-
Wingtip complet wheel, Lindner System, for Arcus
This wingtip wheel is designed for the Arcus. It is aerodynamic but high enough and resistant to drive on the ground.
The item is 236 x 116 x 69 mm and the screws are 165 mm apart.
It sold by the unit and the screws are provided.
from 1 € 708.64 incl. 19% VAT
€ 595.50 -
Leg spring for water dump system for Mini-Nimbus, Duo Discus, Ventus-2c and Ventus-3
These springs are used for the water dump system on the Mini-Nimbus, Duo Discus, Ventus-2c and Ventus 3.
It is 99,5 mm long and the diameter of the coiled is 15 mm. The steel wire diameter is 1,5 mm.
from 1 € 5.95 incl. 19% VAT
€ 5.00 -
Pneumatic tension spring connecting the flap to the airbrake
This 200N gas strut is in the airbrake box. It connects the airbrake rod to the actuating lever of the trailing edge flap for the Duo Discus X and xL as well as the Nimbus-3D, -4 and -4D.
An older version used a gas spring from the company Hahn, you can use this one instead.
from 1 € 175.92 incl. 19% VAT
€ 147.83 -
Pneumatic tension spring for mini Nimbus airbrakes
This 150N gas strut is used for the Mini-Nimbus airbreaks.
from 1 € 182.71 incl. 19% VAT
€ 153.54 -
PVC adhesive tape 12 mm
This PVC adhesive tape extra fin (known as Tesa 4104), 12 mm, is used to fixe the profiband and to obtain a clean finish on the control sealing. Please refer to the sealing instruction of your glider to order the requiered sealing.
This extra-thin white tape is our new, improved reference used in current production. It offers significantly better durability compared to the previous version and ensures reliable long-term performance.
One roll contains 20 meters
from 1 € 9.52 incl. 19% VAT
€ 8.00 -
Cockpit symbol for Arcus
This label is made for the Arcus (Arcus M SN<216 and Arcus T SN<90).
from 1 € 33.32 incl. 19% VAT
€ 28.00from 1 € 36.54 incl. 19% VAT
€ 30.71from 1 € 33.32 incl. 19% VAT
€ 28.00 -
Flap position symbol for the Arcus
This label is made for the original Arcus.
from 1 € 20.93 incl. 19% VAT
€ 17.59 -
Cockpit symbol for Discus-2c
This label is made for Discus-2cfrom 1 € 28.98 incl. 19% VAT
€ 24.35 -
Cockpit symbol for Ventus-3
This label is made for the Ventus-3.
from 1 € 28.24 incl. 19% VAT
€ 23.73 -
Hexagon screw 06020, LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2 and Discus-2c.from 1 € 1.58 incl. 19% VAT
€ 1.33 -
Hexagon screw 06021,5 , LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2c and Discus-2c.from 1 € 11.80 incl. 19% VAT
€ 9.92 -
Hexagon Screw 06036, LN 9037
This 6k-screw is used for the elevator drive U-bracket.
from 1 € 1.71 incl. 19% VAT
€ 1.44 -
Hexagon Screw M06x18 - 8.8, DIN 933 / ISO 4017
This 6k-Screw is used for the elevator drive U-bracket.from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Allen screw M06x21 - 8.8, DIN 912 galvanized
This screw is mainly used to secure the rear part of the horizontal tail fitting.from 1 € 3.20 incl. 19% VAT
€ 2.69 -
washer 6,4, DIN 9021 / ISO 7093-1 galvanized
This washer is mainly used on the rear part of the horizontal tail fitting.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Elevator U-bracket
This item is part of the elevator control and horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
When you remove the previous U-bracket, keep the screws! If they are not damaged, we advise you to use them again. However, we are providing new lock washers.
If you also need the screws, the reference are: 2x 6k screws 06036 LN 9037 and 4x 6k screws M06x18 - 8.8 DIN933 / ISO 4017 (See suggested products).
from 1 € 288.11 incl. 19% VAT
€ 242.11 -
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
Pneumatic tension spring 250 N for instr. panel
This 250 N gas strut is 222 mm long.
It is used for the foldable instrument panel of the Ventus-2a, Discus-2a and the Ventus-2cxa before the year 2009.
Some Ventus-2cxa before 2009 may have been modified. Please have a close look at the one installed in your glider. If the diameter is 20 mm and it is longer than 23 mm, you need the reference L03-0124. Please contact our spare part team.
from 1 € 46.15 incl. 19% VAT
€ 38.78 -
The "heavy" Schempp-Hirth tailwheel
200x50 with lead
This is the Schempp-Hirth tailwheel, with lead.
This wheel is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance. Thanks to removable lead, it can weigh 2,6 or 3,6 kg.
Another model, without lead, black and weighting 0,930 kg is available. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 683.62 incl. 19% VAT
€ 574.47 -
Flap latch-in element for Ventus-2c, -2cx and -2bx
This part is used for the notching of the flaps of the Ventus-2bx, Ventus-2c and Ventus-2cx.
It is 146 mm long and the screw holes are spaced 50 and 69 mm apart respectively.
from 1 € 89.75 incl. 19% VAT
€ 75.42 -
Steerable tailwheel "Max II" 200x50
This wheel is made by Tost for the tail of the Arcus M, Ventus-3M and the Quintus M.
It is made in two parts, and it is adapted for a 12 mm axle and 200 x 50 tyres and tubes. In aluminium, silver anodized, it weights less than a kilo.
from 1 € 336.06 incl. 19% VAT
€ 282.40
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.