-
propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
from 1 € 518.49 incl. 19% VAT
€ 435.71 -
Master brake cylinder for the Duo Discus and Nimbus-4D
This Master Cylinder Model 7 is used on the older Duo Discus and Nimbus-4D aircraft equipped with 30-9 brakes.
from 1 € 514.27 incl. 19% VAT
€ 432.16 -
KIT for fuel hose replacement at the 5-year inspection for Arcus M
This kit contains all the fuel hoses that need to be replaced during the 5 years inspection on the Arcus M.from 1 € 503.85 incl. 19% VAT
€ 423.40 -
Embout L'Hotellier RMZ 9. 41.2.2.2
L'hotellier connector for gliders with manual control hookups.
It is sold by the unit.
from 1 € 481.12 incl. 19% VAT
€ 404.30 -
Tyre 15X6.00-5 (380x150) for the double seater
This 5" tire (380x150/15X6.00-5, RB 06120 TT) is used for the double seaters.
from 1 € 471.24 incl. 19% VAT
€ 396.00 -
Horizontal tailplane fitting, rear part
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders.
Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
To change this part you may also need screws and washers that can be added as an option.
from 1 € 428.52 incl. 19% VAT
€ 360.10 -
RPM sensor, with pins, for Arcus M
This RPM sensor with cables and pins is used for the Solo 2625-02i.
from 1 € 399.16 incl. 19% VAT
€ 335.43 -
Steerable tailwheel TOST Mini 150x30
This tailwheel Max "X/S" is designed for the Ventus-2cM and it is available as an option for the Ventus-3 Sport. It is 150x30 mm and filled with foam.
This model it isn't adapted to the Ventus_2cM carbon fork so if the wheel currently in place is less than 150 mm, please contact Schempp-Hirth spare-part service.
from 1 € 395.79 incl. 19% VAT
€ 332.60 -
Main brake cylinder for Ventus-2 and Discus-2 using the disc brakes type Magura (Option)
This system is used for the Ventus-2 and the Discus-2 which are using the 5" Cleveland wheel from TOST and with a “Magura” cylinder brake.from 1 € 375.87 incl. 19% VAT
€ 315.86 -
Automatic control connection for single seaters (exc. Ventus-3)
This bell crank is used on Discus b, Discus c, Discus-2a, -2b, -2c, Ventus b, Ventus c and Ventus-2a, -2b, -2c.
You may need to change them according to the TN 349-43.
You can buy the screws and bolts needed to change the part as an option. This option is currently un available but will be back within a few weeks.
from 1 € 373.60 incl. 19% VAT
€ 313.95 -
Airbrake drive funnel
This drive funnel is used on almost all Schempp-Hirth gliders except the Nimbus-4 and the Ventus-3.
Two lock nuts M 6-8, DIN 985 and a lock nut M6 TRELOC, DIN 439 are included. However, your glider has a specific set of distance washer that are not provided. Please before disassemble the funnel make sure you know which washer go where.
On the Ventus-2 and Discus-2c, you may also need a set of screws that can be baught as an option.
from 1 € 370.99 incl. 19% VAT
€ 311.76 -
AIRBATT 12V 20Ah tail battery for Duo Discus and Arcus
LiFePO Battery for the Tail of the Duo Discus or Arcus
Tested and in like-new condition, but a few years old.
Reference. 8000652 AIR-LFP1220-1
12V 20Ah c20 256WhPlease note: Shipping is not available. Pick-up only!
from 1 € 357.00 incl. 19% VAT
€ 300.00 -
BWS Flexiwiper by Laminar Aerotec
From wing root to wing tip: The patented joint system adapts to the profile of the glider type during the cleaning process.
At a glance:
- A bug wiper for all types of glider.
- Aerodynamic shape.
- Streamlined, therefore minimum resistance.
- Fiber reinforced plastics with high strength.
- No buckling and no twisting of the components.
- UV-resistant.
- Double guided cleaning fialments: cleans efficiently and glides stably.
- Rests against the profile above and below the wings during the cleaning process.
- Fast mounting.
The BWS Flexiwiper can be retrofitted to almost any glider. For all Schempp-Hirth gliders, the retrival line is routed below the wing. Only this option is available in this shop. Before ordering for another type of glider, you have to consider whether the retrieval line is routed above or below the wing.
The package includes:
- 1 left and 1 right bug wiper inclusive fialments.
- 2 x tilt bracket to fit the fuselage.
- Installation manual.
You can find spare parts and related item below.
from 1 € 354.62 incl. 19% VAT
€ 298.00 -
Steerable tailwheel "Max II" 200x50
This wheel is made by Tost for the tail of the Arcus M, Ventus-3M and the Quintus M.
It is made in two parts, and it is adapted for a 12 mm axle and 200 x 50 tyres and tubes. In aluminium, silver anodized, it weights less than a kilo.
from 1 € 336.06 incl. 19% VAT
€ 282.40 -
V-belt for Ventus-3M SOLO 2625-01i
This item is 1 set of 5 pieces.
SOLO spare-part n° 00 57 225
from 1 € 328.94 incl. 19% VAT
€ 276.42 -
Tube 5.00-5 (and 6.00), TR67
This tube fits 5.00 and 6.00 tyres.
Its long valve is adapted for the double seaters, except if they have a TOST Penta wheel.
It is also used for the single seater with a 5" wheel equiped with a TOST drum brakes like the Kobold 5".
You can find the tube 5.00-5, TR87, with a sort valve, in the suggested products.
This item is discontinued until further notice. We are sorry for the inconvenience.
from 1 € 325.57 incl. 19% VAT
€ 273.59 -
Pre-assembled fuel line for TN 627-6
The TN 627-6 is recommended for the Ventus-3M (SN < 193) with a Solo engine 2625 01i with the new throttle or equipped with the 2625 01i Neo.
Please read carefully the Technnical Note.
Tests on powered gliders with engine SOLO 2625 01i equipped with the new throttle system (SOLO TM 4600-9) or with engine SOLO 2625 01i neo have shown that a changed position for the connection of the fuel line to the throttle system leads to a more even fuel supply to both cylinders. According to previous experience, this change improves the power output of the engine especially under unfavourable ambient conditions.
from 1 € 318.99 incl. 19% VAT
€ 268.06 -
Tail wheel cover for single seater version sport
This cover is designed to fit the TOST Mini 150 wheel.
If your glider is currently equipped with a classic Schempp-Hirth tailwheel, you can upgrade to the more compact TOST Mini 150. To make this conversion, you'll need this cover, a TOST Mini wheel, and a set of washers. All required components are listed below.
from 1 € 316.67 incl. 19% VAT
€ 266.11 -
Tyre 5" thin (336x115) 10pr
This tire (Tost p/n 065221 ) is a special 5" made by TOST AERO for the Discus-2b, -2c, the Ventus-2c and the Ventus-3 . It is a bit smaller than a classic 5" so the tyre is not touching the landing gear box.
from 1 € 316.16 incl. 19% VAT
€ 265.68 -
Elevator U-bracket
This item is part of the elevator control and horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
When you remove the previous U-bracket, keep the screws! If they are not damaged, we advise you to use them again. However, we are providing new lock washers.
If you also need the screws, the reference are: 2x 6k screws 06036 LN 9037 and 4x 6k screws M06x18 - 8.8 DIN933 / ISO 4017 (See suggested products).
from 1 € 288.11 incl. 19% VAT
€ 242.11 -
Landing gear spring strut for all almost single seaters
This item is part of the landing gear of all the modern Schempp-Hirth single seater, with a landing gear in metall.
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with glass fiber undercarriage need another strut. It looks different but if you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
from 1 € 282.53 incl. 19% VAT
€ 237.42
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.