-
Double seater horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 98,80 x 435,00 mm. It is designed for the Duo Discus and the Arcus horizontal tailplanes. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself from a Tesa Foam roll.
from 1 € 15.51 incl. 19% VAT
€ 13.03 -
Canopy hinge for Discus, Discus-2, Ventus, Ventus-2, Ventus-3 Sport, Duo Discus, Duo Discus X and Nimbus-4D
This hinge is in carbon fiber.
Note: The rear hinge can be different. To order it, please contact Schempp-Hirth spare part.
from 1 € 27.95 incl. 19% VAT
€ 23.49 -
Horizontal tailplane mounting tool, with Ventus-3 extras.
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip and an extra tool for the ballast plugs.from 1 € 71.39 incl. 19% VAT
€ 59.99 -
Leg springs for water dump system for Arcus, Duo Discus XL and Ventus-2cx
This pair of leg springs is used for the Arcus, Duo Discus xL and Ventus-2cx.
Each spring is 101,5 mm long and 21 mm large.
from 1 € 14.04 incl. 19% VAT
€ 11.80 -
Spherical bearing GL 14
This spherical bearing is adapted for 14mm diameter pin of the single seaters.
The internal diameter is 14 mm and the part is 25x25x8-11 mm.
from 1 € 28.56 incl. 19% VAT
€ 24.00 -
Landing gear retraction lever, steel bushing
This is part of the landing gear retraction system of all the single seater except for the Cirrus. It is also used for the Janus, Nimbus-3D, Nimbus-4D and the Duo Discus (except DDx and DDxL).
It is 108 mm long and its diameter is 12 mm.
This mechanism also requires a main lever and an axle which are sold separately. We are selling online only the main lever used for the amajoity of the single seater. For the other one, please contact us.
from 1 € 21.69 incl. 19% VAT
€ 18.23 -
Tooth belt for Ventus-2cM
This toothed belt is 2400 mm and is adapted for the Ventus-2cM pylon with a Solo 2625-01 engine.from 1 € 691.66 incl. 19% VAT
€ 581.23 -
Fuel hose
This hose NW 4,8x1,6 mm is transparent and it is use for the Fuel sytem.
It is sold my the meter.
from 1 € 19.63 incl. 19% VAT
€ 16.50 -
Safety ring-spring steel, DIN471, size 12
This safety ring-spring steel, DIN471, size 12 is used to secure the tailwheel axle of, almost, all Schempp-Hirth gliders.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Automatic control connection for single seaters (exc. Ventus-3)
This bell crank is used on Discus b, Discus c, Discus-2a, -2b, -2c, Ventus b, Ventus c and Ventus-2a, -2b, -2c.
You may need to change them according to the TN 349-43.
You can buy the screws and bolts needed to change the part as an option. This option is currently un available but will be back within a few weeks.
from 1 € 373.60 incl. 19% VAT
€ 313.95 -
Bellow V6-0714 for the elevator drive
This rubber boot surrounds the upper part of the elevator rope.
It is 70 mm long and 75 mm large and the diameters of the openings are 65 and 18 mm.
from 1 € 38.48 incl. 19% VAT
€ 32.34 -
Blue handgrip for airbrake handle
This handle is made of plastic. It is 75 mm long and its diameter is 25 mm.
It is used for the airbrake handle of almost all Schempp-Hirth gliders.
from 1 € 0.74 incl. 19% VAT
€ 0.62 -
Wing extension mounting tool
This tool allows you to assemble Discus-2c, Ventus-2c and Ventus-3 wing extensions.
from 1 € 25.38 incl. 19% VAT
€ 21.33 -
Springs for wingtip aileron of the Duo Discus and the Ventus-2
This pair of springs is used for the outer wing panel aileron of the Duo Discus and Ventus-2. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 1,5 mm and it makes 1 full coiled.
On the Duo Discus xL, these springs are 2 mm and is making 2 full coiled. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 25.81 incl. 19% VAT
€ 21.69 -
Wing attachment bolt for Ventus-2c and Discus-2c, back
The visible part of the peg is 70,5 mm long with a 14 mm diameter. The internal part is 35 mm long, with a 40 mm diameter.
It is used on the back part of the Discus-2c and Ventus-2c wing roots.
from 1 € 93.58 incl. 19% VAT
€ 78.64 -
Bellow V6-0052 for waterballasts
This flexible rubber boot is 63 x 39x 39 mm with a 10 mm and a 25 mm opening.
It is surrounding the ballast rod on the wing root of the Discus b, Ventus-2 (SN < 561), Discus-2a and Discus-2b (SN< 234) which have been produced before June 2009. However, some of these gliders might have been retrofitted with the newer system. You can see on the suggested product the other bellow.
It is used for the ballast system of the Nimbus-3, -3D, -4 and -4D. For the Nimbus, the bellow may need to be adapted by cutting the larger end.
It is also used as a sealing around the brake line when crossing the wheel box in all single seaters.
from 1 € 20.15 incl. 19% VAT
€ 16.93 -
Landing gear retraction lever, quick release axle
This is part of the landing gear retraction system of all the single seater except for the Cirrus.
It is 189 mm long with a size 10 thread on one side and a 14 mm ring on the other.
This mechanism also requires a the main lever and a steel bushing which are sold separately. We are selling online, only the main lever used for the a majority of the single seater. For the other one, please contact us.
from 1 € 39.09 incl. 19% VAT
€ 32.85 -
Kit for 5-year-special inspection, SOLO turbo 2350 (SN before 339)
In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...
If your engine is after SN 338, please use the kit for engine Solo 2350 (SN>338).
This kit is not adapted for the SOLO 2350c and 2350d.
from 1 € 230.32 incl. 19% VAT
€ 193.55 -
Kit pylon arresting wire for Ventus- 2cM, Ventus-3M, Arcus M, Nimbus-4M and -4DM
The kit contains the cable (diameter 3,2 mm), 2 nicopress-oval sleeves, 2 thimbles and some silicone tube. One side is already assembled.
It can be use for the Ventus-2cM, Ventus-3M, the Nimbus-4M and -4DM and the Arcus M.
Please refer to the maintenance manual for the installation.
from 1 € 114.66 incl. 19% VAT
€ 96.35 -
Washer for spar bridge
This washer DIN 9021 M8, 8,4 bright countersunk is mainly use to fix the O2-bottle holder when the holder is over the spar bridge.
from 1 € 6.84 incl. 19% VAT
€ 5.75 -
Fin tank valve for all single seaters (exc. Ventus-3)
This is the complete tank dump valve assembly. It is used for all single seaters except for the Ventus-3.
Arcus and Duo Discus xL have other model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our sparepart team.
from 1 € 213.13 incl. 19% VAT
€ 179.10
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.