-
Coolant temperature sensor for Solo 2625 01i and 02i
This sensor is used in the Solo 2625 01i and 2625 02i engines to measure water temperature.
Please note that the sensor used in the older Solo 2625 model is different. You can find it under the suggested products.from 1 € 77.43 incl. 19% VAT
€ 65.07 -
Radachse für Lindner Flügelrad für Arcus and Ventus-2c
This wingtip wheel axle is used for the Arcus and Ventus-2c.
The safety ring spring can be found in the suggested products below.
from 1 € 17.67 incl. 19% VAT
€ 14.85 -
fuelling hose, assembled, all models
This hoses are assembled with a filter and the connections to refuel your glider.
from 1 € 214.47 incl. 19% VAT
€ 180.23 -
RPM sensor, with pins, for Arcus M
This RPM sensor with cables and pins is used for the Solo 2625-02i.
from 1 € 399.16 incl. 19% VAT
€ 335.43 -
Special screw for Arcus M and Ventus-3M tailwheel axle
This M8 screw is design for the steering tail wheel axle of the Arcus-M and the Ventus-3M.
from 1 € 17.87 incl. 19% VAT
€ 15.02 -
Tailwheel axle for Arcus M and Ventus-3M
This axle is design for the steering tail wheel of the Arcus-M and the Ventus-3M.
from 1 € 22.54 incl. 19% VAT
€ 18.94 -
Air filter for SOLO 2625-01 and 2625-02
This air filter RU 2690 (Solo ref: 25 00 580) is used for the Solo 2625-01 and 2625-02.
from 1 € 59.67 incl. 19% VAT
€ 50.14 -
Spring for turbo arresting cable for Ventus-2cT, -cxT and Discus-2cT
This tension spring is 1,02 x 11 x 72 mm.
It is used for the arresting cables of the Ventus-2cT, -2cxT and Discus-2cT with engine Solo 2350.
from 1 € 5.31 incl. 19% VAT
€ 4.46 -
Distance washer for tailwheel
This washer is 16 x 2 x 4,5 mm and it is used for the tail wheel
from 1 € 17.62 incl. 19% VAT
€ 14.81 -
Hexagon screw 06032, LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2 and Discus-2c.from 1 € 3.96 incl. 19% VAT
€ 3.33 -
Schempp-Hirth T-shirt
High-quality T-shirt with a round neck in a classic shape. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 100% cotton.
Color: Navy
Fit: Regular Fit
Available in sizes XXS to XXLfrom 1 € 20.00 incl. 19% VAT
€ 16.81 -
Schempp-Hirth Polo for men
A stylish navy polo shirt with a beautiful Ventus-3 drawing on the back. The quality and finish are really good with a fine piqué surface, the finely knitted cuffs and the supple knitted collar. It is also adapted to fly with a comfortables cut and no stitching on the back.
Material: 100% Cotton (195 g/m²)
Color: Navy
Fit: Regular Fit
Available from S to XXLfrom 1 € 25.00 incl. 19% VAT
€ 21.01 -
Schempp-Hirth Polo for women
High-quality polo shirt with elastic, ribbed cuffs and button placket. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 100% cotton (195 g/m²)
Color: Navy
Fit: Regular Fit
Available in sizes S to XXLfrom 1 € 25.00 incl. 19% VAT
€ 21.01 -
Hoodie Navy
The perfect hoodie for the airfield, soft and casual cut. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 80% cotton, 20% polyester (280 g/m²)
Color: Navy
Available in sizes S to XXLfrom 1 € 35.00 incl. 19% VAT
€ 29.41 -
Schempp-Hirth Hoodie Turquoise for women
The perfect hoodie for the airfield in a soft and casual cut. Printed Schempp-Hirth logo on the chest and Ventus-3 drawing on the back.
Material: 80% cotton, 20% polyester (280 g/m²)
Color: Turquoise
Available in sizes S to XXLfrom 1 € 35.00 incl. 19% VAT
€ 29.41 -
Perspex disc 53,5 mm with bracket
This plexi cover is made for the Janus, the Ventus b and some Ventus-2. It is used in the TN 349-42 / 825-57.
Its diameter is 53,5 mm and the central hole is 5 mm. The locking device is 100mm long.
from 1 € 108.15 incl. 19% VAT
€ 90.88 -
V-belt for Ventus-3M SOLO 2625-01i
This item is 1 set of 5 pieces.
SOLO spare-part n° 00 57 225
from 1 € 328.94 incl. 19% VAT
€ 276.42 -
Pre-assembled fuel line for TN 627-6
The TN 627-6 is recommended for the Ventus-3M (SN < 193) with a Solo engine 2625 01i with the new throttle or equipped with the 2625 01i Neo.
Please read carefully the Technnical Note.
Tests on powered gliders with engine SOLO 2625 01i equipped with the new throttle system (SOLO TM 4600-9) or with engine SOLO 2625 01i neo have shown that a changed position for the connection of the fuel line to the throttle system leads to a more even fuel supply to both cylinders. According to previous experience, this change improves the power output of the engine especially under unfavourable ambient conditions.
from 1 € 318.99 incl. 19% VAT
€ 268.06 -
GFRP-cover for Ventus-3M starter ring gear, TN 627-5
This GFRP-cover (G000168) is used for the TN 627-5.
That is recommanded for the Ventus-3M (SN < 183).
Please read carefully the Technnical Note.
from 1 € 213.43 incl. 19% VAT
€ 179.35 -
Air filter for SOLO 2625-02i
This air filter RC-1060 (Solo ref: 25 00 845) is used for the 2625-02i.
It used to be rectangular but the shape changed. You can use this model instead of the square ones.
from 1 € 142.86 incl. 19% VAT
€ 120.05 -
Distance washer for mainwheel
This washer is 14 x 2 x 32 mm and it is used for the main wheel of almost all Schempp-Hirth gliders.from 1 € 8.10 incl. 19% VAT
€ 6.81 -
Shipping for exchange
This is used only in case of exchange, to ship the new partfrom 1 € 0.00 incl. 19% VAT
€ 0.00 -
bug-wiper for Ventus-3 and Arcus “20”
These bug-wipers blades are adapted for all the Ventus-3 variants and the Arcus Edition 2020 with garage for bug-wipers.from 1 € 609.14 incl. 19% VAT
€ 511.88 -
Canopy locking mechanism for Duo Discus and Nimbus-4D
This kit is for the TN 380-1 and TN396-6.
According to your glider, you might need the optional guide or not.
Please read the TNs carefully.
from 1 € 126.14 incl. 19% VAT
€ 106.00from 1 € 332.95 incl. 19% VAT
€ 279.79 -
Landing gear assembly bolts and bushing kit for Duo Discus
This kit is made to replace the main bushes and bolts on the Duo Discus and Nimbus-4D landing gear.
It is not adapted to Duo Discus xL and Nimbus-4DL.
You can find bellow the detail list of all the parts.
This kit is likely out of stock, but you can use the drawing to order the required part through the form.
from 1 € 551.61 incl. 19% VAT
€ 463.54 -
Black T-handle
from 1 € 6.13 incl. 19% VAT
€ 5.15 -
Spring for rudder pedal adjustment
On the Nimbus-4, the Ventus, the Discus and the Duo Discus the mecanism used to included a spring. It is now replace by a gummi band.
With the kit B40-3235, you can upgrade the old sytem to the newest one.
from 1 € 0.00 incl. 19% VAT
€ 0.00 -
Flap handle for some Ventus-2c and the Ventus-3
from 1 € 10.04 incl. 19% VAT
€ 8.44 -
Aileron drive cover for Duo Discus
from 1 € 29.24 incl. 19% VAT
€ 24.57 -
Bush for the rear spindle suspension of almost all the M
This bushing is Ø13x1,5x34,5.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 7.82 incl. 19% VAT
€ 6.57 -
Screw for the rear spindle suspension of almost all the M
This screw is M10 x 58.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 26.18 incl. 19% VAT
€ 22.00 -
Rubber element of the spindle suspension for almost all M
This part is used for the Discus bM, the Ventus-2cM, the Ventus-3M, the Nimbus-4DM and the Arcus M.from 1 € 177.57 incl. 19% VAT
€ 149.22 -
Kit for the FES improved shunt screw connection (TN)
This kit contains:- 2 screws 3/8"- Length: 5/8"
- 2 lock washers
It is used to fulfil the TN 627-8, TN 863-26 and TN 825-59. Please read the TN carefully.from 1 € 7.14 incl. 19% VAT
€ 6.00 -
Decompression retraction sheet, for SOLO 2350 old version
This part is 148 x 20 x 2 mm.
It is used for the old Nimbus-4T and single seater designed before 2000: The Discus-2T (SN<41), the Discus-2cT (SN<36) and the Ventus-2cT (SN<185).
Some of these gliders might have been modified. The new retraction sheet looks different, so look carefully at the picture to order the same that you have on your glider.
You can find the newer one here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 15.98 incl. 19% VAT
€ 13.43 -
Copper mesh wire tube
This braided hose is KAG 3,11 QMM VSN 36 x 11 x 0,10.
It is used with the transparent hose NW 4,8x1,6 (T20-0064485) for the fuel sytem of almost all Turbo, the Ventus-2cM and the Nimbus-4DM.
It is sold by the meter.
Be aware that for Turbo gliders another mesh wire tube KAG 1,32 QMM 24x7x0,1 (ref: L07-0319) is used at the level of the T-connection.
from 1 € 10.25 incl. 19% VAT
€ 8.61 -
Pneumatic spring 1000 N for engine mount for all Arcus T and Duo Discus T
This pneumatic spring is 820 mm long. It is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 46.84 incl. 19% VAT
€ 39.36 -
Rubber element for the almost all modern engine mounts
This rubber element is use for the engine mount of the Arcus M, the Ventus-3M, Ventus-2cM, the Ventus-2cxM, the Nimbus-4M and the Nimbus-4DM.
Its old reference is VW 431407181D.
from 1 € 142.13 incl. 19% VAT
€ 119.44 -
Winglets Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Winglets Arcus “20”. We offer this pair in raw conditions, ready to be laminated for installation on your wingtip.This work requires professional installation and paint finish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern : service(at)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and the SN number of your Arcus. You can enter it below.
from 1 € 4,641.00 incl. 19% VAT
€ 3,900.00 -
Horizontal tailplane Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Horizontal Tailplane Arcus "20" we offer finished in PU paint.Installation requires modification of the vertical to horizontal tailplane junction area.This work requires professional lamination and adjustment before refinish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern: service(a)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and serial number of your Arcus. You can enter it below.
from 1 € 10,762.50 incl. 19% VAT
€ 9,044.12 -
Flight manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
In order to make this manual specific to your glider, you will need to put together the revisions that are relevant for your glider. We are just sending you all the revisions on a PDF version.
Please use the delivery option “Pick Up at Schempp-Hirth” to avaoid to pay for shippment if you are ordering only the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Maintenance manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
To adapt this manual to your glider, you must assemble the revisions relevant to your specific glider. We are just sending you all revisions in a PDF version.
Please use the delivery option "Pick up at Schempp-Hirth" to avoid shipping fee if you only order the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Pressure gauge extension for MH oxygen bottles
This adapter is necessary for the MH Oxygen bottle.
Indeed the neck of these bottle is short and wide and, without the extension, the pressure gauge prevents the neck holder from being installed.
from 1 € 54.00 incl. 19% VAT
€ 45.38 -
Washer Ø12,1XØ17X1,5 for the tailwheel axle
This washer is used for some Schempp-Hirth tailwheel axle with the original 200x50 with or without led.
It is Ø12,1XØ17X1,5.
from 1 € 0.94 incl. 19% VAT
€ 0.79 -
Fuel filters for Arcus M
These filters (1 filter Pierburg 4.00030.80.0 and 1 filter KL14 Mahle) are used for the fuel system of the Arcus M.from 1 € 43.21 incl. 19% VAT
€ 36.31 -
Splint pin 3,2 x 40 for main wheel axle
This splint is used for the main landing gear of almost all Discus, Discus-2, Ventus-2 as well as the Ventus-3.
It is 3,2 x 40 ISO 1234.
from 1 € 0.60 incl. 19% VAT
€ 0.50 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Flat spring for Janus, Nimbus-2, -3D, -4D flap drive
This tension spring is used to maintain the flap handle on the right position.
On the Janus B and Nimbus-2, it is located near the front seat handle.
Originally, the Janus C, the Nimbus-3D and the Nimbus-4D are using another spring that looks very different (ref B40-2417) and that is located on the back seat cockpit wall. However some gliders have been modified and they are now using this flat spring but near the spar bridge.
The other reference is available below under the suggested products.
from 1 € 18.64 incl. 19% VAT
€ 15.66 -
Main wheel for Ventus-3
This item is composed of the rim, the tire and the inner tube. It is adapted for the Ventus-3.from 1 € 1,674.53 incl. 19% VAT
€ 1,407.17 -
Red LED for fire warning 10 mm
This LED is blinking in RED. It has been use for gliders with Motor and FES.
A few old FES might have had an 8mm LED, it is not available anymore. You will also need to change the support to the new one (Ref: E11-014). Please contact the spare part team using the online Form.
from 1 € 3.71 incl. 19% VAT
€ 3.12 -
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.