-
Tube 5.00-5 (and 6.00), TR87
This tube fits 5.00 and 6.00 tyres.
Its short valve is adapted for almost all single seater with a 5" wheel (except the one equipped with TOST drum brakes like the Kobold 5"). It is also used for the double seaters equipped with a TOST Penta wheel.
You can find the tube 5.00-5, TR67, with a long valve, in the suggested products.
from 1 € 159.34 incl. 19% VAT
€ 133.90 -
Cooling water gasket for the cylinder head of SOLO 2625
This sealing is used for the cooling system on the cylinder head of all SOLO 2625 engines.
It is 51 x 32 x 1,5 mm.
Older 2625 engines need another type of filter. If the filter you want to replace doesn't look like that one and is not in metal, contact Schempp-Hirth spare-part service.
from 1 € 8.37 incl. 19% VAT
€ 7.03 -
Thimble 2,5 mm galvanized
Thimble 2,5 mm galvanized.
It is 27 x 15 x 5 mm.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Turbulator tape 0,85x10 (per meter)
This turbulator band (or Noppenband) is 10 mm large. The dimples are 0,85 mm high and they are distanced by 10 mm.
This model is mainly used for the Ventus-3. Look at your sealing instructions for more information.
It is sold by the meter.
from 1 € 6.09 incl. 19% VAT
€ 5.12 -
Self lock nut M6-8 and M8-8
Safety nut, DIN 985 galvanized
Availabe in thread size M6 or M8.
from 1 € 0.24 incl. 19% VAT
€ 0.20from 1 € 2.38 incl. 19% VAT
€ 2.00from 1 € 0.24 incl. 19% VAT
€ 0.20from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Gasket exhaust 1,5mm, for SOLO 2350
SOLO Silent block bush, spare part n° 20 61 395
from 1 € 7.75 incl. 19% VAT
€ 6.51 -
fuelling hose, assembled, all models
This hoses are assembled with a filter and the connections to refuel your glider.
from 1 € 214.47 incl. 19% VAT
€ 180.23 -
Tailwheel axle
This axle is adapted to the most used Schempp-Hirth tailwheels: the original 200x50 with or without led.
It does not fit the steerable tail wheel of the Arcus M and the Ventus-3M. For these gliders, you must use the reference B40-2946.
It is 98 mm long and 12 mm in diameter.
It is sold with the safety ring-spring (L01-0663).
A washer, that can be necessary on some gliders, is sold as an option.
from 1 € 51.56 incl. 19% VAT
€ 43.33 -
Pilot stick handle, 19,3 mm
This pilot stick handle is made by Air Ergo Leki for the Schempp-Hirth 19,3 mm diameter control sticks.
3 adaptors are provided for the folowing settings: No SC, SC switch or SC button.
from 1 € 60.73 incl. 19% VAT
€ 51.03 -
Polyflex-hose Type 2010N for Duo Discus xL Brakes (Magura system)
This hose is 2200 mm long.
It is used for the Duo Discus x und xL as well as the first Arcus which are using the 5" Classic wheels from TOST with a Magura cylinder brake.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
from 1 € 23.82 incl. 19% VAT
€ 20.02 -
Tyre 5" thin (336x115) 10pr
This tire (Tost p/n 065221 ) is a special 5" made by TOST AERO for the Discus-2b, -2c, the Ventus-2c and the Ventus-3 . It is a bit smaller than a classic 5" so the tyre is not touching the landing gear box.
from 1 € 316.16 incl. 19% VAT
€ 265.68 -
Karcoma fuel filter
This fuel filter Karcoma 99.106/8-100 is used for the refuelling and fuel hoses.
It is 80 mm long and its diameter is 30 mm.
from 1 € 3.83 incl. 19% VAT
€ 3.22 -
Thimble 3,5 mm galvanized
Thimble 3,5 mm galvanized.
It is 32 x 17 x 6 mm.
from 1 € 0.94 incl. 19% VAT
€ 0.79 -
Canopy window rail
The canopy window rail device including screws. The screws are in metal but as an option, you can order it in plastic.
These rails are made for the Mecaplex canopy. It is the only model currently available, but you may need to customise it a little if you have a Weis canopy.
from 1 € 49.98 incl. 19% VAT
€ 42.00from 1 € 55.09 incl. 19% VAT
€ 46.29from 1 € 55.09 incl. 19% VAT
€ 46.29from 1 € 110.17 incl. 19% VAT
€ 92.58 -
O-Ring Ø68 x Ø07,00mm NBR 70 for the propeller of the single seater with turbo Solo 2350
from 1 € 4.08 incl. 19% VAT
€ 3.43 -
Rain protection cap for spark plug
This piece is used to protect the spark plug from the rain in the SOLO 2350 engine.
SOLO spare part n° 00 84 203
from 1 € 4.01 incl. 19% VAT
€ 3.37 -
RPM sensor, with pins, for Arcus M
This RPM sensor with cables and pins is used for the Solo 2625-02i.
from 1 € 399.16 incl. 19% VAT
€ 335.43 -
Horizontal tailplane fitting, rear part
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders.
Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
To change this part you may also need screws and washers that can be added as an option.
from 1 € 428.52 incl. 19% VAT
€ 360.10 -
Tailwheel tyre 200x50
This 6PR tire from TOST AERO is used for all the 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 37.37 incl. 19% VAT
€ 31.40 -
Pilot stick bag for single seaters and double seater rear seat
This fabric bag is placed around the pilot stick of all single seater and at the rear seat of the double seaters. This model is not adapted for the Quintus, the Arcus edition 2020 and the Ventus-3. You can find the model for the front seat of the double seater in the suggested products.
It is a safety feature, preventing things going inside the controls. If it get old or damaged you can replace it.
It is sold without frame.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Cockpit symbol
These pictograms can be used in Discus-2 and Duo Discus.from 1 € 33.32 incl. 19% VAT
€ 28.00 -
Water filler cap
This sealing cap is for the Ventus-2, Discus-2, Duo Discus and the first Arcus.
The cap diameter is 36 mm and it is 5 mm high with a M6 hole on the side (B40-1226). Older gliders can have the same cap but the system may be different.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 52.32 incl. 19% VAT
€ 43.97 -
Landing gear door spring for Arcus and Duo Discus XL
from 1 € 87.85 incl. 19% VAT
€ 73.82 -
Tyre 15X6.00-5 (380x150) for the double seater
This 5" tire (380x150/15X6.00-5, RB 06120 TT) is used for the double seaters.
from 1 € 471.24 incl. 19% VAT
€ 396.00 -
O-ring Ø90 x Ø7mm NBR70 for Duo Discus T, Duo Discus XLT and Arcus T propeller
from 1 € 4.39 incl. 19% VAT
€ 3.69 -
Steel bushing for rudder cable
This steel bushing, 8x1x7 mm without hole, is used for rudder cables.
They are sold individually.
The screw (05018 LN 9037, Ref L01-0005), washer (M05 DIN 125, Ref L01-0228) and lock nut (M 5-8, DIN 985 vz, Ref L01-0703) are provided.
The EASA form one is included.
from 1 € 8.45 incl. 19% VAT
€ 7.10 -
Schnorr-safety washer
Safety washers Form S available in M6 and M8.
These washers are used, among other things, to secure the rear part of the horizontal tail fitting and the elevator drive U-bracket.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Special screw for Arcus M and Ventus-3M tailwheel axle
This M8 screw is design for the steering tail wheel axle of the Arcus-M and the Ventus-3M.
from 1 € 17.87 incl. 19% VAT
€ 15.02 -
fix-o-moll "V" profile sealing, for the vertical fin rudder sealing
A roll contains 10 m of sealing.from 1 € 19.88 incl. 19% VAT
€ 16.71 -
Pilot stick bag for double seater front seat
This fabric bag is placed around the pilot stick of the front seat of the double seaters. This model is not adapted for the Arcus edition 2020.
It is a safety feature, preventing things going inside the controls. If it get old or damaged you can replace it.
It is sold without frame.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Elektret gooseneck microphone
This microphone is adapted to radio with electret input.
Mounting kit is included in the price.
from 1 € 282.07 incl. 19% VAT
€ 237.03 -
Water filler cap top
This plug is 5 mm high and its diameter is 36 mm. It fit all the Ventus 2, Discus 2, Nimbus 3, Duo Discus and the first Arcus.
Dependant on the glider, older Ventus and Discus can need this model or a 35 mm diameter sealing cap that is 7,5 mm high. Please look at your current model to order the same. If you need the thick sealing cap, you can order it through Schempp-Hirth spare-part form.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 9.64 incl. 19% VAT
€ 8.10 -
Landing gear door hinge for Arcus, Duo Discus and Nimbus-4
These hinges are used to fix the landing gear door of the Arcus, Nimbus-4 and Duo Discus.
The countersunk screws (fuselage side) and countersunk-head rivet and their washers (door side) can be ordered as an option.
from 1 € 39.41 incl. 19% VAT
€ 33.12 -
Tyre 4.00-4 Tost AERO 8 pr
This tire (Tost p/n 064491) is used for the the 4" wheel of the single seater (before the Ventus-2c and the Discus-2b).
from 1 € 112.10 incl. 19% VAT
€ 94.20 -
Distance gummi for propeller blade on the Duo Discus T, Duo Discus XLT and Arcus T
Two models exist, with or without a base, please choose the model who is already on your glider.
They are 10 mm high.
They are sold individually but you will need 5 of them for your glider.
from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 14.03 incl. 19% VAT
€ 11.79 -
Bowden cable 5,3x4,4x3,0 mm
This bowden cable is 5,3 x 4,4 x 3,0 mm. It can also be referred to as 5.51.0000.022.
It is sold by the meter and includes 2 cable end caps.
This cable is often used for the wheel brake systems. Please refer to your maintenance manual for the type of cable you need and how to make the connections.
from 1 € 6.27 incl. 19% VAT
€ 5.27 -
Roll pin for aileron
These roll pins are used to secure the aileron.
Dimension: 2 x 10 mm
DIN 1481 / ISO 8752
from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Tailwheel axle for Arcus M and Ventus-3M
This axle is design for the steering tail wheel of the Arcus-M and the Ventus-3M.
from 1 € 22.54 incl. 19% VAT
€ 18.94 -
Horiz. Tailplane Pin, Kit.
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. The kit provides all the necessary parts to change 1 pin.
from 1 € 98.19 incl. 19% VAT
€ 82.51 -
Bellows V6-905 for the fin tank
This rubber boot ensures the sealing of the tail ballast of most of the Schempp-Hirth gliders.
It is advisable to replace it every 2-3 years to avoid water leaks.Its dimensions are 72 x 38 mm.
from 1 € 18.31 incl. 19% VAT
€ 15.39 -
DZUS-quick fastener pin
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 5.05 incl. 19% VAT
€ 4.24 -
Temperature gauge
The temperature-indicator TF-00-059 is compact and readable. It temperatur captor can easily reach the front ventilation with its 125 cm cable.
This thermometer is mandatory for all the Schempp-Hirth gliders with water ballast.
from 1 € 37.90 incl. 19% VAT
€ 31.85 -
Landing gear door hinge for single seater
These hinges are used to fix the landing gear door of almost all single seater.
Their dimensions are: 30 x 30 x 0,8 mm
The countersunk screws (fuselage side) and countersunk-head rivet with their washers (door side) can be ordered as an option.
from 1 € 2.13 incl. 19% VAT
€ 1.79 -
Tyre 2.80/2.50-4 for double seater nose wheel
This 2.80/2.50-4 tire is used for the front wheel of the Janus, Duo Discus, and Arcus.
Previously, a 3" tire (D 3.00-4 IND IC35 4PR) was used, but that model has been discontinued. This tire serves as a suitable replacement.
from 1 € 190.40 incl. 19% VAT
€ 160.00 -
Spark plug connector 5k Ohm - Discontinued
This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.
SOLO spare part n° 23 00 701 V1
These old models are no longer available and it is replaced by a new reference.
from 1 € 0.00 incl. 19% VAT
€ 0.00 -
Embout L'Hotellier RMZ 9. 41.2.2.2
L'hotellier connector for gliders with manual control hookups.
It is sold by the unit.
from 1 € 481.12 incl. 19% VAT
€ 404.30 -
Air filter for SOLO 2625-01 and 2625-02
This air filter RU 2690 (Solo ref: 25 00 580) is used for the Solo 2625-01 and 2625-02.
from 1 € 59.67 incl. 19% VAT
€ 50.14 -
Rubber washer 19x3 mm for the fin tank dump valve
This rubber washer ensures the sealing of the tail ballast of most of the Schempp-Hirth gliders.
It is advisable to replace it every 4-6 years to avoid water leaks.from 1 € 0.82 incl. 19% VAT
€ 0.69 -
DZUS S-washer
This washer is used with the DZUS-quick fastener pin. It is size 6, its diameter is 12 mm and it is made of plastic.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Rear-view mirror
from 1 € 83.06 incl. 19% VAT
€ 69.80 -
Shim washer for 10 mm diameter wing bolt
These washers are 14x9,8x0,5 mm.
They are made for the wing bolt that have a 10 mm diameter. This includes the wing extension bolt of all Arcus, all Duo Discus, the Nimbus-3, -3D, -4 and -4D, the Janus, the Discus-b, the Discus-2a and -2b and the Ventus c. It is also the case for the winglet bolt of the Discus, the Standard Cirrus, the Ventus-2a and the Ventus-2b.
These washers internal diameter is 9,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
They are sold in a kit of 4.
from 1 € 6.14 incl. 19% VAT
€ 5.16
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.