-
Mylar convex 0,19 mm, 22, 25 and 30 mm, Roll
This Mylarband, also named Hostaphanband or Profilband, is pre-curved and used for control surface sealing.
It is available in 3 different widths: 22, 25 and 30 mm. They are often refered as "Profilband 22mm / 0.19 mm strongly vaulted (vorgewölbt)", "Profilband 25 mm / 0.19 mm gewölbt" and "Profilband 30mm / 0.19 mm stark vorgewölbt".
A roll contains 15 meters of tape.
Note, 3 other models exist: plain, asymmetric curved and asymetric curved scarfed. Please refer to your glider control sealing instructions for more information.
from 1 € 68.37 incl. 19% VAT
€ 57.45from 1 € 54.62 incl. 19% VAT
€ 45.90from 1 € 51.76 incl. 19% VAT
€ 43.50from 1 € 74.79 incl. 19% VAT
€ 62.85 -
Flap latch-in element for Ventus-2b
This part is used for the notching of the flaps of the Ventus-2b.
It is 135 mm long and the screw holes are spaced 50 and 69 mm apart respectively.
from 1 € 109.37 incl. 19% VAT
€ 91.91 -
Bellow V6-269 for water ballast control rod
This rubber boot is surrounding the water ballast control rod to avoid the water leaking through. It is used in several Schempp-Hirth gliders including the Nimbus-2, Ventus, Ventus-2c, Discus-2c, Duo Discus and the Arcus.
It is 125 x 22 x 22 mm with a 7 mm and a 16 mm opening.
Over the years, other bellows and different combinations have been used. You can find them underneath this description, in the "suggested products", if you want to compare them with the model that you wish to replace.
from 1 € 21.74 incl. 19% VAT
€ 18.27 -
Perspex disc 78,3 mm with 5 mm hole
This perspex disc is made for Arcus, all Duo Discus, Ventus-3, Discus-2b, -2c, Discus b and cs.
However, some gliders have more than one perspex disc and they can be different. Please look at the diameter and model you need.
Its diameter is 78,3 mm and the central hole is 5 mm.
from 1 € 3.65 incl. 19% VAT
€ 3.07 -
Turbulator tape 0,85x16 (roll)
This turbulator band (or Noppenband) is 10 mm large. The dimples are 0,85 mm high and they are distanced by 16 mm.
This model is mainly used for the Arcus and the Ventus-3. Look at your sealing instructions for more information.
A roll is 10 meters.
from 1 € 3.42 incl. 19% VAT
€ 2.87 -
Turbulator tape 0,85x10 (per meter)
This turbulator band (or Noppenband) is 10 mm large. The dimples are 0,85 mm high and they are distanced by 10 mm.
This model is mainly used for the Ventus-3. Look at your sealing instructions for more information.
It is sold by the meter.
from 1 € 6.09 incl. 19% VAT
€ 5.12 -
Canopy window rail
The canopy window rail device including screws. The screws are in metal but as an option, you can order it in plastic.
These rails are made for the Mecaplex canopy. It is the only model currently available, but you may need to customise it a little if you have a Weis canopy.
from 1 € 49.98 incl. 19% VAT
€ 42.00from 1 € 55.09 incl. 19% VAT
€ 46.29from 1 € 55.09 incl. 19% VAT
€ 46.29from 1 € 110.17 incl. 19% VAT
€ 92.58 -
Water filler cap for Arcus Edition 2020
This sealing lid is for the Arcus edition 2020.
It is equipped of a non-return valve.
from 1 € 106.60 incl. 19% VAT
€ 89.58 -
Water filler cap sealing for Ventus-3
This sealing is made for the Ventus-3 sealing caps.
Its diameter is 26 mm and the sealing is 4,0mm thick.
from 1 € 8.19 incl. 19% VAT
€ 6.88 -
Outer water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 outer wing.
The plug used for the inner wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 27.75 incl. 19% VAT
€ 23.32 -
Inner and middle water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 inner wing.
The plug used for the outer wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 22.24 incl. 19% VAT
€ 18.69 -
Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.
This silent block is used for the cooler of the Arcus M, Ventus-3 and Quintus engine.
The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.
from 1 € 3.06 incl. 19% VAT
€ 2.57 -
Rubber buffer 20x25, M6x18 for the radiator of the Ventus-2cM and Nimbus-4DM.
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM and Arcus M engine.
The head is 25 mm and the screw 18 mm. Its diameter is 20 mm.
Look at the model(s) that you want to replace and order the same. According to your glider, you might also want this rubber buffer.
from 1 € 9.21 incl. 19% VAT
€ 7.74 -
Rubber buffer 25x10, M6x10 for the E-Box / radiator
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM, all Arcus M, all Ventus-3M and the Quintus.
The head is 10 mm and the screw 10 mm. Its head diameter is 24 mm. Look at the model(s) that you want to replace and order the same.
from 1 € 2.74 incl. 19% VAT
€ 2.30 -
Pneumatic tension spring 300 N for instr. panel of the Discus b, Discus-c, Ventus c, Ventus-2b
This 300 N gas strut is 313 mm long.
It is used for the foldable instr. panel of the Discus-2c FES, Discus b, Ventus c and Ventus-2b.
from 1 € 27.73 incl. 19% VAT
€ 23.30 -
Pneumatic tension spring 350 N for Ins. Panel of the Discus-2b,-2c and Ventus-2c
This 350 N gas strut is 293 mm long.
It is used for the foldable instrument panel of the Ventus-2c, Ventus-2bx, Discus-2a, Discus-2b and Discus-2c.
from 1 € 30.37 incl. 19% VAT
€ 25.52 -
Pneumatic tension spring 450 N for Ins. Panel for the Duo Discus xL and the Arcus
This gas strut is 450 N and 178 mm long.
It is used for the foldable instrument panel of Arcus and Duo Discus XL.
from 1 € 23.73 incl. 19% VAT
€ 19.94 -
Hexagon Screw 06036, LN 9037
This 6k-screw is used for the elevator drive U-bracket.
from 1 € 1.71 incl. 19% VAT
€ 1.44 -
Hexagon Screw M06x18 - 8.8, DIN 933 / ISO 4017
This 6k-Screw is used for the elevator drive U-bracket.from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Safety ring-spring steel, DIN471, size 8
This safety ring-spring steel, DIN471, size 8 is used to secure the Lindner wingtip wheel axle.from 1 € 0.55 incl. 19% VAT
€ 0.46 -
Front canopy hinge for Arcus, Duo Discus xL and Nimbus-4DL
This hinge is for the canopy of all Arcus, Duo Discus xL and Nimbus-4DL.
This front hinge is printed in 3D and will break in case of evacuation. If it happens accidentally, it is possible to replace it. This hinge was previously in carbon fiber but you can replace it by that one with minor adjustments.
Note: the hinge at the back is different.
from 1 € 92.32 incl. 19% VAT
€ 77.58 -
Self lock nut M6-8 and M8-8
Safety nut, DIN 985 galvanized
Availabe in thread size M6 or M8.
from 1 € 0.24 incl. 19% VAT
€ 0.20from 1 € 2.38 incl. 19% VAT
€ 2.00from 1 € 0.24 incl. 19% VAT
€ 0.20from 1 € 0.24 incl. 19% VAT
€ 0.20 -
O-Ring Ø68 x Ø07,00mm NBR 70 for the propeller of the single seater with turbo Solo 2350
from 1 € 4.08 incl. 19% VAT
€ 3.43 -
pneumatic spring 500N for engine mount.
This gas strut is 500N and it is used for the engine mount of the Ventus T, Discus T, Ventus cM, the Nimbus-3T and the Nimbus-4T.
More modern single seaters are using the reference L03-0122, that is 600N. You can find it on the suggested product.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Roll pin for aileron
These roll pins are used to secure the aileron.
Dimension: 2 x 10 mm
DIN 1481 / ISO 8752
from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Cover for mounting slot of the outer wing, for Discus-2c and Ventus-3
This cover is 20 x 120 mm and it is made to cover the mounting slot of the outer wing panel of the Discus-2c and Ventus-3.
The model you need maybe different. For example, this item doesn't fit the Nimbus-4D. To order another cover type, please contact Schempp-Hirth Spare Part.
from 1 € 31.36 incl. 19% VAT
€ 26.35 -
Flap latch-in element for Ventus c
This part is used for the notching of the flaps of the Ventus c.
It is 135 mm long and the screw holes are spaced 50 and 68 mm apart respectively. The space between the first and the last step is 90 mm. Please look carefully at the drawing to make sure that it is really the part you need.
from 1 € 105.15 incl. 19% VAT
€ 88.36 -
Washer M06 galvanized, DIN 125 / ISO 7090 Form B
Washer M06 galvanized, DIN 125 / ISO 7090 Form Bfrom 1 € 0.24 incl. 19% VAT
€ 0.20 -
Spindle suspension with bushing
This rubber element is part of the spindelsuspension of the Ventus-2cM, Ventus-3M, Nimbus-4M, -4DM and Arcus M.
It is 34 mm long.
Depending on the equipment available to you, it might be easier to buy the complete part (B40-13772). See suggested products.
from 1 € 42.84 incl. 19% VAT
€ 36.00 -
Perspex disc 53,5 mm with 5 mm hole
This perspex disc is made for the Ventus-2a.
Its diameter is 53,5 mm and the central hole is 5 mm.
from 1 € 16.79 incl. 19% VAT
€ 14.11 -
Ignition wire for Arcus M
This ignition cable is 35 cm long and it is used for the Arcus M.
You will need 4 units. if you want to change all of them.
from 1 € 70.25 incl. 19% VAT
€ 59.03 -
Single seater horiz. tailplane sealing for Ventus-3 Sport
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 94,98 x 370,00 mm. It is designed for the Discus-2a, -2b and the Ventus-3 Sport. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself using a Tesa Foam roll.
from 1 € 13.52 incl. 19% VAT
€ 11.36 -
Gasket for canopy frame of the Double Seaters
This gasket is used for the canopy of the Duo Discus and the Arcus.
It is sold by the meter.
from 1 € 10.60 incl. 19% VAT
€ 8.91 -
Elevator- front trim knob for Arcus, all Duo Discus and all Nimbus-4D
This is the handle for the trim of the Arcus, Duo Discus XL and Nimbus-4DL.
The roll pins are included.
Please note the pin roll can be bought separatly (see suggested product). If your glider is older than April 2015, you need to use the 2x14 mm roll pins instead of 2x16 mm.
from 1 € 62.25 incl. 19% VAT
€ 52.31 -
elevator-trim blade spring for Arcus, all Duo Discus, all Nimbus-4D and all Discus
This spring is used for the trim of the Arcus, Duo Discus XL, Nimbus-4DL and all the Discus from the Discus a to the Discus-2c.
It is 25mm lage and the legs are 40mm long. The central part is 12,5mm.
Some glider need roll pins. They are not included but they can be baught individaly (see the suggested products).
from 1 € 4.65 incl. 19% VAT
€ 3.91 -
Roll pin for trim
Roll pin DIN 1481 / ISO 8752 stainless.
They are (mainly) used to in trim of the Arcus, Duo Discus XL and Nimbus-4DL.
There is two models : On gliders produced after April 2015, you will probably need the 2 x 16 mm model. For the older glider you will need to use the 2x14 mm roll pins. Please have a look in your glider to confirm which models you need.
from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Rod end bearing 14c6, M8x58
Rod end bearing with a 14c6 head and M8 x 58 length body.
Other rod end bearings are used in our gliders. If you are not sure which one you need. Please contact the Spare Part team.
from 1 € 17.41 incl. 19% VAT
€ 14.63 -
Gasket exhaust 1,5mm, for SOLO 2350
SOLO Silent block bush, spare part n° 20 61 395
from 1 € 7.75 incl. 19% VAT
€ 6.51 -
Rain protection cap for spark plug
This piece is used to protect the spark plug from the rain in the SOLO 2350 engine.
SOLO spare part n° 00 84 203
from 1 € 4.01 incl. 19% VAT
€ 3.37 -
Schnorr-safety washer
Safety washers Form S available in M6 and M8.
These washers are used, among other things, to secure the rear part of the horizontal tail fitting and the elevator drive U-bracket.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Allen screw M06x21 - 8.8, DIN 912 galvanized
This screw is mainly used to secure the rear part of the horizontal tail fitting.from 1 € 3.20 incl. 19% VAT
€ 2.69 -
washer 6,4, DIN 9021 / ISO 7093-1 galvanized
This washer is mainly used on the rear part of the horizontal tail fitting.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
Hexagon screw 06020, LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2 and Discus-2c.from 1 € 1.58 incl. 19% VAT
€ 1.33 -
Hexagon screw 06021,5 , LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2c and Discus-2c.from 1 € 11.80 incl. 19% VAT
€ 9.92 -
Automatic control connection for single seaters (exc. Ventus-3)
This bell crank is used on Discus b, Discus c, Discus-2a, -2b, -2c, Ventus b, Ventus c and Ventus-2a, -2b, -2c.
You may need to change them according to the TN 349-43.
You can buy the screws and bolts needed to change the part as an option. This option is currently un available but will be back within a few weeks.
from 1 € 373.60 incl. 19% VAT
€ 313.95 -
Fin tank valve for all single seaters (exc. Ventus-3)
This is the complete tank dump valve assembly. It is used for all single seaters except for the Ventus-3.
Arcus and Duo Discus xL have other model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our sparepart team.
from 1 € 213.13 incl. 19% VAT
€ 179.10 -
Fin tank valve for Arcus, Duo Discus xL and Nimbus-4DL
This is the complete tank dump valve assembly. It is used for Arcus, Duo Discus xL and Nimbus-4DL.
Single seaters have another model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our spare part team.
from 1 € 263.34 incl. 19% VAT
€ 221.29 -
KIT for fuel hose replacement at the 5-year inspection for Arcus M
This kit contains all the fuel hoses that need to be replaced during the 5 years inspection on the Arcus M.from 1 € 503.85 incl. 19% VAT
€ 423.40 -
Eta fuse for instuments
These fuses are used for instruments.
They are available in 2, 4 and 6,3 A.
from 1 € 13.09 incl. 19% VAT
€ 11.00from 1 € 20.40 incl. 19% VAT
€ 17.14from 1 € 11.33 incl. 19% VAT
€ 9.52 -
Coolant temperature sensor for Solo 2625 01 and 02
This sensor is used in the Solo 2625 01 and 2625 02 to measure the water temperature.
The sensor used on the Arcus M and Ventus-3M (Solo 2625 01i and 02i) is different. You can find it on the suggested products.
from 1 € 147.80 incl. 19% VAT
€ 124.20
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.