high and they are distanced by 5 mm.
It is very often used on Schempp-Hirth glider but look at your sealing instructions as some gliders, like the Arcus and the Ventus 3, are using a different turbulator tapes.
The roll is 10 metres long.
from 1 € 35.99 incl. 19% VAT
€ 30.24 -
Hoodie Navy
The perfect hoodie for the airfield, soft and casual cut. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 80% cotton, 20% polyester (280 g/m²)
Color: Navy
Available in sizes S to XXLfrom 1 € 35.00 incl. 19% VAT
€ 29.41 -
Schempp-Hirth Hoodie Turquoise for women
The perfect hoodie for the airfield in a soft and casual cut. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 80% cotton, 20% polyester (280 g/m²)
Color: Turquoise
Available in sizes S to XXLfrom 1 € 35.00 incl. 19% VAT
€ 29.41 -
Bracket for battery box
This fiberglass bracket is designed for 7.5 Ah battery holders.
It has a width of 38 mm and fits a 97 mm battery. The shape is straight.
A similar model (F60-0651) features a bend and is used in several gliders, including the Duo Discus XL and the Arcus. Please check the model installed in your glider carefully before purchasing.
from 1 € 33.84 incl. 19% VAT
€ 28.44 -
Cockpit symbol for Arcus
This label is made for the Arcus (Arcus M SN<216 and Arcus T SN<90).
from 1 € 33.32 incl. 19% VAT
€ 28.00from 1 € 36.54 incl. 19% VAT
€ 30.71from 1 € 33.32 incl. 19% VAT
€ 28.00 -
Cockpit symbol
These pictograms can be used in Discus-2 and Duo Discus.from 1 € 33.32 incl. 19% VAT
€ 28.00 -
Back canopy hinge for Arcus, Duo Discus XL and Nimbus-4DL
This hinge is made of aluminium. It is different than the front hinge made of carbon fiber.
from 1 € 31.80 incl. 19% VAT
€ 26.72 -
Cover for mounting slot of the outer wing, for Discus-2c and Ventus-3
This cover is 20 x 120 mm and it is made to cover the mounting slot of the outer wing panel of the Discus-2c and Ventus-3.
The model you need maybe different. For example, this item doesn't fit the Nimbus-4D. To order another cover type, please contact Schempp-Hirth Spare Part.
from 1 € 31.36 incl. 19% VAT
€ 26.35 -
Retrieval line Dyneema BWS
This retrieval Line Dyneema is coated and talc-powdered.
The roll contain 25 m.
5 meter cleaning fialment are also provided !
from 1 € 30.94 incl. 19% VAT
€ 26.00 -
Pneumatic tension spring 350 N for Ins. Panel of the Discus-2b,-2c and Ventus-2c
This 350 N gas strut is 293 mm long.
It is used for the foldable instrument panel of the Ventus-2c, Ventus-2bx, Discus-2a, Discus-2b and Discus-2c.
from 1 € 30.37 incl. 19% VAT
€ 25.52 -
Aileron drive cover for Duo Discus
from 1 € 29.24 incl. 19% VAT
€ 24.57 -
Cockpit symbol for Discus-2c
This label is made for Discus-2cfrom 1 € 28.98 incl. 19% VAT
€ 24.35 -
Spherical bearing GL 14
This spherical bearing is adapted for 14mm diameter pin of the single seaters.
The internal diameter is 14 mm and the part is 25x25x8-11 mm.
from 1 € 28.56 incl. 19% VAT
€ 24.00 -
Spark plug connector 5k Ohm - V2
This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.
SOLO spare part n° 23 00 701 V1
This part was originally black, then changed to red, and has now been superseded by this new reference.
from 1 € 28.44 incl. 19% VAT
€ 23.90
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.