-
Steerable tailwheel TOST Mini 150x30
This tailwheel Max "X/S" is designed for the Ventus-2cM and it is available as an option for the Ventus-3 Sport. It is 150x30 mm and filled with foam.
This model it isn't adapted to the Ventus_2cM carbon fork so if the wheel currently in place is less than 150 mm, please contact Schempp-Hirth spare-part service.
from 1 € 395.79 incl. 19% VAT
€ 332.60 -
The classic Schempp-Hirth tailwheel,
200x50This is the original Schempp-Hirth tailwheel. It is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance.
Two models are available. This one does not contain leid and weights 0,930 kg. The other model is golden-coloured and can weight 2,6 or 3,6 kg. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 224.99 incl. 19% VAT
€ 189.07 -
Distance washer for tailwheel
This washer is 16 x 2 x 4,5 mm and it is used for the tail wheel
from 1 € 17.62 incl. 19% VAT
€ 14.81 -
Horizontal tailplane fitting, snap lock
This item is part of the stabilizer fixation of all the modern Schempp-Hirth gliders.
It is possible to replace or change it for a bigger pin diameter to compensate the ageing of the parts on the stabilizer.
This item is delivered with 4 allen screw M06x30 - 8.8, DIN 912 / ISO 4762 galvanized (L01-0119) and 4 Schnorr-safety washer M6 (L01-0378).
from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84 -
Perspex disc 78,3 mm with 5 mm hole
This perspex disc is made for Arcus, all Duo Discus, Ventus-3, Discus-2b, -2c, Discus b and cs.
However, some gliders have more than one perspex disc and they can be different. Please look at the diameter and model you need.
Its diameter is 78,3 mm and the central hole is 5 mm.
from 1 € 3.65 incl. 19% VAT
€ 3.07 -
Perspex disc 53,5 mm with 5 mm hole
This perspex disc is made for the Ventus-2a.
Its diameter is 53,5 mm and the central hole is 5 mm.
from 1 € 16.79 incl. 19% VAT
€ 14.11 -
Pneumatic tension spring 450 N for Ins. Panel for the Duo Discus xL and the Arcus
This gas strut is 450 N and 178 mm long.
It is used for the foldable instrument panel of Arcus and Duo Discus XL.
from 1 € 23.73 incl. 19% VAT
€ 19.94 -
Pneumatic tension spring 350 N for Ins. Panel of the Discus-2b,-2c and Ventus-2c
This 350 N gas strut is 293 mm long.
It is used for the foldable instrument panel of the Ventus-2c, Ventus-2bx, Discus-2a, Discus-2b and Discus-2c.
from 1 € 30.37 incl. 19% VAT
€ 25.52 -
Pneumatic tension spring 300 N for instr. panel of the Discus b, Discus-c, Ventus c, Ventus-2b
This 300 N gas strut is 313 mm long.
It is used for the foldable instr. panel of the Discus-2c FES, Discus b, Ventus c and Ventus-2b.
from 1 € 27.73 incl. 19% VAT
€ 23.30 -
Bellow V6-269 for water ballast control rod
This rubber boot is surrounding the water ballast control rod to avoid the water leaking through. It is used in several Schempp-Hirth gliders including the Nimbus-2, Ventus, Ventus-2c, Discus-2c, Duo Discus and the Arcus.
It is 125 x 22 x 22 mm with a 7 mm and a 16 mm opening.
Over the years, other bellows and different combinations have been used. You can find them underneath this description, in the "suggested products", if you want to compare them with the model that you wish to replace.
from 1 € 21.74 incl. 19% VAT
€ 18.27 -
Flap latch-in element for Ventus c
This part is used for the notching of the flaps of the Ventus c.
It is 135 mm long and the screw holes are spaced 50 and 68 mm apart respectively. The space between the first and the last step is 90 mm. Please look carefully at the drawing to make sure that it is really the part you need.
from 1 € 105.15 incl. 19% VAT
€ 88.36 -
Flap latch-in element for Ventus-2b
This part is used for the notching of the flaps of the Ventus-2b.
It is 135 mm long and the screw holes are spaced 50 and 69 mm apart respectively.
from 1 € 109.37 incl. 19% VAT
€ 91.91 -
Tailwheel tube 200x50 with 90° valve
This tube is for all 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 10.60 incl. 19% VAT
€ 8.91 -
Landing gear guide plate for singel seater
This plate in grey PVC is used as a guide for all single-seater landing gear (except for the Ventus-3).
Its length is 220 x 24 mm and there is no hole. Adjust it to your glider.
from 1 € 6.47 incl. 19% VAT
€ 5.44 -
Oxygen-bottle neck-holder
This oxygen bottle support is suitable for a majority of Schempp-Hirth gliders.
Please choose the diameter of your oxygen bottle. If your bottle has a diameter that is not in the list, please contact Schempp-Hirth spare part.
Please note that for some bottle (like the "Montain High"), you will need an extender to shift the pressure gauge away from the bottle neck.
from 1 € 214.20 incl. 19% VAT
€ 180.00from 1 € 214.20 incl. 19% VAT
€ 180.00 -
Turbulator tape 0,8x5 for almost all gliders (Roll)
This turbulator band (or Noppenband) is 10 mm large and self-adhesive . The dimples are 0,8 mm high and they are distanced by 5 mm.
It is very often used on Schempp-Hirth glider but look at your sealing instructions as some gliders, like the Arcus and the Ventus 3, are using a different turbulator tapes.
The roll is 10 metres long.
from 1 € 35.99 incl. 19% VAT
€ 30.24 -
Airbrake drive funnel
This drive funnel is used on almost all Schempp-Hirth gliders except the Nimbus-4 and the Ventus-3.
Two lock nuts M 6-8, DIN 985 and a lock nut M6 TRELOC, DIN 439 are included. However, your glider has a specific set of distance washer that are not provided. Please before disassemble the funnel make sure you know which washer go where.
On the Ventus-2 and Discus-2c, you may also need a set of screws that can be baught as an option.
from 1 € 370.99 incl. 19% VAT
€ 311.76 -
Main brake cylinder for Ventus-2 and Discus-2 using the disc brakes type Magura (Option)
This system is used for the Ventus-2 and the Discus-2 which are using the 5" Cleveland wheel from TOST and with a “Magura” cylinder brake.from 1 € 375.87 incl. 19% VAT
€ 315.86 -
Main wheel axle
This is the axle for the main landing gear of almost all Discus, Discus-2, Ventus-2 and Ventus-3.
It is 215 mm long, including a M12x1,5 head (4 mm long) and a M12 screw thread (12 mm long).
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with carbon fiber undercarriage need another axle . If you are not sure, measure the axle that is currently used or contact Schempp-Hirth spare part.
You may also want to buy the 8 mm M12x1,5 castle nut which is used to secured the axle (See suggested products).
from 1 € 70.50 incl. 19% VAT
€ 59.24 -
Ignition coil for Solo 2625 type "i" from PVL
The ignition box from PVL is used for the Solo 2625-01i and 2625-02i but not for the other version. The Solo 2625-01 and 2625-02 need the ignition coil from Ducati.from 1 € 207.30 incl. 19% VAT
€ 174.20 -
Nicopress-Stop sleeve 1,5-1,7mm
Nicopress-Stop sleeve 1,5-1,7mm, NTS011C (round).
It is 5 x 5 x 5 mm.from 1 € 0.48 incl. 19% VAT
€ 0.40
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.