-
Water filler cap top
This plug is 5 mm high and its diameter is 36 mm. It fit all the Ventus 2, Discus 2, Nimbus 3, Duo Discus and the first Arcus.
Dependant on the glider, older Ventus and Discus can need this model or a 35 mm diameter sealing cap that is 7,5 mm high. Please look at your current model to order the same. If you need the thick sealing cap, you can order it through Schempp-Hirth spare-part form.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 9.64 incl. 19% VAT
€ 8.10 -
Landing gear door hinge for Arcus, Duo Discus and Nimbus-4
These hinges are used to fix the landing gear door of the Arcus, Nimbus-4 and Duo Discus.
The countersunk screws (fuselage side) and countersunk-head rivet and their washers (door side) can be ordered as an option.
from 1 € 39.41 incl. 19% VAT
€ 33.12 -
Tyre 4.00-4 Tost AERO 8 pr
This tire (Tost p/n 064491) is used for the the 4" wheel of the single seater (before the Ventus-2c and the Discus-2b).
from 1 € 112.10 incl. 19% VAT
€ 94.20 -
Distance gummi for propeller blade on the Duo Discus T, Duo Discus XLT and Arcus T
Two models exist, with or without a base, please choose the model who is already on your glider.
They are 10 mm high.
They are sold individually but you will need 5 of them for your glider.
from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 14.03 incl. 19% VAT
€ 11.79 -
Bowden cable 5,3x4,4x3,0 mm
This bowden cable is 5,3 x 4,4 x 3,0 mm. It can also be referred to as 5.51.0000.022.
It is sold by the meter and includes 2 cable end caps.
This cable is often used for the wheel brake systems. Please refer to your maintenance manual for the type of cable you need and how to make the connections.
from 1 € 6.27 incl. 19% VAT
€ 5.27 -
Roll pin for aileron
These roll pins are used to secure the aileron.
Dimension: 2 x 10 mm
DIN 1481 / ISO 8752
from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Tailwheel axle for Arcus M and Ventus-3M
This axle is design for the steering tail wheel of the Arcus-M and the Ventus-3M.
from 1 € 22.54 incl. 19% VAT
€ 18.94 -
Horiz. Tailplane Pin, Kit.
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. The kit provides all the necessary parts to change 1 pin.
from 1 € 98.19 incl. 19% VAT
€ 82.51 -
Bellows V6-905 for the fin tank
This rubber boot ensures the sealing of the tail ballast of most of the Schempp-Hirth gliders.
It is advisable to replace it every 2-3 years to avoid water leaks.Its dimensions are 72 x 38 mm.
from 1 € 18.31 incl. 19% VAT
€ 15.39 -
DZUS-quick fastener pin
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 5.05 incl. 19% VAT
€ 4.24 -
Temperature gauge
The temperature-indicator TF-00-059 is compact and readable. It temperatur captor can easily reach the front ventilation with its 125 cm cable.
This thermometer is mandatory for all the Schempp-Hirth gliders with water ballast.
from 1 € 37.90 incl. 19% VAT
€ 31.85 -
Landing gear door hinge for single seater
These hinges are used to fix the landing gear door of almost all single seater.
Their dimensions are: 30 x 30 x 0,8 mm
The countersunk screws (fuselage side) and countersunk-head rivet with their washers (door side) can be ordered as an option.
from 1 € 2.13 incl. 19% VAT
€ 1.79 -
Tyre 2.80/2.50-4 for double seater nose wheel
This 2.80/2.50-4 tire is used for the front wheel of the Janus, Duo Discus, and Arcus.
Previously, a 3" tire (D 3.00-4 IND IC35 4PR) was used, but that model has been discontinued. This tire serves as a suitable replacement.
from 1 € 190.40 incl. 19% VAT
€ 160.00 -
Spark plug connector 5k Ohm - Discontinued
This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.
SOLO spare part n° 23 00 701 V1
These old models are no longer available and it is replaced by a new reference.
from 1 € 0.00 incl. 19% VAT
€ 0.00 -
Embout L'Hotellier RMZ 9. 41.2.2.2
L'hotellier connector for gliders with manual control hookups.
It is sold by the unit.
from 1 € 481.12 incl. 19% VAT
€ 404.30 -
Air filter for SOLO 2625-01 and 2625-02
This air filter RU 2690 (Solo ref: 25 00 580) is used for the Solo 2625-01 and 2625-02.
from 1 € 59.67 incl. 19% VAT
€ 50.14 -
Rubber washer 19x3 mm for the fin tank dump valve
This rubber washer ensures the sealing of the tail ballast of most of the Schempp-Hirth gliders.
It is advisable to replace it every 4-6 years to avoid water leaks.from 1 € 0.82 incl. 19% VAT
€ 0.69 -
DZUS S-washer
This washer is used with the DZUS-quick fastener pin. It is size 6, its diameter is 12 mm and it is made of plastic.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Rear-view mirror
from 1 € 83.06 incl. 19% VAT
€ 69.80 -
Shim washer for 10 mm diameter wing bolt
These washers are 14x9,8x0,5 mm.
They are made for the wing bolt that have a 10 mm diameter. This includes the wing extension bolt of all Arcus, all Duo Discus, the Nimbus-3, -3D, -4 and -4D, the Janus, the Discus-b, the Discus-2a and -2b and the Ventus c. It is also the case for the winglet bolt of the Discus, the Standard Cirrus, the Ventus-2a and the Ventus-2b.
These washers internal diameter is 9,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
They are sold in a kit of 4.
from 1 € 6.14 incl. 19% VAT
€ 5.16 -
Landing gear door rubber spring
This elastic maintains the landing gear doors of the double seater. Its diameter is 5 mm.
You can order it by the meter.
from 1 € 1.02 incl. 19% VAT
€ 0.86 -
Tube 3.00/4.00-4 (260x85)
This tube is used for the the 3" front wheel of the double seaters and the single seater 4" main wheel.
Carefull, the valve is only 32 mm long.
from 1 € 19.39 incl. 19% VAT
€ 16.29 -
Ring buffer for SOLO 2350
SOLO Silent block bush, spare part n° 00 94 240
It is 14 mm large and its diameter is 37 mm.
from 1 € 16.30 incl. 19% VAT
€ 13.70 -
Wedekind safety device KIT
Kit to secure l'hotellier connector for gliders with manual control hookups.
It cannot be used for the wing extension.
It is sold by the unit and the EASA Form 1 is included.
from 1 € 95.66 incl. 19% VAT
€ 80.39 -
Spring for turbo arresting cable for Ventus-2cT, -cxT and Discus-2cT
This tension spring is 1,02 x 11 x 72 mm.
It is used for the arresting cables of the Ventus-2cT, -2cxT and Discus-2cT with engine Solo 2350.
from 1 € 5.31 incl. 19% VAT
€ 4.46 -
Tesa foam for horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
Description: Tesa foam 9 x 4 mm, 10 m by roll.
For a simple installation, you can instead buy premade form that can be easily adapted to single seater and double seater.
from 1 € 13.16 incl. 19% VAT
€ 11.06 -
Washer Ø4,3xØ20x1,25 DIN 522 for the fin tank dump valve
This washer is used for the tail ballast dump valve of most of the Schempp-Hirth gliders.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Safety harness Schroth
The seat belts SCHROTH 4-point restraint features the proven and ergonomic SCHROTH rotary actuator. It is light and comfortable, ideal for long flights.
We are selling online only the blue and darkred SCHROTH harness. In addition, Schempp-Hirth gliders can also be equipped with safety harness from Gadringer. If you wish to buy on of these models, please contact the Schempp-Hirth Spare Part.
The harnesses are designed for Schempp-Hirth aircraft.
from 1 € 589.05 incl. 19% VAT
€ 495.00from 1 € 589.05 incl. 19% VAT
€ 495.00from 1 € 589.05 incl. 19% VAT
€ 495.00 -
Lock nut M6 TRELOC, DIN 439 galvanized
from 1 € 0.38 incl. 19% VAT
€ 0.32 -
Landing gear door spring
The tension spring Z-109AI is used for the single seater landing gear doors.
Its dimensions are 77 x 11 x 11 mm
from 1 € 2.59 incl. 19% VAT
€ 2.18 -
Limit switch IX02 0815
This proximity switch (ref IX02 0815) is used for the automatic propeller brake in the Arcus M.
It is not addapted to the Arcus M edition 2020.
This position sensor is sold as a unit (you might need two of them) and the FUT plug is included.
from 1 € 163.33 incl. 19% VAT
€ 137.25 -
Decompression retraction sheet, for SOLO 2350
This part is 148 x 20 x 20 mm.
It is used for all Duo Discus T and Arcus T. It is also used in association with the turbo pylon of the single seater designed in 2000. The Discus-2T (SN>40), the Discus-2cT (SN>35) and the Ventus-2cT (SN>184) have been produced with the new pylon and this decompression retraction sheet while older models might have been modified. The latest Nimbus-4DT are also usin this part. The older retraction sheet looks different, so look carefully at the picture. You can find the older model here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 39.03 incl. 19% VAT
€ 32.80 -
Safety springs for L'Hotellier
Pair of safety springs to secure l'hotellier connectors for gliders with manual control hookups.
The EASA Form 1 is included when needed.
from 1 € 11.90 incl. 19% VAT
€ 10.00 -
Washer M06 galvanized, DIN 125 / ISO 7090 Form B
Washer M06 galvanized, DIN 125 / ISO 7090 Form Bfrom 1 € 0.24 incl. 19% VAT
€ 0.20 -
Single seater horiz. tailplane sealing for all Discus-2, Ventus-2 and the Ventus-3 performance
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 94,98 x 370,00 mm. It is designed for the Discus, Ventus-2c and Ventus-3 Performance. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself using a Tesa Foam roll.
from 1 € 16.77 incl. 19% VAT
€ 14.09 -
Back canopy hinge for Arcus, Duo Discus XL and Nimbus-4DL
This hinge is made of aluminium. It is different than the front hinge made of carbon fiber.
from 1 € 31.80 incl. 19% VAT
€ 26.72 -
Horizontal tailplane mounting tool with extra pin for wingtip mounting
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip.from 1 € 23.78 incl. 19% VAT
€ 19.98 -
Cup washer for the seat pan
These cup washers are used for the bucket seat.
It is size M6 and its dimensions are 13 x 13 x 3 mm.
Tip: For a nicer finish, use these M6 washers with M5 screws (See suggested products).
from 1 € 0.26 incl. 19% VAT
€ 0.22 -
spherical bearing GL 18
This spherical bearing is adapted for 18mm diameter pin of the double seaters.
The internal diameter is 18 mm and the part is 32x32x14 mm.
from 1 € 17.06 incl. 19% VAT
€ 14.34 -
Landing gear retraction lever
This is part, with the fork, of the landing gear retraction system of the Discus, Discus-2, Ventus and Ventus-2 (except for the Ventus-2cxa and for all the fuselages "a"). It is also used for the Nimbus-2, -3 and -4 single seater and for the mini-Nimbus.
This mechanism also requires a steel bushing and an axle which are sold separately.
from 1 € 236.57 incl. 19% VAT
€ 198.80 -
Fuel filters for Ventus-3M
These filters (reference 6064-0A / 0 450 905 401 and E230204) are used for the fuel system of the Ventus-3M.from 1 € 114.49 incl. 19% VAT
€ 96.21 -
V-belt for Arcus M SOLO 2625-02i
This item is 1 set of 5 pieces.
SOLO spare-part n° 00 57 224
from 1 € 273.51 incl. 19% VAT
€ 229.84 -
Rod end bearing KA-6-DC2, M8x50
Rod end bearing with a KA-6-DC2 head (askubal) and M8 x 50 length body.
Other rod end bearings are used in our gliders. If you are not sure which one you need. Please contact the Spare Part team.
from 1 € 11.59 incl. 19% VAT
€ 9.74 -
Double seater horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 98,80 x 435,00 mm. It is designed for the Duo Discus and the Arcus horizontal tailplanes. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself from a Tesa Foam roll.
from 1 € 15.51 incl. 19% VAT
€ 13.03 -
Canopy hinge for Discus, Discus-2, Ventus, Ventus-2, Ventus-3 Sport, Duo Discus, Duo Discus X and Nimbus-4D
This hinge is in carbon fiber.
Note: The rear hinge can be different. To order it, please contact Schempp-Hirth spare part.
from 1 € 27.95 incl. 19% VAT
€ 23.49 -
Horizontal tailplane mounting tool, with Ventus-3 extras.
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip and an extra tool for the ballast plugs.from 1 € 71.39 incl. 19% VAT
€ 59.99 -
Leg springs for water dump system for Arcus, Duo Discus XL and Ventus-2cx
This pair of leg springs is used for the Arcus, Duo Discus xL and Ventus-2cx.
Each spring is 101,5 mm long and 21 mm large.
from 1 € 14.04 incl. 19% VAT
€ 11.80 -
Spherical bearing GL 14
This spherical bearing is adapted for 14mm diameter pin of the single seaters.
The internal diameter is 14 mm and the part is 25x25x8-11 mm.
from 1 € 28.56 incl. 19% VAT
€ 24.00 -
Landing gear retraction lever, steel bushing
This is part of the landing gear retraction system of all the single seater except for the Cirrus. It is also used for the Janus, Nimbus-3D, Nimbus-4D and the Duo Discus (except DDx and DDxL).
It is 108 mm long and its diameter is 12 mm.
This mechanism also requires a main lever and an axle which are sold separately. We are selling online only the main lever used for the amajoity of the single seater. For the other one, please contact us.
from 1 € 21.69 incl. 19% VAT
€ 18.23 -
Tooth belt for Ventus-2cM
This toothed belt is 2400 mm and is adapted for the Ventus-2cM pylon with a Solo 2625-01 engine.from 1 € 691.66 incl. 19% VAT
€ 581.23 -
Fuel hose
This hose NW 4,8x1,6 mm is transparent and it is use for the Fuel sytem.
It is sold my the meter.
from 1 € 19.63 incl. 19% VAT
€ 16.50
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.