-
Knurled nut M10 for trim weight
This knurled nut M10 DIN 467 is used to secure the cockpit weights of all the Ventus-3, the Arcus and some Duo Discus (xL).
It is sold with the safety pin (L01-0142)
from 1 € 6.31 incl. 19% VAT
€ 5.30 -
Set of gaskets for main brake cylinder, Form 6, 7
This set of gasket can replace the on the main brake cylinder form 6 or 7. It is very likely that this type of cylinder is installed in the Duo Discus (but not in the x or xL), some Nimbus-4(D), as well as in some retrofitted Nimbus and Janus.
It do not work with the rectangular brake cylinder installed on some gliders (Ref: B40-1014).
from 1 € 37.83 incl. 19% VAT
€ 31.79 -
O-ring Ø32 x Ø3 for water dump system of the Duo Discus xL, the Arcus, the Discus-2c and the Ventus-2cx
This O-ring Ø32 x Ø3 is used for the water dump valve of several gliders:
- the Duo Discus x and xL,
- all the Arcus,
- some Discus-2c (the system has been upgraded in 2005),
- the Ventus-2cx and the Ventus-2cxa for the inner wing dump system not the outer wing.
from 1 € 0.55 incl. 19% VAT
€ 0.46 -
Fokker-safety pin for trim weights
This safety pin (or Fokker pin) is 1,5 mm and it is used to secure the cockpit weight in Schempp-Hirth gliders.from 1 € 1.34 incl. 19% VAT
€ 1.13 -
Wing nut for trim weights
This butterfly nut is M10 (DIN 315) and it is used to secure the cockpit weights in all Schempp-Hirth single seaters (except the Ventus-3), the Nimbus, the Janus and some of the first Duo Discus.from 1 € 5.83 incl. 19% VAT
€ 4.90 -
from 1 € 17.26 incl. 19% VAT
€ 14.50 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69 -
Brake pull cable for single seaters with magura type disc
This system is used for the Ventus-2 and the Discus-2 which are using the 5" Cleveland wheel from TOST, with a “Magura” cylinder brake.
The brake cable measures 555 mm in length and features a 6 x 10 mm nipple.
from 1 € 13.96 incl. 19% VAT
€ 11.73 -
Kit for brake pull cable for single seater with drum brake
This comprehensive kit ensures compatibility with all single-seater gliders equipped with drum brakes and provides the necessary components for a smooth brake cable replacement.
The cable comes with a standard 5.5 mm nipple, which fits most modern gliders that have a 6.2 mm handle hole. For older models or those with larger handle holes, an additional nipple is included, suitable for handles with an 8.5 mm hole.
The kit includes:
- 1600 mm of 2 mm cable with a 5.5 x 10 mm nipple
- 1 x Nicopress oval sleeve (1.5-2 mm, NT281C-A)
- 1 x 2 mm thimble
- 1 x Nipple No. 33A
- 1 x Nipple support No. 21A (8 x 9 mm)
from 1 € 68.92 incl. 19% VAT
€ 57.92
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.