Spare parts
-
RPM sensor, with pins, for Arcus M
This RPM sensor with cables and pins is used for the Solo 2625-02i.
from 1 € 399.16 incl. 19% VAT
€ 335.43 -
Horizontal tailplane fitting, rear part
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders.
Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
To change this part you may also need screws and washers that can be added as an option.
from 1 € 428.52 incl. 19% VAT
€ 360.10 -
Tyre 15X6.00-5 (380x150) for the double seater
This 5" tire (380x150/15X6.00-5, RB 06120 TT) is used for the double seaters.
from 1 € 471.24 incl. 19% VAT
€ 396.00 -
Embout L'Hotellier RMZ 9. 41.2.2.2
L'hotellier connector for gliders with manual control hookups.
It is sold by the unit.
from 1 € 481.12 incl. 19% VAT
€ 404.30 -
KIT for fuel hose replacement at the 5-year inspection for Arcus M
This kit contains all the fuel hoses that need to be replaced during the 5 years inspection on the Arcus M.from 1 € 503.85 incl. 19% VAT
€ 423.40 -
Master brake cylinder for the Duo Discus and Nimbus-4D
This Master Cylinder Model 7 is used on the older Duo Discus and Nimbus-4D aircraft equipped with 30-9 brakes.
from 1 € 514.27 incl. 19% VAT
€ 432.16 -
propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
from 1 € 518.49 incl. 19% VAT
€ 435.71 -
Landing gear assembly bolts and bushing kit for Duo Discus
This kit is made to replace the main bushes and bolts on the Duo Discus and Nimbus-4D landing gear.
It is not adapted to Duo Discus xL and Nimbus-4DL.
You can find bellow the detail list of all the parts.
This kit is likely out of stock, but you can use the drawing to order the required part through the form.
from 1 € 551.61 incl. 19% VAT
€ 463.54 -
Battery box for modern double seaters with engine
This battery holders is installed on the rear side of the front pilot seat, close to the aft pilot’s leg area.
The metalic bracket is available in the suggested products section at the bottom of the page.
from 1 € 560.59 incl. 19% VAT
€ 471.08 -
Starter for Solo engine 2625
Solo part: 23 00 781 02
Starter from Denso for Solo engine 2625.
from 1 € 562.35 incl. 19% VAT
€ 472.56 -
V-belt for Nimbus-4M and Nimbus-4DM
This 2520 Poly Chain GT2 toothed belt is designed for the pylon of the Nimbus-4M and Nimbus-4DM equipped with a Solo engine 2625.from 1 € 566.96 incl. 19% VAT
€ 476.44 -
Throttle valve sensor for Solo 2625 01i and 02i
This throttle valve sensor mounted (Solo part number 23 00 910) is used in the Solo 2625 01i, Solo 2625 01i Neo and 2625 02i.
from 1 € 567.83 incl. 19% VAT
€ 477.17 -
Safety harness Schroth
The seat belts SCHROTH 4-point restraint features the proven and ergonomic SCHROTH rotary actuator. It is light and comfortable, ideal for long flights.
We are selling online only the blue and darkred SCHROTH harness. In addition, Schempp-Hirth gliders can also be equipped with safety harness from Gadringer. If you wish to buy on of these models, please contact the Schempp-Hirth Spare Part.
The harnesses are designed for Schempp-Hirth aircraft.
from 1 € 589.05 incl. 19% VAT
€ 495.00from 1 € 589.05 incl. 19% VAT
€ 495.00from 1 € 589.05 incl. 19% VAT
€ 495.00 -
Ignition coil for Solo 2625 from Ducati
This ignition box from Ducati is used in the Solo 2625-01 and 2625-02 but not for the "i" version. The Solo 2625-01i and 2625-02i need the ignition coil from PVL.
The cable is included.
from 1 € 598.99 incl. 19% VAT
€ 503.35 -
bug-wiper for Ventus-3 and Arcus “20”
These bug-wipers blades are adapted for all the Ventus-3 variants and the Arcus Edition 2020 with garage for bug-wipers.from 1 € 609.14 incl. 19% VAT
€ 511.88 -
Water pump for SOLO 2625
This water pompe is used for all the SOLO engines 2625.from 1 € 652.24 incl. 19% VAT
€ 548.10 -
The "heavy" Schempp-Hirth tailwheel
200x50 with lead
This is the Schempp-Hirth tailwheel, with lead.
This wheel is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance. Thanks to removable lead, it can weigh 2,6 or 3,6 kg.
Another model, without lead, black and weighting 0,930 kg is available. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 683.62 incl. 19% VAT
€ 574.47 -
Tooth belt for Ventus-2cM
This toothed belt is 2400 mm and is adapted for the Ventus-2cM pylon with a Solo 2625-01 engine.from 1 € 691.66 incl. 19% VAT
€ 581.23 -
Wingtip complet wheel, Lindner System, for Arcus
This wingtip wheel is designed for the Arcus. It is aerodynamic but high enough and resistant to drive on the ground.
The item is 236 x 116 x 69 mm and the screws are 165 mm apart.
It sold by the unit and the screws are provided.
from 1 € 708.64 incl. 19% VAT
€ 595.50 -
Wingtip wheel, Lindner System, for Duo Discus and Discus-2c
The Lindner system offers a great compromise between aerodynamic and ease of handling on the ground.
This wingtip wheel is designed for the Duo Discus and the Discus-2c. To install these wheels, your glider need to have the adapted fixation system.
The support, with the wheel, is 211 X 60 x 100 mm and has two holes for screws, that are 165 mm apart.
It is sold by the unit and the screws are included.
from 1 € 708.64 incl. 19% VAT
€ 595.50 -
Wingtip complet wheel, Lindner System, for Ventus-2c
This wingtip wheel is made for the Ventus-2c.
This system is aerodynamic and compact (212 x 95 x 59 mm). In addition it is weighting only 200 g.
It is sold by the unit.
You can to fix it with screws that are included. Look at look wing tip, the holes are 165 mm apart.
from 1 € 708.64 incl. 19% VAT
€ 595.50
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.