-
Ignition coil for Solo 2625 from Ducati
This ignition box from Ducati is used in the Solo 2625-01 and 2625-02 but not for the "i" version. The Solo 2625-01i and 2625-02i need the ignition coil from PVL.
The cable is included.
from 1 € 598.99 incl. 19% VAT
€ 503.35 -
Nicopress-oval sleeve 1,5-2 mm
Nicopress-oval sleeve 1,5-2 mm, ref : NT281C-A or N° 28-1-C.
It is 10 x 6 x 4 mm.
from 1 € 0.30 incl. 19% VAT
€ 0.25 -
Elevator- front trim knob for Arcus, all Duo Discus and all Nimbus-4D
This is the handle for the trim of the Arcus, Duo Discus XL and Nimbus-4DL.
The roll pins are included.
Please note the pin roll can be bought separatly (see suggested product). If your glider is older than April 2015, you need to use the 2x14 mm roll pins instead of 2x16 mm.
from 1 € 62.25 incl. 19% VAT
€ 52.31 -
Eta fuse for instuments
These fuses are used for instruments.
They are available in 2, 4 and 6,3 A.
from 1 € 13.09 incl. 19% VAT
€ 11.00from 1 € 20.40 incl. 19% VAT
€ 17.14from 1 € 11.33 incl. 19% VAT
€ 9.52 -
Tailwheel tube 200x50 with 90° valve
This tube is for all 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 10.60 incl. 19% VAT
€ 8.91 -
Landing gear guide plate for singel seater
This plate in grey PVC is used as a guide for all single-seater landing gear (except for the Ventus-3).
Its length is 220 x 24 mm and there is no hole. Adjust it to your glider.
from 1 € 6.47 incl. 19% VAT
€ 5.44 -
Oxygen-bottle neck-holder
This oxygen bottle support is suitable for a majority of Schempp-Hirth gliders.
Please choose the diameter of your oxygen bottle. If your bottle has a diameter that is not in the list, please contact Schempp-Hirth spare part.
Please note that for some bottle (like the "Montain High"), you will need an extender to shift the pressure gauge away from the bottle neck.
from 1 € 214.20 incl. 19% VAT
€ 180.00from 1 € 214.20 incl. 19% VAT
€ 180.00 -
Turbulator tape 0,8x5 for almost all gliders (Roll)
This turbulator band (or Noppenband) is 10 mm large and self-adhesive . The dimples are 0,8 mm high and they are distanced by 5 mm.
It is very often used on Schempp-Hirth glider but look at your sealing instructions as some gliders, like the Arcus and the Ventus 3, are using a different turbulator tapes.
The roll is 10 metres long.
from 1 € 35.99 incl. 19% VAT
€ 30.24 -
Airbrake drive funnel
This drive funnel is used on almost all Schempp-Hirth gliders except the Nimbus-4 and the Ventus-3.
Two lock nuts M 6-8, DIN 985 and a lock nut M6 TRELOC, DIN 439 are included. However, your glider has a specific set of distance washer that are not provided. Please before disassemble the funnel make sure you know which washer go where.
On the Ventus-2 and Discus-2c, you may also need a set of screws that can be baught as an option.
from 1 € 370.99 incl. 19% VAT
€ 311.76
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.