-
spherical bearing GL 18
This spherical bearing is adapted for 18mm diameter pin of the double seaters.
The internal diameter is 18 mm and the part is 32x32x14 mm.
from 1 € 17.06 incl. 19% VAT
€ 14.34 -
from 1 € 17.26 incl. 19% VAT
€ 14.50 -
Rod end bearing 14c6, M8x58
Rod end bearing with a 14c6 head and M8 x 58 length body.
Other rod end bearings are used in our gliders. If you are not sure which one you need. Please contact the Spare Part team.
from 1 € 17.41 incl. 19% VAT
€ 14.63 -
Distance washer for tailwheel
This washer is 16 x 2 x 4,5 mm and it is used for the tail wheel
from 1 € 17.62 incl. 19% VAT
€ 14.81 -
Distance washer for tailwheel
This washer is 16 x 2 x 5,5 mm and it is used for the tail wheel.from 1 € 17.62 incl. 19% VAT
€ 14.81 -
Radachse für Lindner Flügelrad für Arcus and Ventus-2c
This wingtip wheel axle is used for the Arcus and Ventus-2c.
The safety ring spring can be found in the suggested products below.
from 1 € 17.67 incl. 19% VAT
€ 14.85 -
BWS springs for Flexiwiper
These replacement springs are specifically designed for use with the BWS Flexiwiper system. Each set is sold as a matched pair, for the left and right Flexiwiper unit.
Important compatibility note:
These springs are not compatible with the Ventus-3 or Arcus edition 2020 Garagewipers models.from 1 € 17.85 incl. 19% VAT
€ 15.00 -
BWS springs for Flexiwiper in a garage
These replacement springs are specifically designed for use with the BWS Garagewiper system. Each set is sold as a matched pair for the left and right wiper units.
Important compatibility note:
These springs are not compatible with the classic Flexiwiper model.from 1 € 17.85 incl. 19% VAT
€ 15.00 -
Special screw for Arcus M and Ventus-3M tailwheel axle
This M8 screw is design for the steering tail wheel axle of the Arcus-M and the Ventus-3M.
from 1 € 17.87 incl. 19% VAT
€ 15.02 -
Bellows V6-905 for the fin tank
This rubber boot ensures the sealing of the tail ballast of most of the Schempp-Hirth gliders.
It is advisable to replace it every 2-3 years to avoid water leaks.Its dimensions are 72 x 38 mm.
from 1 € 18.31 incl. 19% VAT
€ 15.39 -
Green ball knob for trim
This handle for the trim is a format 25 mm, M6. It is made in aluminium and green powdered.
from 1 € 18.34 incl. 19% VAT
€ 15.41 -
Flat spring for Janus, Nimbus-2, -3D, -4D flap drive
This tension spring is used to maintain the flap handle on the right position.
On the Janus B and Nimbus-2, it is located near the front seat handle.
Originally, the Janus C, the Nimbus-3D and the Nimbus-4D are using another spring that looks very different (ref B40-2417) and that is located on the back seat cockpit wall. However some gliders have been modified and they are now using this flat spring but near the spar bridge.
The other reference is available below under the suggested products.
from 1 € 18.64 incl. 19% VAT
€ 15.66 -
Cable roll with bearing 626 ZZ
This pulley with 626-ZZ bearing is used for the hook release mechanism and for some turbo actuation systems.from 1 € 19.23 incl. 19% VAT
€ 16.16 -
Tube 3.00/4.00-4 (260x85)
This tube is used for the the 3" front wheel of the double seaters and the single seater 4" main wheel.
Carefull, the valve is only 32 mm long.
from 1 € 19.39 incl. 19% VAT
€ 16.29 -
Hose clamp for the water ballast in the wing
The clamp is suitable for hoses with diameters ranging from 12 mm to 18 mm and is used on some gliders for the water ballast system in the wing.from 1 € 19.40 incl. 19% VAT
€ 16.30 -
Fuel hose
This hose NW 4,8x1,6 mm is transparent and it is use for the Fuel sytem.
It is sold my the meter.
from 1 € 19.63 incl. 19% VAT
€ 16.50 -
fix-o-moll "V" profile sealing, for the vertical fin rudder sealing
A roll contains 10 m of sealing.from 1 € 19.88 incl. 19% VAT
€ 16.71 -
Schempp-Hirth T-shirt
High-quality T-shirt with a round neck in a classic shape. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 100% cotton.
Color: Navy
Fit: Regular Fit
Available in sizes XXS to XXLfrom 1 € 20.00 incl. 19% VAT
€ 16.81 -
Tesafix roll 9 and 12 mm
This double side tape (Tesafix 4965) is used for control surface sealing and is available in 2 different widths: 9 or 12 mm.
A roll contains 50 meters of tape.
from 1 € 20.15 incl. 19% VAT
€ 16.93from 1 € 20.74 incl. 19% VAT
€ 17.43from 1 € 28.02 incl. 19% VAT
€ 23.55 -
Bellow V6-0052 for waterballasts
This flexible rubber boot is 63 x 39x 39 mm with a 10 mm and a 25 mm opening.
It is surrounding the ballast rod on the wing root of the Discus b, Ventus-2 (SN < 561), Discus-2a and Discus-2b (SN< 234) which have been produced before June 2009. However, some of these gliders might have been retrofitted with the newer system. You can see on the suggested product the other bellow.
It is used for the ballast system of the Nimbus-3, -3D, -4 and -4D. For the Nimbus, the bellow may need to be adapted by cutting the larger end.
It is also used as a sealing around the brake line when crossing the wheel box in all single seaters.
from 1 € 20.15 incl. 19% VAT
€ 16.93 -
Flap position symbol for the Arcus
This label is made for the original Arcus.
from 1 € 20.93 incl. 19% VAT
€ 17.59
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.